Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Developing and Implementing Sustainability-Based Solutions for Bio-Based Plastic Production and Use to Preserve Land and Sea Environmental Quality in Europe

Resultado final

Final bioplastic safety protocol produced and approved

The final bioplastic safety protocol will be produced and will be released.

Policy brief

The report will sum up the information gathered in tasks 4.1, 4.2, 4.3 .

"List of members of the ""European Bioplastics Research Group"""

"List of members of the ""European Bioplastics Research Group"" will be finalized."

Technical Report: Definition of the current EU bioplastic approach to standards defining biodegradability and safety

A single Technical Report, highlighting and synthesising All standards/guidelines and testing methodologies that are used to determine the safety of bioplastics in toys, packaging, foodstuffs and shipping equipment in the EU. The report will also be compared to USA and other global standards.

Handbook on the impacts of bio-based and biodegradable plastics (and additives) on existing waste management frameworks

Analysis of technologies which are applied in the existing waste management practices and their interrelations impacts with endoflife routes of biobased and biodegradable plastics including the additives will be performed including assessment of possibilities to apply principles of circular economy to waste management on political and technical levels starting from city level with possibilities to scaleup in the urban environment The most promising business cases will be identified and viable business models including appropriate financing concepts will be presented with assessment of the integrated impacts of these technologies for upscaling purposes

Support with stakeholder engagement

Assistance with mobilisation of stakeholders. Stakeholders will get access to all project results to help them to engage in plastic waste management and bioplastics production

Report: Strategies for circular innovation of the whole bio-plastics system

The report will sum up a set of strategies for circular innovation of the whole bio-plastics system for exploitation of the Project results.

List of members of the Network of Historic Cities Against Plastic Waste

List of members of the Network of Historic Cities Against Plastic Waste will be finalized.

1 Communication and Visibility Strategy

One strategy to communicate and disseminate the project

Brochures

Project brochure in English will be delivered in month 12 and second one in month 36

Periodical Newsletters 3

Newsletters will be written in English, containing updates achieved within the project. It will be available as PDF and will be delivered periodicaly in months 42 and 48.

Periodical Newsletters 2

Newsletters will be written in English containing updates achieved within the project It will be available as PDF and will be delivered periodicaly in months 24 30 and 36

Final conference

One final conference with all partners and guests

1 Website and presence in social media

One web site and presence in Facebook/Twitter

Periodical Newsletters 1

Newsletters will be written in English, containing updates achieved within the project. It will be available as PDF and will be delivered periodicaly in months 6, 12 and 18.

Video

One project video in English.

Stakeholders training and information sessions 1

Stakeholders training with 10-15 stakeholders across the project partnership will be held in months: 12, 18. Virtual information session will be organized in month 18.

Networking, dissemination and promotion event for stakeholeders 2

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc). Events will be held in months: 24, 30, 36.

Stakeholders training and information sessions 2

Stakeholders training with 10-15 stakeholders across the project partnership will be held in months: 24, 30 and 36. Virtual information session will be organized in month 30.

Networking, dissemination and promotion event for stakeholeders 3

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc).

Networking, dissemination and promotion event for stakeholeders 1

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc). Events will be held in months: 12 and 18.

Stakeholders training and information sessions 3

Stakeholders training with 10-15 stakeholders across the project partnership will be held in month 42.

Publicaciones

Linking bioeconomy, circular economy, and sustainability: Trends, gaps and future orientation in the bio-based and biodegradable plastics industry

Autores: Foschi, E., Aureli, S., & Paletta, A.
Publicado en: European Journal of Social Impact and Circular Economy,, Edición 4/2, 2023, ISSN 2704-9906
Editor: Unito
DOI: 10.13135/2704-9906/7154

Plastic impurities in biowaste treatment: environmental and economic life cycle assessment of a composting plant

Autores: Bottausci S., Magrini C., Tuci G. A., Bonoli A.
Publicado en: Environmental Science and Pollution Research., Edición 31, 2023, Página(s) 9964–9980, ISSN 0944-1344
Editor: Springer Verlag
DOI: 10.1007/s11356-023-28353-8

Assessing Provisions and Requirements for the Sustainable Production of Plastics: Towards Achieving SDG 12 from the Consumers’ Perspective

Autores: Walter Leal Filho ,Jelena Barbir, Pınar Gökçin Özuyar, Enrique Nunez, Jose Manuel Diaz-Sarachaga, Bertrand Guillaume, Rosley Anholon, Izabela Simon Rampasso, Julia Swart, Luis Velazquez and Theam Foo Ng
Publicado en: Sustainability, 2022, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su142416542

Improvement of PBAT Processability and Mechanical Performance by Blending with Pine Resin Derivatives for Injection Moulding Rigid Packaging with Enhanced Hydrophobicity

Autores: Cristina Pavon, Miguel Aldas, Harrison de la Rosa-Ramírez, Juan López-Martínez, Marina P. Arrieta
Publicado en: Polymers, Edición 12/12, 2020, Página(s) 2891, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12122891

Organic Waste Management and Circular Bioeconomy: A Literature Review Comparison between Latin America and the European Union

Autores: Bottausci S., Midence R.., Serrano F., Bonoli A.
Publicado en: Sustainability, Edición 14(3), 2022, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su14031661

Cost competitiveness of sustainable bioplastic feedstocks – A Monte Carlo analysis for polylactic acid

Autores: Claudia Wellenreuther; André Wolf; Nils Zander
Publicado en: Cleaner Engineering and Technology,, Edición Vol 6, Iss ,, 2022, Página(s) Pp 100411, ISSN 2666-7908
Editor: Elsevier
DOI: 10.1016/j.clet.2022.100411

Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts

Autores: Franciszek Pawlak, Miguel Aldas, Francisco Parres, Juan López-Martínez, Marina Patricia Arrieta
Publicado en: Polymers, Edición 12/11, 2020, Página(s) 2523, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12112523

Market dynamics of biodegradable bio-based plastics: projections and linkages to European policies

Autores: Niklas Döhler, Claudia Wellenreuther and André Wolf
Publicado en: EFB Bioeconomy Journal, 2020, ISSN 2667-0410
Editor: Elsevier
DOI: 10.1016/j.bioeco.2022.100028

Recent Advances in Bio-based Functional Additives for Polymers

Autores: Valentina Marturano, Angela Marotta, Sarai Agustin Salazar, Veronica Ambrogi, Pierfrancesco Cerruti
Publicado en: Progress in Materials Science, Edición 139, 2023, ISSN 0079-6425
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.pmatsci.2023.101186

Tube shelters from agricultural plastic waste: An example of circular economy

Autores: J. Martínez Urreaga, F.R. Beltrán, J. Acosta, T. Aguinaco, C. Fonseca, A. Ochoa, J.A. Oliet Palá, C. González-Sánchez, M.U. de la Orden
Publicado en: Journal of Cleaner Production, Edición 268, 2020, Página(s) 122401, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/j.jclepro.2020.122401

Water absorption behavior and physico-chemical and mechanical performance of PLA-based biopolymers filled with degradable glass fibers

Autores: Finocchio, E., Moliner, C., Lagazzo, A., Caputo, S., Arato, E.
Publicado en: Applied Polymer Science, Edición 140, 2023, ISSN 0021-8995
Editor: John Wiley & Sons Inc.
DOI: 10.1002/app.54578

Effect of Yerba Mate and Silk Fibroin Nanoparticles on the Migration Properties in Ethanolic Food Simulants and Composting Disintegrability of Recycled PLA Nanocomposites

Autores: Freddys R. Beltrán; Marina P. Arrieta; Diego Elena Antón; A. Abel Lozano-Pérez; José Luis Cenis; Gerald Gaspar; María U. de la Orden; Joaquín Martínez Urreaga
Publicado en: Polymers, Edición 1, 2021, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym13121925

Degradation of bio-based film plastics in soil under natural conditions

Autores: Radoslaw Slezak, Liliana Krzystek, Michał Puchalski, Izabella Krucińska, Adam Sitarski
Publicado en: Science of the Total Environment, Edición 866, 2023, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2023.161401

Garbage Patches and Their Environmental Implications in a Plastisphere

Autores: Walter Leal Filho; Julian Hunt; Marina Kovaleva
Publicado en: Journal of Marine Science and Engineering,, Edición 4, 2021, Página(s) Vol 9, Iss 1289, p 1289 (2021), ISSN 2077-1312
Editor: MDPI AG
DOI: 10.3390/jmse9111289

Management accounting for circular economy: current limits and avenue for a dialogic approach.

Autores: Aureli S., Foschi E., Paletta A.
Publicado en: Accounting, Auditing & Accountability Journal, 2023, ISSN 0951-3574
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/aaaj-04-2022-5766

Investigation of mechanical recycling effect on electromagnetic properties of polylactic acid (PLA) – nanoclay nanocomposites: Towards a valorization of recycled PLA nanocomposites

Autores: Lakhdar Sidi Salah, Nassira Ouslimani, Yann Danlée, Freddys R. Beltran, Isabelle Huynen, María Ulagares de la Orden
Publicado en: Composites Part C: Open Access, Edición 10, 2023, ISSN 2666-6820
Editor: Elsevier
DOI: 10.1016/j.jcomc.2022.100339

Influence of addition of organic fillers on the properties of mechanically recycled PLA

Autores: Freddys R. Beltrán, Gerald Gaspar, Masoud Dadras Chomachayi, Azam Jalali-Arani, Antonio A. Lozano-Pérez, José L. Cenis, María U. de la Orden, Ernesto Pérez, Joaquín M. Martínez Urreaga
Publicado en: Environmental Science and Pollution Research, 2020, ISSN 0944-1344
Editor: Springer Verlag
DOI: 10.1007/s11356-020-08025-7

Gastric carboxylesterases of the edible crab Cancer pagurus (Crustacea, Decapoda)can hydrolyze biodegradable plastics

Autores: Miksch Lukas, Gutow Lars, Saborowski Reinhard
Publicado en: Emerging Contaminants, Edición 10/1, 2023, ISSN 2405-6650
Editor: Elsevier
DOI: 10.1016/j.emcon.2023.100275

Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes

Autores: Freddys R. Beltrán; Marina P. Arrieta; Eduardo Metola Moreno; Gerald Gaspar; Luisa Martinez Muneta; Ruth Carrasco-Gallego; Susana Yáñez; David Hidalgo-Carvajal; María U. de la Orden; Joaquín Martínez Urreaga
Publicado en: Polymers, Edición 1, 2021, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym13081247

Consumer attitudes and concerns with bioplastics use: An international study

Autores: Walter Leal Filho; Jelena Barbir; Ismaila Rimi Abubakar; Arminda Paço; Zaneta Stasiskiene; Marie Hornbogen; Maren Theresa Christin Fendt; Viktoria Voronova; Marija Klõga
Publicado en: PLosONE, Edición 19326203, 2022, ISSN 1932-6203
Editor: Public Library of Science
DOI: 10.1371/journal.pone.0266918

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

Autores: Masoud Dadras Chomachayi, Azam Jalali-arani, Freddys R. Beltrán, Ma Ulagares de la Orden, Joaquín Martínez Urreaga
Publicado en: Journal of Polymers and the Environment, Edición 28/4, 2020, Página(s) 1252-1264, ISSN 1566-2543
Editor: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s10924-020-01684-0

Effect of bio-based microplastics on earthworms Eisenia andrei

Autores: Ewa Liwarska-Bizukojc, Przemysław Bernat, Anna Jasińska
Publicado en: Science of the Total Environment, Edición 898, 2023, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2023.165423

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Autores: Ignacio Bernabé, Erika Amarilla, María Ulagares de la Orden, Joaquín Martínez Urreaga & Freddys R. Beltrán
Publicado en: Environmental Science and Pollution Research., 2024, ISSN 1614-7499
Editor: Springer-Verlag GmbH Germany
DOI: 10.1007/s11356-023-31758-0

Bioplastics in the Sea: Rapid In-Vitro Evaluation of Degradability and Persistence at Natural Temperatures

Autores: Lukas Miksch; Matthias Köck; Lars Gutow; Reinhard Saborowski
Publicado en: Frontiers in Marine Science, Edición 3, 2022, ISSN 1660-4601
Editor: Frontiers Media S.A.
DOI: 10.3389/fmars.2022.920293

The COVID-19 pandemic and single-use plastic waste in households: A preliminary study

Autores: Walter Leal Filho, Amanda Lange Salvia, Aprajita Minhas, Arminda Paço and Celia Dias-Ferreira
Publicado en: Science of the Total Environment, 2021, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2021.148571

Riverine Plastic Pollution in Asia: Results from a Bibliometric Assessment

Autores: Leal Filho, Walter, Cagdas Dedeoglu, Maria Alzira Pimenta Dinis, Amanda Lange Salvia, Jelena Barbir, Viktoria Voronova, Ismaila Rimi Abubakar, Arvo Iital, Karin Pachel, Fredrik Huthoff, Ayyoob Sharifi, Peter J. Yang, Maris Klavins, and Victoria Omeche Emanche.
Publicado en: Land, 2022, ISSN 2073-445X
Editor: MDPI AG
DOI: 10.3390/land11071117

Development of tri-layer antioxidant packaging systems based on recycled PLA/sodium caseinate/recycled PLA reinforced with lignocellulosic nanoparticles extracted from yerba mate waste

Autores: Marina Patricia Arrieta, Freddys Beltran, Sara Soledad Abarca de las Muelas, Gerald Gaspar, Rafael Sanchez Hernandez, Maria Ulagares de la Orden and Joaquin Martinez Urreaga
Publicado en: Express Polymer Letters, 2022, Página(s) ol. 16 Edición 8, p881-900, ISSN 1788-618X
Editor: Budapesti Muszaki Egyetem, Department of Polymer Engineering
DOI: 10.3144/expresspolymlett.2022.64

Formulation of secondary compounds as additives of biopolymer-based food packaging: A review

Autores: Arash Moeini; Natalie Germann; Mario Malinconico; Gabriella Santagata
Publicado en: Trends in Food Science & Technology, Edición 1, 2021, ISSN 2073-4360
Editor: Elsevier
DOI: 10.1016/j.tifs.2021.05.040

Innovative feedstocks in biodegradable bio-based plastics: a literature review

Autores: Claudia Wellenreuther and André Wolf
Publicado en: HWWI Research Paper, 2020, ISSN 1861-504X
Editor: Hamburg Institute of International Economics

Effect of Iignocellulosic Nanoparticles Extracted from Yerba Mate (Ilex paraguariensis) on the Structural, Thermal, Optical and Barrier Properties of Mechanically Recycled Poly(lactic acid)

Autores: Freddys R. Beltrán, Marina P. Arrieta, Gerald Gaspar, María U. de la Orden, Joaquín Martínez Urreaga
Publicado en: Polymers, Edición 12/8, 2020, Página(s) 1690, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12081690

Addressing Stakeholder Concerns Regarding the Effective Use of Bio-Based and Biodegradable Plastics

Autores: Carly A. Fletcher; Karolina Niemenoja; Rhiannon Hunt; Jill Adams; Alan Dempsey; Craig E. Banks
Publicado en: Resources, Edición 8, 2021, Página(s) Edición 10, ISSN 2079-9276
Editor: MDPI AG
DOI: 10.3390/resources10100095

Assessing the Levels of Awareness among European Citizens about the Direct and Indirect Impacts of Plastics on Human Health

Autores: Jelena Barbir, Walter Leal Filho, Amanda Lange Salvia, Maren Theresa Christin Fendt, Rachel Babaganov, Maria Cristina Albertini, Alessandra Bonoli, Maximilian Lackner, Daniela Müller de Quevedo
Publicado en: International Journal of Environmental Research and Public Health, Edición 18/6, 2021, Página(s) 3116, ISSN 1660-4601
Editor: MDPI
DOI: 10.3390/ijerph18063116

Ultrasonic spray deposition of PEGDE-crosslinked chitosan/graphene oxide coatings for enhancing gas barrier properties of polybutylene succinate films

Autores: Cabrini, A., Ghalayani Esfahani, A., Petraconi, A., Lavorgna, M., De Nardo, L., Buonocore, G. G., ... & Cerruti, P.
Publicado en: Progress in Organic Coatings, Edición 183, 2023, ISSN 0300-9440
Editor: Elsevier BV
DOI: 10.1016/j.porgcoat.2023.107760

Ulomoides dermestoides Coleopteran action on Thermoplastic Starch/Poly (lactic acid) films biodegradation: a novel, challenging and sustainable approach for a fast mineralization process

Autores: M. del Rosario Salazar-Sanchez , B. Immirzi , Jos´e F. Solanilla-Duque, D. Zannini, M. Malinconico, G. Santagata
Publicado en: Carbohydrate Polymers, Edición 279, 2022, ISSN 0144-8617
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.carbpol.2021.118989

Perceived effectiveness and sustainability of face masks among German citizens during the 2nd wave of the COVID-19 pandemic – a cross-sectional study

Autores: Fendt MT, Leal Filho W, Barbir J and Boenecke J
Publicado en: Frontiers in Public Health, 2021, ISSN 2296-2565
Editor: Frontiers Media S.A.
DOI: 10.3389/fpubh.2022.768454

pH-Stat Titration: A Rapid Assay for Enzymatic Degradability of Bio-Based Polymers

Autores: Lukas Miksch, Lars Gutow, Reinhard Saborowski
Publicado en: Polymers, Edición 13/6, 2021, Página(s) 860, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym13060860

Application of a small scale-terrestrial model ecosystem (STME) for assessment of ecotoxicity of bio-based plastics

Autores: Ewa Liwarska-Bizukojc
Publicado en: Science of the Total Environment, 2022, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2022.154353

An assessment of attitudes towards plastics and bioplastics in Europe

Autores: Walter Leal Filho, Amanda Lange Salvia, Alessandra Bonoli, Ulla A. Saari, Viktoria Voronova, Marija Klõga, Sonali Suraj Kumbhar, Katharina Olszewski, Daniela Müller De Quevedo, Jelena Barbir
Publicado en: Science of The Total Environment, Edición 755, 2021, Página(s) 142732, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2020.142732

Phytotoxicity assessment of biodegradable and non-biodegradable plastics using seed germination and early growth tests

Autores: Ewa Liwarska-Bizukojc
Publicado en: Chemosphere, 2022, ISSN 0045-6535
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.chemosphere.2021.133132

Assessing ecotoxicity of an innovative bio-based mulch film: a multi-environmental and multi-bioassay approach

Autores: J. Barbir, E. Arato, C-Y. Chen, M. Granberg, L. Gutow, A-S. Krång, S. D. Kröger, W. Leal Filho, E. Liwarska-Bizukojc, L. Miksch, K. Paetz, M. Prodana, R. Saborowski, R. Silva Rojas and G. Witt
Publicado en: Frontiers in Environmental Science, Edición 11, 2023, ISSN 2296-665X
Editor: Frontiers
DOI: 10.3389/fenvs.2023.1171261

Challenges and Strategies for Bio-Based and Biodegradable Plastic Waste Management in Europe

Autores: Stasiskiene, Z., Barbir, J. et al.
Publicado en: Sustainability, 2022, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su142416476

Thermomechanical Properties and Biodegradation Behavior of Itaconic Anhydride-Grafted PLA/Pecan Nutshell Biocomposites

Autores: Agustin-Salazar, S., Ricciulli, M., Ambrogi, V., Cerruti, P., & Scarinzi, G.
Publicado en: Polymers, Edición 14(24), 2022, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym14245532

Effect of Innovative Bio-Based Plastics on Early Growth of Higher Plants

Autores: Ewa Liwarska-Bizukojc
Publicado en: Polymers, Edición 15(2), 2023, ISSN 2073-4360
Editor: MDPU
DOI: 10.3390/polym15020438

Effect of solid-state polymerization on the structure and properties of mechanically recycled poly(lactic acid)

Autores: Freddys R. Beltrán, Esteban Climent-Pascual, María U. de la Orden, Joaquín Martínez Urreaga
Publicado en: Polymer Degradation and Stability, Edición 171, 2020, Página(s) 109045, ISSN 0141-3910
Editor: Elsevier BV
DOI: 10.1016/j.polymdegradstab.2019.109045

Edible Polymers and Secondary Bioactive Compounds for Food Packaging Applications: Antimicrobial, Mechanical, and Gas Barrier Properties

Autores: Moeini, A.; Pedram, P.; Fattahi, E.; Cerruti, P.; Santagata, G.
Publicado en: Polymers, Edición 14(12), 2022, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym14122395

Bio-Polyester/Rubber Compounds: Fabrication, Characterization, and Biodegradation

Autores: Frank C, Emmerstorfer-Augustin A, Rath T, Trimmel G, Nachtnebel M, Stelzer F.
Publicado en: Polymers, Edición 15(12), 2023, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym15122593

Effect of (bio)plastics on soil environment: A review

Autores: Ewa Liwarska-Bizukojc
Publicado en: Science of the Total Environment, 2021, ISSN 0048-9697
Editor: Elsevier BV
DOI: 10.1016/j.scitotenv.2021.148889

Effects of solid-state polymerization on the structure and properties of degraded poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Autores: I. Bernabé Vírseda, F.R. Beltrán, M.U de la Orden and J. Martínez Urreaga
Publicado en: Polymer Degradation and Stability, Edición 220, 2024, ISSN 0141-3910
Editor: Elsevier BV
DOI: 10.1016/j.polymdegradstab.2023.110630

From cooperation to collaboration: value co creation and preservation for circular bio-economy

Autores: Eleonora Foschi, Angelo Paletta, Genc Alimehmeti
Publicado en: International Conference on New Business Model Conference,, 2023
Editor: N/A

Solid-state polymerization on degraded PHBV: A cheap and effective alternative for biopolymer revalorization

Autores: I. Bernabé Vírseda, F.R Beltrán, M.U de la Orden, J. Martínez Urreaga
Publicado en: 10th International Conference on Sustainable Solid Waste Management, 2023
Editor: N/A

Industrial composting of biodegradable plastic packaging: Lab-scale and on-field disintegration tests

Autores: ZK Chong, K Kuchta
Publicado en: Proceedings: 6th Symposium on Circular Economy and Urban Mining, 2022
Editor: N/A

Accounting for circular bioeconomy: reflections from the case study of a value network in the bio-based plastic sector.

Autores: Foschi, E., Aureli, S., & Paletta, A.
Publicado en: Conference of the Environmental and Sustainability Management Accounting Network,, 2023
Editor: N/A

Effects of bio-based microplastics on plants and earthworms in the microcosm experiments

Autores: Ewa Liwarska-Bizukojc
Publicado en: 10th International Conference on Sustainable Solid Waste Management, 21-24 June, Chania, Greece, 2023
Editor: N/A

Recycling of plastic tube shelters: characterization of the degradation and contamination

Autores: I. Bernabé, S. Rivera, C. Perou, F.R. Beltrán, M.U. de la Orden, E. Blázquez-Blázquez, M. L. Cerrada, J. Martínez Urreaga
Publicado en: 10th International Conference on Sustainable Solid Waste Management, 2023
Editor: N/A

Technical Evaluation of Mechanical Recycling of PLA 3D Printing Wastes

Autores: Freddys R. Beltrán González, Eduardo Moreno, Marina Arrieta, Gerald Gaspar, María Martínez Muneta, Ruth Carrasco, Susana Yañez, David Hidalgo, María de la Orden, Joaquín Martínez Urreaga
Publicado en: Proceedings of The First International Conference on “Green” Polymer Materials 2020, 2020, Página(s) 7187
Editor: MDPI
DOI: 10.3390/cgpm2020-07187

Degradation kinetics of bio-based plastics is soil under natural conditions

Autores: R. Ślęzak, L. Krzystek
Publicado en: "XIV National Scientific Conference „Advances in Bioreactor Engineering"", 25–27 września 2023 r., Konopnica, Poland, p. 128-132", 2023, ISBN 978-83-66741-57-7
Editor: N/A

Effect of accelerated ageing and mechanical recycling on the structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) formulations

Autores: I. Bernabé, E. Amarilla, L. Calleja, M.U. de la Orden, J. Martínez Urreaga, F.R. Beltrán
Publicado en: 10th International Conference on Sustainable Solid Waste Management, 2023
Editor: N/A

Effect of (bio)plastics on the soil ecosystem

Autores: Ewa Liwarska-Bizukojc
Publicado en: Central European Conference ECOpole’20, 7-10 October 2020, Kraków, Poland, 2020
Editor: N/A

Developing and implementing sustainability based solutions for bio-based plastic production and use to preserve land and sea environmental quality in Europe

Autores: R. Ślęzak, L. Krzystek, E. Liwarska-Bizukojć
Publicado en: "IV National Scientific Conference ""Biopolymers - a source of new materials"" , 3. 09. 2020, Lublin, Poland, p. 38-39", 2020, ISBN 978-83-66261-66-2
Editor: N/A

Assessing Readiness of Greek municipalities to introduce bio-based materials in waste management streams

Autores: Jelena Barbir, Alexandros Lingos, Eleonora Foschi, Zaneta Stasiskiene, Constantina Skanavis, Walter Leal Filho
Publicado en: International Conference on Sustainable Solid Waste Management,, 2023
Editor: N/A

Entwicklung und Implementierung nachhaltiger Lösungen für die Herstellung und Nutzung biobasierter Kunststoffe

Autores: K Kuchta, ZK Chong
Publicado en: Bioabfall- und stoffspezifische Verwertung III, 2021, ISBN 3-928673-80-7
Editor: Tuhh

Are Biodegradable Plastics The Future For Agricultural Mulch Film Applications?

Autores: Eleonora Foschi, Genc Alimehmeti, Selena Aureli, Angelo Paletta
Publicado en: ALMADL, 2023, ISSN 2038-7954
Editor: Università di Bologna
DOI: 10.6092/unibo/amsacta/7385

Handbook on the impacts of bio-based and biodegradable plastics on existing waste management frameworks

Autores: Žaneta Stasiškienė, Lina Draudvilienė, Jūratė Petkevičienė, Kastytis Pamakštys, Zhi Kai Chong, Kerstin Kuchta, Viktoria Voronova, Anna Fråne, Daniel Menchaca Martínez, Jelena Barbir, Franz Stelzer, Tan Ru Shien, Elisabetta Bottazzoli, Lorena Affatato, Carly Fletcher, Alessandra Bonoli, Liliana Krzystek, Lars Gutow, Anita Emmerstorfer-Augustin, Paola Stagnaro, Laurent Belard, Mariana Din
Publicado en: 2022
Editor: N/A

Are Bio-Based Plastics The Future For Toy Applications?

Autores: Foschi, Eleonora ; Paletta, Angelo ; Mersico, Luigi ; Aureli, Selena ; Alimehmeti, Genc
Publicado en: ALMADL, 2023, ISSN 2038-7954
Editor: Università di Bologna
DOI: 10.6092/unibo/amsacta/7221

Moving from Conventional Plastics to Sustainable Solutions – Assessing Human Willingness to Change Current Practices

Autores: Barbir, J. et al.
Publicado en: Handbook of Sustainability Science in the Future, 2022
Editor: Springer, Cham.
DOI: 10.1007/978-3-030-68074-9_82-1

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles