Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Developing and Implementing Sustainability-Based Solutions for Bio-Based Plastic Production and Use to Preserve Land and Sea Environmental Quality in Europe

Rezultaty

Final bioplastic safety protocol produced and approved

The final bioplastic safety protocol will be produced and will be released.

Policy brief

The report will sum up the information gathered in tasks 4.1, 4.2, 4.3 .

"List of members of the ""European Bioplastics Research Group"""

"List of members of the ""European Bioplastics Research Group"" will be finalized."

Technical Report: Definition of the current EU bioplastic approach to standards defining biodegradability and safety

A single Technical Report, highlighting and synthesising All standards/guidelines and testing methodologies that are used to determine the safety of bioplastics in toys, packaging, foodstuffs and shipping equipment in the EU. The report will also be compared to USA and other global standards.

Handbook on the impacts of bio-based and biodegradable plastics (and additives) on existing waste management frameworks

Analysis of technologies which are applied in the existing waste management practices and their interrelations impacts with endoflife routes of biobased and biodegradable plastics including the additives will be performed including assessment of possibilities to apply principles of circular economy to waste management on political and technical levels starting from city level with possibilities to scaleup in the urban environment The most promising business cases will be identified and viable business models including appropriate financing concepts will be presented with assessment of the integrated impacts of these technologies for upscaling purposes

Support with stakeholder engagement

Assistance with mobilisation of stakeholders. Stakeholders will get access to all project results to help them to engage in plastic waste management and bioplastics production

Report: Strategies for circular innovation of the whole bio-plastics system

The report will sum up a set of strategies for circular innovation of the whole bio-plastics system for exploitation of the Project results.

List of members of the Network of Historic Cities Against Plastic Waste

List of members of the Network of Historic Cities Against Plastic Waste will be finalized.

1 Communication and Visibility Strategy

One strategy to communicate and disseminate the project

Brochures

Project brochure in English will be delivered in month 12 and second one in month 36

Periodical Newsletters 3

Newsletters will be written in English, containing updates achieved within the project. It will be available as PDF and will be delivered periodicaly in months 42 and 48.

Periodical Newsletters 2

Newsletters will be written in English containing updates achieved within the project It will be available as PDF and will be delivered periodicaly in months 24 30 and 36

Final conference

One final conference with all partners and guests

1 Website and presence in social media

One web site and presence in Facebook/Twitter

Periodical Newsletters 1

Newsletters will be written in English, containing updates achieved within the project. It will be available as PDF and will be delivered periodicaly in months 6, 12 and 18.

Video

One project video in English.

Stakeholders training and information sessions 1

Stakeholders training with 10-15 stakeholders across the project partnership will be held in months: 12, 18. Virtual information session will be organized in month 18.

Networking, dissemination and promotion event for stakeholeders 2

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc). Events will be held in months: 24, 30, 36.

Stakeholders training and information sessions 2

Stakeholders training with 10-15 stakeholders across the project partnership will be held in months: 24, 30 and 36. Virtual information session will be organized in month 30.

Networking, dissemination and promotion event for stakeholeders 3

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc).

Networking, dissemination and promotion event for stakeholeders 1

Events with national and international stakeholders for promotion of the project. The events will be organised to promote the project and inform the stakeholders mentioned in the application (plastic companies, businesses, universities, etc). Events will be held in months: 12 and 18.

Stakeholders training and information sessions 3

Stakeholders training with 10-15 stakeholders across the project partnership will be held in month 42.

Publikacje

Linking bioeconomy, circular economy, and sustainability: Trends, gaps and future orientation in the bio-based and biodegradable plastics industry

Autorzy: Foschi, E., Aureli, S., & Paletta, A.
Opublikowane w: European Journal of Social Impact and Circular Economy,, Numer 4/2, 2023, ISSN 2704-9906
Wydawca: Unito
DOI: 10.13135/2704-9906/7154

Plastic impurities in biowaste treatment: environmental and economic life cycle assessment of a composting plant

Autorzy: Bottausci S., Magrini C., Tuci G. A., Bonoli A.
Opublikowane w: Environmental Science and Pollution Research., Numer 31, 2023, Strona(/y) 9964–9980, ISSN 0944-1344
Wydawca: Springer Verlag
DOI: 10.1007/s11356-023-28353-8

Assessing Provisions and Requirements for the Sustainable Production of Plastics: Towards Achieving SDG 12 from the Consumers’ Perspective

Autorzy: Walter Leal Filho ,Jelena Barbir, Pınar Gökçin Özuyar, Enrique Nunez, Jose Manuel Diaz-Sarachaga, Bertrand Guillaume, Rosley Anholon, Izabela Simon Rampasso, Julia Swart, Luis Velazquez and Theam Foo Ng
Opublikowane w: Sustainability, 2022, ISSN 2071-1050
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/su142416542

Improvement of PBAT Processability and Mechanical Performance by Blending with Pine Resin Derivatives for Injection Moulding Rigid Packaging with Enhanced Hydrophobicity

Autorzy: Cristina Pavon, Miguel Aldas, Harrison de la Rosa-Ramírez, Juan López-Martínez, Marina P. Arrieta
Opublikowane w: Polymers, Numer 12/12, 2020, Strona(/y) 2891, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym12122891

Organic Waste Management and Circular Bioeconomy: A Literature Review Comparison between Latin America and the European Union

Autorzy: Bottausci S., Midence R.., Serrano F., Bonoli A.
Opublikowane w: Sustainability, Numer 14(3), 2022, ISSN 2071-1050
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/su14031661

Cost competitiveness of sustainable bioplastic feedstocks – A Monte Carlo analysis for polylactic acid

Autorzy: Claudia Wellenreuther; André Wolf; Nils Zander
Opublikowane w: Cleaner Engineering and Technology,, Numer Vol 6, Iss ,, 2022, Strona(/y) Pp 100411, ISSN 2666-7908
Wydawca: Elsevier
DOI: 10.1016/j.clet.2022.100411

Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts

Autorzy: Franciszek Pawlak, Miguel Aldas, Francisco Parres, Juan López-Martínez, Marina Patricia Arrieta
Opublikowane w: Polymers, Numer 12/11, 2020, Strona(/y) 2523, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym12112523

Market dynamics of biodegradable bio-based plastics: projections and linkages to European policies

Autorzy: Niklas Döhler, Claudia Wellenreuther and André Wolf
Opublikowane w: EFB Bioeconomy Journal, 2020, ISSN 2667-0410
Wydawca: Elsevier
DOI: 10.1016/j.bioeco.2022.100028

Recent Advances in Bio-based Functional Additives for Polymers

Autorzy: Valentina Marturano, Angela Marotta, Sarai Agustin Salazar, Veronica Ambrogi, Pierfrancesco Cerruti
Opublikowane w: Progress in Materials Science, Numer 139, 2023, ISSN 0079-6425
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.pmatsci.2023.101186

Tube shelters from agricultural plastic waste: An example of circular economy

Autorzy: J. Martínez Urreaga, F.R. Beltrán, J. Acosta, T. Aguinaco, C. Fonseca, A. Ochoa, J.A. Oliet Palá, C. González-Sánchez, M.U. de la Orden
Opublikowane w: Journal of Cleaner Production, Numer 268, 2020, Strona(/y) 122401, ISSN 0959-6526
Wydawca: Elsevier BV
DOI: 10.1016/j.jclepro.2020.122401

Water absorption behavior and physico-chemical and mechanical performance of PLA-based biopolymers filled with degradable glass fibers

Autorzy: Finocchio, E., Moliner, C., Lagazzo, A., Caputo, S., Arato, E.
Opublikowane w: Applied Polymer Science, Numer 140, 2023, ISSN 0021-8995
Wydawca: John Wiley & Sons Inc.
DOI: 10.1002/app.54578

Effect of Yerba Mate and Silk Fibroin Nanoparticles on the Migration Properties in Ethanolic Food Simulants and Composting Disintegrability of Recycled PLA Nanocomposites

Autorzy: Freddys R. Beltrán; Marina P. Arrieta; Diego Elena Antón; A. Abel Lozano-Pérez; José Luis Cenis; Gerald Gaspar; María U. de la Orden; Joaquín Martínez Urreaga
Opublikowane w: Polymers, Numer 1, 2021, ISSN 2073-4360
Wydawca: MDPI AG
DOI: 10.3390/polym13121925

Degradation of bio-based film plastics in soil under natural conditions

Autorzy: Radoslaw Slezak, Liliana Krzystek, Michał Puchalski, Izabella Krucińska, Adam Sitarski
Opublikowane w: Science of the Total Environment, Numer 866, 2023, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2023.161401

Garbage Patches and Their Environmental Implications in a Plastisphere

Autorzy: Walter Leal Filho; Julian Hunt; Marina Kovaleva
Opublikowane w: Journal of Marine Science and Engineering,, Numer 4, 2021, Strona(/y) Vol 9, Iss 1289, p 1289 (2021), ISSN 2077-1312
Wydawca: MDPI AG
DOI: 10.3390/jmse9111289

Management accounting for circular economy: current limits and avenue for a dialogic approach.

Autorzy: Aureli S., Foschi E., Paletta A.
Opublikowane w: Accounting, Auditing & Accountability Journal, 2023, ISSN 0951-3574
Wydawca: Emerald Group Publishing Ltd.
DOI: 10.1108/aaaj-04-2022-5766

Investigation of mechanical recycling effect on electromagnetic properties of polylactic acid (PLA) – nanoclay nanocomposites: Towards a valorization of recycled PLA nanocomposites

Autorzy: Lakhdar Sidi Salah, Nassira Ouslimani, Yann Danlée, Freddys R. Beltran, Isabelle Huynen, María Ulagares de la Orden
Opublikowane w: Composites Part C: Open Access, Numer 10, 2023, ISSN 2666-6820
Wydawca: Elsevier
DOI: 10.1016/j.jcomc.2022.100339

Influence of addition of organic fillers on the properties of mechanically recycled PLA

Autorzy: Freddys R. Beltrán, Gerald Gaspar, Masoud Dadras Chomachayi, Azam Jalali-Arani, Antonio A. Lozano-Pérez, José L. Cenis, María U. de la Orden, Ernesto Pérez, Joaquín M. Martínez Urreaga
Opublikowane w: Environmental Science and Pollution Research, 2020, ISSN 0944-1344
Wydawca: Springer Verlag
DOI: 10.1007/s11356-020-08025-7

Gastric carboxylesterases of the edible crab Cancer pagurus (Crustacea, Decapoda)can hydrolyze biodegradable plastics

Autorzy: Miksch Lukas, Gutow Lars, Saborowski Reinhard
Opublikowane w: Emerging Contaminants, Numer 10/1, 2023, ISSN 2405-6650
Wydawca: Elsevier
DOI: 10.1016/j.emcon.2023.100275

Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes

Autorzy: Freddys R. Beltrán; Marina P. Arrieta; Eduardo Metola Moreno; Gerald Gaspar; Luisa Martinez Muneta; Ruth Carrasco-Gallego; Susana Yáñez; David Hidalgo-Carvajal; María U. de la Orden; Joaquín Martínez Urreaga
Opublikowane w: Polymers, Numer 1, 2021, ISSN 2073-4360
Wydawca: MDPI AG
DOI: 10.3390/polym13081247

Consumer attitudes and concerns with bioplastics use: An international study

Autorzy: Walter Leal Filho; Jelena Barbir; Ismaila Rimi Abubakar; Arminda Paço; Zaneta Stasiskiene; Marie Hornbogen; Maren Theresa Christin Fendt; Viktoria Voronova; Marija Klõga
Opublikowane w: PLosONE, Numer 19326203, 2022, ISSN 1932-6203
Wydawca: Public Library of Science
DOI: 10.1371/journal.pone.0266918

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

Autorzy: Masoud Dadras Chomachayi, Azam Jalali-arani, Freddys R. Beltrán, Ma Ulagares de la Orden, Joaquín Martínez Urreaga
Opublikowane w: Journal of Polymers and the Environment, Numer 28/4, 2020, Strona(/y) 1252-1264, ISSN 1566-2543
Wydawca: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s10924-020-01684-0

Effect of bio-based microplastics on earthworms Eisenia andrei

Autorzy: Ewa Liwarska-Bizukojc, Przemysław Bernat, Anna Jasińska
Opublikowane w: Science of the Total Environment, Numer 898, 2023, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2023.165423

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Autorzy: Ignacio Bernabé, Erika Amarilla, María Ulagares de la Orden, Joaquín Martínez Urreaga & Freddys R. Beltrán
Opublikowane w: Environmental Science and Pollution Research., 2024, ISSN 1614-7499
Wydawca: Springer-Verlag GmbH Germany
DOI: 10.1007/s11356-023-31758-0

Bioplastics in the Sea: Rapid In-Vitro Evaluation of Degradability and Persistence at Natural Temperatures

Autorzy: Lukas Miksch; Matthias Köck; Lars Gutow; Reinhard Saborowski
Opublikowane w: Frontiers in Marine Science, Numer 3, 2022, ISSN 1660-4601
Wydawca: Frontiers Media S.A.
DOI: 10.3389/fmars.2022.920293

The COVID-19 pandemic and single-use plastic waste in households: A preliminary study

Autorzy: Walter Leal Filho, Amanda Lange Salvia, Aprajita Minhas, Arminda Paço and Celia Dias-Ferreira
Opublikowane w: Science of the Total Environment, 2021, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2021.148571

Riverine Plastic Pollution in Asia: Results from a Bibliometric Assessment

Autorzy: Leal Filho, Walter, Cagdas Dedeoglu, Maria Alzira Pimenta Dinis, Amanda Lange Salvia, Jelena Barbir, Viktoria Voronova, Ismaila Rimi Abubakar, Arvo Iital, Karin Pachel, Fredrik Huthoff, Ayyoob Sharifi, Peter J. Yang, Maris Klavins, and Victoria Omeche Emanche.
Opublikowane w: Land, 2022, ISSN 2073-445X
Wydawca: MDPI AG
DOI: 10.3390/land11071117

Development of tri-layer antioxidant packaging systems based on recycled PLA/sodium caseinate/recycled PLA reinforced with lignocellulosic nanoparticles extracted from yerba mate waste

Autorzy: Marina Patricia Arrieta, Freddys Beltran, Sara Soledad Abarca de las Muelas, Gerald Gaspar, Rafael Sanchez Hernandez, Maria Ulagares de la Orden and Joaquin Martinez Urreaga
Opublikowane w: Express Polymer Letters, 2022, Strona(/y) ol. 16 Numer 8, p881-900, ISSN 1788-618X
Wydawca: Budapesti Muszaki Egyetem, Department of Polymer Engineering
DOI: 10.3144/expresspolymlett.2022.64

Formulation of secondary compounds as additives of biopolymer-based food packaging: A review

Autorzy: Arash Moeini; Natalie Germann; Mario Malinconico; Gabriella Santagata
Opublikowane w: Trends in Food Science & Technology, Numer 1, 2021, ISSN 2073-4360
Wydawca: Elsevier
DOI: 10.1016/j.tifs.2021.05.040

Innovative feedstocks in biodegradable bio-based plastics: a literature review

Autorzy: Claudia Wellenreuther and André Wolf
Opublikowane w: HWWI Research Paper, 2020, ISSN 1861-504X
Wydawca: Hamburg Institute of International Economics

Effect of Iignocellulosic Nanoparticles Extracted from Yerba Mate (Ilex paraguariensis) on the Structural, Thermal, Optical and Barrier Properties of Mechanically Recycled Poly(lactic acid)

Autorzy: Freddys R. Beltrán, Marina P. Arrieta, Gerald Gaspar, María U. de la Orden, Joaquín Martínez Urreaga
Opublikowane w: Polymers, Numer 12/8, 2020, Strona(/y) 1690, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym12081690

Addressing Stakeholder Concerns Regarding the Effective Use of Bio-Based and Biodegradable Plastics

Autorzy: Carly A. Fletcher; Karolina Niemenoja; Rhiannon Hunt; Jill Adams; Alan Dempsey; Craig E. Banks
Opublikowane w: Resources, Numer 8, 2021, Strona(/y) Numer 10, ISSN 2079-9276
Wydawca: MDPI AG
DOI: 10.3390/resources10100095

Assessing the Levels of Awareness among European Citizens about the Direct and Indirect Impacts of Plastics on Human Health

Autorzy: Jelena Barbir, Walter Leal Filho, Amanda Lange Salvia, Maren Theresa Christin Fendt, Rachel Babaganov, Maria Cristina Albertini, Alessandra Bonoli, Maximilian Lackner, Daniela Müller de Quevedo
Opublikowane w: International Journal of Environmental Research and Public Health, Numer 18/6, 2021, Strona(/y) 3116, ISSN 1660-4601
Wydawca: MDPI
DOI: 10.3390/ijerph18063116

Ultrasonic spray deposition of PEGDE-crosslinked chitosan/graphene oxide coatings for enhancing gas barrier properties of polybutylene succinate films

Autorzy: Cabrini, A., Ghalayani Esfahani, A., Petraconi, A., Lavorgna, M., De Nardo, L., Buonocore, G. G., ... & Cerruti, P.
Opublikowane w: Progress in Organic Coatings, Numer 183, 2023, ISSN 0300-9440
Wydawca: Elsevier BV
DOI: 10.1016/j.porgcoat.2023.107760

Ulomoides dermestoides Coleopteran action on Thermoplastic Starch/Poly (lactic acid) films biodegradation: a novel, challenging and sustainable approach for a fast mineralization process

Autorzy: M. del Rosario Salazar-Sanchez , B. Immirzi , Jos´e F. Solanilla-Duque, D. Zannini, M. Malinconico, G. Santagata
Opublikowane w: Carbohydrate Polymers, Numer 279, 2022, ISSN 0144-8617
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.carbpol.2021.118989

Perceived effectiveness and sustainability of face masks among German citizens during the 2nd wave of the COVID-19 pandemic – a cross-sectional study

Autorzy: Fendt MT, Leal Filho W, Barbir J and Boenecke J
Opublikowane w: Frontiers in Public Health, 2021, ISSN 2296-2565
Wydawca: Frontiers Media S.A.
DOI: 10.3389/fpubh.2022.768454

pH-Stat Titration: A Rapid Assay for Enzymatic Degradability of Bio-Based Polymers

Autorzy: Lukas Miksch, Lars Gutow, Reinhard Saborowski
Opublikowane w: Polymers, Numer 13/6, 2021, Strona(/y) 860, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym13060860

Application of a small scale-terrestrial model ecosystem (STME) for assessment of ecotoxicity of bio-based plastics

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: Science of the Total Environment, 2022, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2022.154353

An assessment of attitudes towards plastics and bioplastics in Europe

Autorzy: Walter Leal Filho, Amanda Lange Salvia, Alessandra Bonoli, Ulla A. Saari, Viktoria Voronova, Marija Klõga, Sonali Suraj Kumbhar, Katharina Olszewski, Daniela Müller De Quevedo, Jelena Barbir
Opublikowane w: Science of The Total Environment, Numer 755, 2021, Strona(/y) 142732, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2020.142732

Phytotoxicity assessment of biodegradable and non-biodegradable plastics using seed germination and early growth tests

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: Chemosphere, 2022, ISSN 0045-6535
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.chemosphere.2021.133132

Assessing ecotoxicity of an innovative bio-based mulch film: a multi-environmental and multi-bioassay approach

Autorzy: J. Barbir, E. Arato, C-Y. Chen, M. Granberg, L. Gutow, A-S. Krång, S. D. Kröger, W. Leal Filho, E. Liwarska-Bizukojc, L. Miksch, K. Paetz, M. Prodana, R. Saborowski, R. Silva Rojas and G. Witt
Opublikowane w: Frontiers in Environmental Science, Numer 11, 2023, ISSN 2296-665X
Wydawca: Frontiers
DOI: 10.3389/fenvs.2023.1171261

Challenges and Strategies for Bio-Based and Biodegradable Plastic Waste Management in Europe

Autorzy: Stasiskiene, Z., Barbir, J. et al.
Opublikowane w: Sustainability, 2022, ISSN 2071-1050
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/su142416476

Thermomechanical Properties and Biodegradation Behavior of Itaconic Anhydride-Grafted PLA/Pecan Nutshell Biocomposites

Autorzy: Agustin-Salazar, S., Ricciulli, M., Ambrogi, V., Cerruti, P., & Scarinzi, G.
Opublikowane w: Polymers, Numer 14(24), 2022, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym14245532

Effect of Innovative Bio-Based Plastics on Early Growth of Higher Plants

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: Polymers, Numer 15(2), 2023, ISSN 2073-4360
Wydawca: MDPU
DOI: 10.3390/polym15020438

Effect of solid-state polymerization on the structure and properties of mechanically recycled poly(lactic acid)

Autorzy: Freddys R. Beltrán, Esteban Climent-Pascual, María U. de la Orden, Joaquín Martínez Urreaga
Opublikowane w: Polymer Degradation and Stability, Numer 171, 2020, Strona(/y) 109045, ISSN 0141-3910
Wydawca: Elsevier BV
DOI: 10.1016/j.polymdegradstab.2019.109045

Edible Polymers and Secondary Bioactive Compounds for Food Packaging Applications: Antimicrobial, Mechanical, and Gas Barrier Properties

Autorzy: Moeini, A.; Pedram, P.; Fattahi, E.; Cerruti, P.; Santagata, G.
Opublikowane w: Polymers, Numer 14(12), 2022, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym14122395

Bio-Polyester/Rubber Compounds: Fabrication, Characterization, and Biodegradation

Autorzy: Frank C, Emmerstorfer-Augustin A, Rath T, Trimmel G, Nachtnebel M, Stelzer F.
Opublikowane w: Polymers, Numer 15(12), 2023, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym15122593

Effect of (bio)plastics on soil environment: A review

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: Science of the Total Environment, 2021, ISSN 0048-9697
Wydawca: Elsevier BV
DOI: 10.1016/j.scitotenv.2021.148889

Effects of solid-state polymerization on the structure and properties of degraded poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Autorzy: I. Bernabé Vírseda, F.R. Beltrán, M.U de la Orden and J. Martínez Urreaga
Opublikowane w: Polymer Degradation and Stability, Numer 220, 2024, ISSN 0141-3910
Wydawca: Elsevier BV
DOI: 10.1016/j.polymdegradstab.2023.110630

From cooperation to collaboration: value co creation and preservation for circular bio-economy

Autorzy: Eleonora Foschi, Angelo Paletta, Genc Alimehmeti
Opublikowane w: International Conference on New Business Model Conference,, 2023
Wydawca: N/A

Solid-state polymerization on degraded PHBV: A cheap and effective alternative for biopolymer revalorization

Autorzy: I. Bernabé Vírseda, F.R Beltrán, M.U de la Orden, J. Martínez Urreaga
Opublikowane w: 10th International Conference on Sustainable Solid Waste Management, 2023
Wydawca: N/A

Industrial composting of biodegradable plastic packaging: Lab-scale and on-field disintegration tests

Autorzy: ZK Chong, K Kuchta
Opublikowane w: Proceedings: 6th Symposium on Circular Economy and Urban Mining, 2022
Wydawca: N/A

Accounting for circular bioeconomy: reflections from the case study of a value network in the bio-based plastic sector.

Autorzy: Foschi, E., Aureli, S., & Paletta, A.
Opublikowane w: Conference of the Environmental and Sustainability Management Accounting Network,, 2023
Wydawca: N/A

Effects of bio-based microplastics on plants and earthworms in the microcosm experiments

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: 10th International Conference on Sustainable Solid Waste Management, 21-24 June, Chania, Greece, 2023
Wydawca: N/A

Recycling of plastic tube shelters: characterization of the degradation and contamination

Autorzy: I. Bernabé, S. Rivera, C. Perou, F.R. Beltrán, M.U. de la Orden, E. Blázquez-Blázquez, M. L. Cerrada, J. Martínez Urreaga
Opublikowane w: 10th International Conference on Sustainable Solid Waste Management, 2023
Wydawca: N/A

Technical Evaluation of Mechanical Recycling of PLA 3D Printing Wastes

Autorzy: Freddys R. Beltrán González, Eduardo Moreno, Marina Arrieta, Gerald Gaspar, María Martínez Muneta, Ruth Carrasco, Susana Yañez, David Hidalgo, María de la Orden, Joaquín Martínez Urreaga
Opublikowane w: Proceedings of The First International Conference on “Green” Polymer Materials 2020, 2020, Strona(/y) 7187
Wydawca: MDPI
DOI: 10.3390/cgpm2020-07187

Degradation kinetics of bio-based plastics is soil under natural conditions

Autorzy: R. Ślęzak, L. Krzystek
Opublikowane w: "XIV National Scientific Conference „Advances in Bioreactor Engineering"", 25–27 września 2023 r., Konopnica, Poland, p. 128-132", 2023, ISBN 978-83-66741-57-7
Wydawca: N/A

Effect of accelerated ageing and mechanical recycling on the structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) formulations

Autorzy: I. Bernabé, E. Amarilla, L. Calleja, M.U. de la Orden, J. Martínez Urreaga, F.R. Beltrán
Opublikowane w: 10th International Conference on Sustainable Solid Waste Management, 2023
Wydawca: N/A

Effect of (bio)plastics on the soil ecosystem

Autorzy: Ewa Liwarska-Bizukojc
Opublikowane w: Central European Conference ECOpole’20, 7-10 October 2020, Kraków, Poland, 2020
Wydawca: N/A

Developing and implementing sustainability based solutions for bio-based plastic production and use to preserve land and sea environmental quality in Europe

Autorzy: R. Ślęzak, L. Krzystek, E. Liwarska-Bizukojć
Opublikowane w: "IV National Scientific Conference ""Biopolymers - a source of new materials"" , 3. 09. 2020, Lublin, Poland, p. 38-39", 2020, ISBN 978-83-66261-66-2
Wydawca: N/A

Assessing Readiness of Greek municipalities to introduce bio-based materials in waste management streams

Autorzy: Jelena Barbir, Alexandros Lingos, Eleonora Foschi, Zaneta Stasiskiene, Constantina Skanavis, Walter Leal Filho
Opublikowane w: International Conference on Sustainable Solid Waste Management,, 2023
Wydawca: N/A

Entwicklung und Implementierung nachhaltiger Lösungen für die Herstellung und Nutzung biobasierter Kunststoffe

Autorzy: K Kuchta, ZK Chong
Opublikowane w: Bioabfall- und stoffspezifische Verwertung III, 2021, ISBN 3-928673-80-7
Wydawca: Tuhh

Are Biodegradable Plastics The Future For Agricultural Mulch Film Applications?

Autorzy: Eleonora Foschi, Genc Alimehmeti, Selena Aureli, Angelo Paletta
Opublikowane w: ALMADL, 2023, ISSN 2038-7954
Wydawca: Università di Bologna
DOI: 10.6092/unibo/amsacta/7385

Handbook on the impacts of bio-based and biodegradable plastics on existing waste management frameworks

Autorzy: Žaneta Stasiškienė, Lina Draudvilienė, Jūratė Petkevičienė, Kastytis Pamakštys, Zhi Kai Chong, Kerstin Kuchta, Viktoria Voronova, Anna Fråne, Daniel Menchaca Martínez, Jelena Barbir, Franz Stelzer, Tan Ru Shien, Elisabetta Bottazzoli, Lorena Affatato, Carly Fletcher, Alessandra Bonoli, Liliana Krzystek, Lars Gutow, Anita Emmerstorfer-Augustin, Paola Stagnaro, Laurent Belard, Mariana Din
Opublikowane w: 2022
Wydawca: N/A

Are Bio-Based Plastics The Future For Toy Applications?

Autorzy: Foschi, Eleonora ; Paletta, Angelo ; Mersico, Luigi ; Aureli, Selena ; Alimehmeti, Genc
Opublikowane w: ALMADL, 2023, ISSN 2038-7954
Wydawca: Università di Bologna
DOI: 10.6092/unibo/amsacta/7221

Moving from Conventional Plastics to Sustainable Solutions – Assessing Human Willingness to Change Current Practices

Autorzy: Barbir, J. et al.
Opublikowane w: Handbook of Sustainability Science in the Future, 2022
Wydawca: Springer, Cham.
DOI: 10.1007/978-3-030-68074-9_82-1

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników