Livrables
The deliverable of the Task 7.3 is the final report including the propositions for WG10, the description of simulation process to limit over-speed testing improvement of the method for validating a model against measurements
D20.1 Quality Plan and project ManualThe Quality Plan and project Manual provides the description of the quality management policy of the project describing the necessary procedures, for example guidelines or Gantt tables.
D2.4 Optimization tool for multi-functional design solutions reportOptimization tool for multi-functional design solutions report
D9.4 Virtual Validation & Certification Brakes: Executive Summary of SpecificationsThis deliverable provides summary of following specification developed in subtasks 9.3.1, 9.3.2 and 9.3.3 - Railway Vehicle Certification Process Specification focusing Brake Systems (including Virtual Validation & Certification)- Railway Vehicle Simulator Specification (allowing Virtual Validation & Certification)- Railway Vehicle Verification & Validation Specification (allowing to test a railway vehicle simulator against its specification)
D19.3 Dissemination and Exploitation Final activities reportThe final activities report compares the planned activities described in D19.2 with the activities made during the project and draws conclusions for future projects (lessons learnt).
D4.3 KPI assessment reportKPI assessment report
D17.4 Extract Final KPI Report of TD1.7General public description of the final concepts and the benefices compared to the original ambitions.
D8.3 Concrete applications descriptionThe deliverable of the Task 8.3 is the final report including the new propositions, taking into account return on experiment about what has been done in WP7.
D18.4 Fundamental work on HVACOverview on standardisation of interfacesApplicability of alternative refrigerantsRisk aspectsFirst estimation of KPI reference values and KPI-impact of CO2 HVAC unitsImprovement in the environmental footprint(Results of tasks 18.7 and 18.8)
D3.4 Assessment for the optimization tool reportAssessment for the optimization tool report comparing the conceptual designs derived from the optimization tool with a laboratory demonstrator.
D15.1 Specifications for Open Call S2R-OC-IP1-01-2019The members of WP15 will written a Design Brief to the Open Call to clarify expectations, deliverables and constraints and help the Open Call to start the work with any misunderstandings. This document will also define the data WP members could share with the Open Call and which data we need from the Open Call to continue our work.
D16.4 Extract Ecodesign analysis of conceptsExtract of the 16.1 which could be public
D9.5 Innovative Friction Pairing solutions - High level concept- Innovative Friction pairing feasibility study - Market needs and new materials investigation for dust reduction focus
D4.1 Certification procedures reportCertification procedures report for the new generation of carbody shells including new materials
D14.4 kpi reportDefinition of the kpi, definition, of the references to calculate the kpi and presentation of the results of the calculations or measures
D11.4 Detailed proposal on adhesion related standards changes- the proposals on adhesion-related standards changes discussed by the PIVOT2 task group will be summarized within this deliverable- where applicable, additional measurements will be made to support the proposals by analysed measurement data
D20.2 Final Recommendations report for future of S2RThe Final Recommendations report for future of S2R compares the planned activities of Pivot-2 with the activities made during the project and draws conclusions for future projects.
D19.2 Set up a dissemination and exploitation plan for the projectThe dissemination and exploitation plan provides the description of the planned activities of the project regarding dissemination and exploitation, i.e. preparing dissemination material, publishing papers in industry journals, exhibiting at trade fairs and participating in other events etc.)
D1.5 Optimization tool preliminary resultsOptimization tool preliminary results applied to railway carbodies.
Evaluation of the different Technical Demonstrators, the obtained results and the benefits achieved including conclusion and recommendations.
D3.1 Talgo DemonstratorPrototype demonstration in InnoTrans 2022 of Talgo Demonstrator
D17.2 Virtual prototypes for Innotrans 2022 - Interiors and CabinVirtual demonstrator to test the immersive configurator and build in real time a new layout and ambiance on board. The demonstrator will be done in Virtual Reality.
D3.3 Siemens DemonstratorSiemens Demonstrator for the test campaign
D3.2 Bombardier DemonstratorBombardier Demonstrator for the test campaign
D6.1 Technical Demonstrator of HMSThis deliverable will include a description of the different Technical Demonstrator, the obtained results and the benefits achieved by the different systems.
D17.1 Physical prototypes for Innotrans 2022 - InteriorsPhysical demonstrator in real size to test in real time the new interiors
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible