Objetivo
The international food safety community is demanding new technological advances in rapid and quantitative immunobiosensors. These devices will enable the implementation of on-site monitoring processes for the most relevant analytes (pathogens, allergens, etc) set by international standards on food safety at lower costs at affordable costs for the food industry, with the additional health and economic benefits for the society.
BIOLAN, a European SME leader in the field of biosensors for the food industry, aims to disrupt the market within the next years with the commercialization of rapid, low cost, disposable and quantitative one-step inmunobiosensors based on the Electrochemical Lateral Flow Immunoassay (ELFI) analytical technology.
In FOODSELFI, BIOLAN aims to overcome the current limitations of the LF technology for the development of a rapid quantitative immunobiosensors (lack of quantitative and reproducible results to allow mass manufacturing), through a new ELFI technology concept formulation: screen printed electrodes in the same paper material substrate of the Lateral Flow immunoassay. This simplified design could enable a mass-manufacturing process of quantitative immunosensors with increased sensitivity and reproducibility levels, by means of
In order to achieve this goal, BIOLAN ambitions to exploit its deep skills in two technologies critical for the development of mass-manufacturing process of quantitative biosensors, such electrochemical detection and electrode screen printing. However, BIOLAN lacks the knowledge on other critical skills such lateral flow inmunoassays and paper-based microfluidics.
Through the support of an SME Innovation Associate expert in the identified missing skills, working in close collaboration with a multidisciplinary team of biologist, chemist, and electronic engineers, BIOLAN will test the feasibility of FOODSELFI’s business idea and will define an innovation programme for its successful implementation.
Ámbito científico
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsmicrofluidics
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsbiosensors
- engineering and technologymechanical engineeringmanufacturing engineering
- engineering and technologyother engineering and technologiesfood technologyfood safety
Programa(s)
Convocatoria de propuestas
Consulte otros proyectos de esta convocatoriaConvocatoria de subcontratación
H2020-INNOSUP-02-2016
Régimen de financiación
CSA - Coordination and support actionCoordinador
48170 Zamudio
España
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.