Design for Resource and Energy efficiency in cerAMic kilns

Projektinformationen

DREAM

ID Finanzhilfevereinbarung: 723641

DOI 10.3030/723641

Projekt abgeschlossen

EK-Unterschriftsdatum 20 Juli 2016

Startdatum 1 Oktober 2016

Enddatum 30 September 2019

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Gesamtkosten € 5 076 105,00

EU-Beitrag € 5 076 105,00

Koordiniert durch

SACMI FORNI SPA
Italy

Leistungen

Documents, reports (3)

D3.1 Hot flue gas conditions report

Dcument on the chemical and thermal characterization of the hot flue gas including the particles loading

D1.1 SoA Analysis

Report containing a technology study on biofuel-fed CHP units

D4.1.1 Testing requirements

Document containing the specifications and standards regarding new materials testing

Websites, patent fillings, videos etc. (2)

D7.1.2 Project website

Creation of the webpage dedicated to the DREAM project

D7.1.3 Leaflets, posters, articles

Collection of the documentation produced during the project and employed to disseminate the impact of the various actions

Veröffentlichungen

Peer reviewed articles (2)

Numerical analysis of the exhaust gases recovery from a turbine CHP unit to improve the energy efficiency of a ceramic kiln

Autoren: L. Montorsi, M. Milani, M. Stefani, S. Terzi
Veröffentlicht in: Thermal Science and Engineering Progress, Ausgabe 5, 2018, Seite(n) 444-453, ISSN 2451-9049
Herausgeber: Elsevier
DOI: 10.1016/j.tsep.2018.01.013

CFD analysis of a full-scale ceramic kiln module under actual operating conditions

Autoren: Massimo Milani, Luca Montorsi, Matteo Stefani, Matteo Venturelli
Veröffentlicht in: E3S Web of Conferences, Ausgabe 22, 2017, Seite(n) 00117, ISSN 2267-1242
Herausgeber: Elsevier
DOI: 10.1051/e3sconf/20172200117

Conference proceedings (4)

Effects of a CHP turbine unit exhaust gases recovery on the energy efficiency of a ceramic kiln

Autoren: Montorsi, L.; Milani, M.; Stefani, M.; Terzi, S.
Veröffentlicht in: Ausgabe 1, 2018
Herausgeber: Elsevier

Acid emissions monitoring needs in ceramic tile industry: challenges derived from new policy trends

Autoren: Irina Celades, Salvador Gomar, Fernando Romero, Amisha Chauhan, Bertrand Delpech, and Hussam Jouhara
Veröffentlicht in: 2017
Herausgeber: E3S Web of Conferences 22, 00026 (2017) DOI: 10.1051/e3sconf/20172200026 ASEE17

A numerical approach for the energy efficiency analysis of an entire ceramic tunnel kiln

Autoren: Massimo Milani, Luca Montorsi, Matteo Venturelli, J.M. Tiscar, J. García-Ten
Veröffentlicht in: 2018
Herausgeber: SEEP 2018 11th INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY & ENVIRONMENTAL PROTECTION

Measuring The Effect Of Coatings On The Heat Transfer Through Refractory Linings In The Laboratory

Autoren: R. Simmat, C. Dannert, B. Bernard, V. Finke, L. Guaita
Veröffentlicht in: 2018
Herausgeber: Proceedings 61th International Colloquium on Refractories

Non-peer reviewed articles (2)

Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry

Autoren: Bertrand Delpech, Massimo Milani, Luca Montorsi, Davide Boscardin, Amisha Chauhan, Sulaiman Almahmoud, Hussam Jouhara
Veröffentlicht in: Journal Energy, Ausgabe 158, 2018, Seite(n) 656-665, ISSN 0360-5442
Herausgeber: Pergamon Press Ltd.

Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln

Autoren: Bertrand Delpech, Brian Axcell, Hussam Jouhara
Veröffentlicht in: Energy, Ausgabe 170, 2019, Seite(n) 636-651, ISSN 0360-5442
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2018.12.133