Design for Resource and Energy efficiency in cerAMic kilns

Información del proyecto

DREAM

Identificador del acuerdo de subvención: 723641

DOI 10.3030/723641

Proyecto cerrado

Fecha de la firma de la CE 20 Julio 2016

Fecha de inicio 1 Octubre 2016

Fecha de finalización 30 Septiembre 2019

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Coste total € 5 076 105,00

Aportación de la UE € 5 076 105,00

Coordinado por

SACMI FORNI SPA
Italy

Resultado final

Documents, reports (3)

D3.1 Hot flue gas conditions report

Dcument on the chemical and thermal characterization of the hot flue gas including the particles loading

D1.1 SoA Analysis

Report containing a technology study on biofuel-fed CHP units

D4.1.1 Testing requirements

Document containing the specifications and standards regarding new materials testing

Websites, patent fillings, videos etc. (2)

D7.1.2 Project website

Creation of the webpage dedicated to the DREAM project

D7.1.3 Leaflets, posters, articles

Collection of the documentation produced during the project and employed to disseminate the impact of the various actions

Publicaciones

Peer reviewed articles (2)

Numerical analysis of the exhaust gases recovery from a turbine CHP unit to improve the energy efficiency of a ceramic kiln

Autores: L. Montorsi, M. Milani, M. Stefani, S. Terzi
Publicado en: Thermal Science and Engineering Progress, Edición 5, 2018, Página(s) 444-453, ISSN 2451-9049
Editor: Elsevier
DOI: 10.1016/j.tsep.2018.01.013

CFD analysis of a full-scale ceramic kiln module under actual operating conditions

Autores: Massimo Milani, Luca Montorsi, Matteo Stefani, Matteo Venturelli
Publicado en: E3S Web of Conferences, Edición 22, 2017, Página(s) 00117, ISSN 2267-1242
Editor: Elsevier
DOI: 10.1051/e3sconf/20172200117

Conference proceedings (4)

Effects of a CHP turbine unit exhaust gases recovery on the energy efficiency of a ceramic kiln

Autores: Montorsi, L.; Milani, M.; Stefani, M.; Terzi, S.
Publicado en: Edición 1, 2018
Editor: Elsevier

Acid emissions monitoring needs in ceramic tile industry: challenges derived from new policy trends

Autores: Irina Celades, Salvador Gomar, Fernando Romero, Amisha Chauhan, Bertrand Delpech, and Hussam Jouhara
Publicado en: 2017
Editor: E3S Web of Conferences 22, 00026 (2017) DOI: 10.1051/e3sconf/20172200026 ASEE17

A numerical approach for the energy efficiency analysis of an entire ceramic tunnel kiln

Autores: Massimo Milani, Luca Montorsi, Matteo Venturelli, J.M. Tiscar, J. García-Ten
Publicado en: 2018
Editor: SEEP 2018 11th INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY & ENVIRONMENTAL PROTECTION

Measuring The Effect Of Coatings On The Heat Transfer Through Refractory Linings In The Laboratory

Autores: R. Simmat, C. Dannert, B. Bernard, V. Finke, L. Guaita
Publicado en: 2018
Editor: Proceedings 61th International Colloquium on Refractories

Non-peer reviewed articles (2)

Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry

Autores: Bertrand Delpech, Massimo Milani, Luca Montorsi, Davide Boscardin, Amisha Chauhan, Sulaiman Almahmoud, Hussam Jouhara
Publicado en: Journal Energy, Edición 158, 2018, Página(s) 656-665, ISSN 0360-5442
Editor: Pergamon Press Ltd.

Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln

Autores: Bertrand Delpech, Brian Axcell, Hussam Jouhara
Publicado en: Energy, Edición 170, 2019, Página(s) 636-651, ISSN 0360-5442
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2018.12.133