Obiettivo
The main goal of this project is the development of an industrial “plug & play” system for additive layer manufacturing which is based on a blown powder process using Plasma Transferred Arc (PTA) Technology. The developed 4M System will offer:
a) Simple equipment concept based on well established PTA technology for hard facing coatings
b) Possibility to realize Multi-Material concepts
c) Suitability of the technology to be used for a wide range of raw materials
d) High deposition/building rates
e) Possibility to realize large size components (up to 1,5 m x 1,5 m in the first version)
Within the project the system will be developed to be used for wo different materials (Al and Ti-alloys) and to demonstrate one multi-material concept. The developed process will be used to realize three different demonstrators (case studies) and to perform testing of the manufactured prototypes under space relevant testing conditions.
Campo scientifico
- engineering and technologymaterials engineeringcomposites
- natural scienceschemical sciencesinorganic chemistrytransition metals
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Programma(i)
Argomento(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-SMEINST-2-2014
Meccanismo di finanziamento
SME-2 - SME instrument phase 2Coordinatore
2444 Seibersdorf An Der Leitha
Austria
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.