Periodic Reporting for period 2 - 4M (Development of a Machine for Multi-Material Manufacturing)
Periodo di rendicontazione: 2016-07-01 al 2017-06-30
The 4M system (Machine for Multi-Material Manufacturing) will offer:
a) Simple equipment concept based on well established PTA technology for hard facing coatings
b) A Technology which allows to realize Multi-Material concepts
c) Suitability of the technology to be used for a wide range of raw materials
d) High deposition/building rates
e) Possibility to realize large size components
After the setup of the system, the process technology is now under development. It was possible to manufacture Titanium alloys with properties compared to state of the art materials. Additional materials such as Aluminium alloys and tests for manufacturing of parts made from a composite materials have been performed.
Besides the investigation of processing parameters for the different materials and upgrading of the system (including of oxygen level sensor/monitoring) a test plan was established for both, material testing at sample level but also testing of the demonstrators. 3 different demonstrators have been identified and different designs have been assessed.
In addition to that a website was established (www.think-additive.com) and the activities have been presented at different workshops and fairs including the Hannover fair.
b) We had meetings at the Hannover FAir with large industrial companies
c) The availability of the prototype system allows us to attract the interest of one of the Large System Integrators
d) With the developed technology we were able to respond to an open tender of ESA on large titanium parts