Obiettivo
The main goal of this project is the development of an industrial “plug & play” system for additive layer manufacturing which is based on a blown powder process using Plasma Transferred Arc (PTA) Technology. The developed 4M System will offer:
a) Simple equipment concept based on well established PTA technology for hard facing coatings
b) Possibility to realize Multi-Material concepts
c) Suitability of the technology to be used for a wide range of raw materials
d) High deposition/building rates
e) Possibility to realize large size components (up to 1,5 m x 1,5 m in the first version)
Within the project the system will be developed to be used for wo different materials (Al and Ti-alloys) and to demonstrate one multi-material concept. The developed process will be used to realize three different demonstrators (case studies) and to perform testing of the manufactured prototypes under space relevant testing conditions.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
- ingegneria e tecnologiaingegneria dei materialicompositi
- scienze naturaliscienze chimichechimica inorganicametalli di transizione
- ingegneria e tecnologiaingegneria dei materialirivestimenti e pellicole
- ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasensori
- ingegneria e tecnologiaingegneria meccanicaingegnerizzazione dei prodottiproduzione additiva
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Argomento(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-SMEINST-2-2014
Meccanismo di finanziamento
SME-2 - SME instrument phase 2Coordinatore
2444 Seibersdorf An Der Leitha
Austria
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.