CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
Synthesis report on task 2.4 about the mechanical resistance of ablated wall under high heat flux
Methodology - SynthesisSynthesis report about the updated methodology for demonstration of In-Vessel melt retention
Final report on simulant stratified poolInterim report on heat transfer within stratified molten pool with simulant materials, performed at KTH (POMECO facility)
3rd periodic reportSummary of activities and main results obtained during the third year of the project
Review of baffling of the vesselFinal report on baffling of the vessel (design, efficiency, optimization)
Final report on critical scenariosFinal report on task 5.1 – Options to reduce the probability of critical scenarios
Final project reportSummary of activities and main results obtained during the whole project
2nd periodic reportSummary of activities and main results obtained during the second year of the project
Final report on top coolingFinal report on direct cooling of the top metal layer performed in KTH facility
Review of alternative innovationsSynthesis report on benefits of several innovations to improve IVMR success
Final report on melt propertiesFinal report on melt properties measurements performed in CEA facilities
Influence of oxidation and fluid properties on boiling and CHF: Results of the CNU-M1 and ANUBIS testsReport on CERES tests
Final report on complementary experiments on the CERES facilities (MTA-EK)
Report on the use of CFDSynthesis report on task 2.3 about the use of CFD for simulation of stratified molten pool or external cooling.
Minutes of the kick-off meetingSummary of initial discussions and presentations about the objectives of the project and the contributions of participants.
Report on modellingSynthesis report on task 2.2 about modelling and improvement of codes
Synthesis report on spray coolingSynthesis report on RPV spray cooling for IVMR and recommendations for system design.
Final report on oxide conductivityFinal report on measurements of heat conductivity of the solid oxide phase performed in ITU facility
Synthesis report on corium pool behaviourFinal report on physicochemical phenomena in corium debris and molten pool
Final report on innovationsPreliminary report on spray cooling
State-of-the-art review of spray cooling and heat transfer models and feasibility study report
Review of instrumentation for SAMGFinal report on instrumention to monitor the IVMR management
First periodic reportSummary of activities and main results obtained during the first year of the project
Communication action PlanCommunication action Plan (CAP)
Review of spray coolingFinal report on spray cooling (existing options, design, efficiency)
Final report on core refloodFinal report on the effect of core re-flood
Results of the PIRT on phenomena relevant for IVR modellingDescription of the method to establish the rankings and conclusions of the ranking
Final report on full scale testsFinal report on full scale geometry tests (2D slice) performed at UJV
Report on experimental study of spray coolingSynthesis report on experimental study of CHF and post dry heat transfer with spray water cooling of downward inclined vessel steel surface (performed at KTH)
Review of vessel coatingFinal report on the efficiency of various vessel coatings
Final report on core debris coolabilityFinal report on the effect of partially melted debris re-flood performed in PEAL and PRELUDE facilities (IRSN)
Final report on the large scale cold-crucible experimentFinal report on the measurements of heat flux between the vessel wall and the stratified molten pool performed in the large scale cold-crucible experiment at CVR
Final report on small scale testsFinal report of small scale experimental results performed at UJV
Review of active passive/injection systemsFinal report on the review of active/passive in-vessel injection systems
Creation of IVMR website
Publications
Auteurs:
F. Fichot, L. Carénini, M. Sangiorgi, S. Hermsmeyer, A. Miassoedov, S. Bechta, J. Zdarek, D. Guenadou
Publié dans:
Annals of Nuclear Energy, Numéro 119, 2018, Page(s) 36-45, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.040
Auteurs:
R. Gencheva, A. Stefanova, P. Groudev
Publié dans:
Annals of Nuclear Energy, Numéro 81, 2015, Page(s) 207-212, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2015.02.039
Auteurs:
L. Carénini, F. Fichot, N. Seignour
Publié dans:
Annals of Nuclear Energy, Numéro 118, 2018, Page(s) 363-374, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.04.032
Auteurs:
R. Gencheva, A. Stefanova, P. Groudev, B. Chatterjee, D. Mukhopadhyay
Publié dans:
Nuclear Engineering and Design, Numéro 298, 2016, Page(s) 208-217, ISSN 0029-5493
Éditeur:
Elsevier BV
DOI:
10.1016/j.nucengdes.2015.12.031
Auteurs:
Didier Jacquemain, Didier Vola, Renaud Meignen, Jean-Michel Bonnet, Florian Fichot, Emmanuel Raimond, Marc Barrachin
Publié dans:
Nuclear Technology, Numéro 196/2, 2016, Page(s) 161-174, ISSN 0029-5450
Éditeur:
American Nuclear Society
DOI:
10.13182/NT16-13
Auteurs:
Peter Matejovic, Miroslav Barnak, Milan Bachraty, Lubomir Vranka, Robert Berky
Publié dans:
Nuclear Engineering and Design, Numéro 314, 2017, Page(s) 93-109, ISSN 0029-5493
Éditeur:
Elsevier BV
DOI:
10.1016/j.nucengdes.2017.01.015
Auteurs:
Afaque Shams
Publié dans:
Annals of Nuclear Energy, Numéro 117, 2018, Page(s) 234-246, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.031
Auteurs:
Mindaugas Valinčius, Tadas Kaliatka, Algirdas Kaliatka, Eugenijus Ušpuras
Publié dans:
Science and Technology of Nuclear Installations, Numéro 2018, 2018, Page(s) 1-14, ISSN 1687-6075
Éditeur:
Hindawi Publishing Corporation
DOI:
10.1155/2018/7162387
Auteurs:
Alice Seibert, Dragos Staicu, David Bottomley, Marco Cologna, Jacobus Boshoven, Herwin Hein, Emthetal Kassim, Sarah Nourry, Markus Ernstberger, Davide Robba, Rudy Konings
Publié dans:
Journal of Nuclear Materials, Numéro 520, 2019, Page(s) 165-177, ISSN 0022-3115
Éditeur:
Elsevier BV
DOI:
10.1016/j.jnucmat.2019.04.019
Auteurs:
Adrien Pivano, Pascal Piluso, Nourdine Chikhi, Jules Delacroix, Pascal Fouquart, Romain Le Tellier
Publié dans:
Nuclear Engineering and Design, Numéro 355, 2019, Page(s) 110271, ISSN 0029-5493
Éditeur:
Elsevier BV
DOI:
10.1016/j.nucengdes.2019.110271
Auteurs:
N. Chikhi, P. Fouquart, J. Delacroix, P. Piluso
Publié dans:
Nuclear Technology, Numéro 205/1-2, 2018, Page(s) 200-212, ISSN 0029-5450
Éditeur:
American Nuclear Society
DOI:
10.1080/00295450.2018.1486160
Auteurs:
L. Carénini, F. Fichot, N. Bakouta, A. Filippov, R. Le Tellier, L. Viot, I. Melnikov, P. Pandazis
Publié dans:
Annals of Nuclear Energy, Numéro 146, 2020, Page(s) 107612, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107612
Auteurs:
Xiaoyang Gaus-Liu, Thomas Cron, Beatrix Fluhrer
Publié dans:
Nuclear Technology, 2020, Page(s) 1-12, ISSN 0029-5450
Éditeur:
American Nuclear Society
DOI:
10.1080/00295450.2020.1743102
Auteurs:
F. Fichot, L. Carénini, N. Bakouta, H. Esmaili, L. Humphries, T. Laato, R. Le Tellier, L. Saas, I. Melnikov, P. Pandazis, S. Weber, R.J. Park, A. Filippov, V. Strizhov
Publié dans:
Annals of Nuclear Energy, Numéro 146, 2020, Page(s) 107617, ISSN 0306-4549
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107617
Auteurs:
Shambhavi Nandan, Florian Fichot, Bruno Piar
Publié dans:
Nuclear Engineering and Design, Numéro 364, 2020, Page(s) 110608, ISSN 0029-5493
Éditeur:
Elsevier BV
DOI:
10.1016/j.nucengdes.2020.110608
Auteurs:
L. Carénini, F. Fichot
Publié dans:
Volume 4: Computational Fluid Dynamics (CFD) and Coupled Codes; Decontamination and Decommissioning, Radiation Protection, Shielding, and Waste Management; Workforce Development, Nuclear Education and Public Acceptance; Mitigation Strategies for Beyond Design Basis Events; Risk Management, 2016, Page(s) V004T13A009, ISBN 978-0-7918-5004-6
Éditeur:
ASME
DOI:
10.1115/ICONE24-60598
Auteurs:
F. Fichot, L. Carénini, W. Villanueva, S. Bechta
Publié dans:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Page(s) V007T11A014, ISBN 978-0-7918-5151-7
Éditeur:
ASME
DOI:
10.1115/icone26-82248
Auteurs:
D. B. Lopukh, I. N. Skrigan, A. V. Vavilov, A. P. Martynov, S. V. Bechta, A. A. Komlev
Publié dans:
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), 2018, Page(s) 1-6, ISBN 978-1-5386-9535-7
Éditeur:
IEEE
DOI:
10.1109/fareastcon.2018.8602779
Auteurs:
L. Carénini, F. Fichot
Publié dans:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Page(s) V007T11A013, ISBN 978-0-7918-5151-7
Éditeur:
ASME
DOI:
10.1115/icone26-82243
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible