CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Synthesis report on task 2.4 about the mechanical resistance of ablated wall under high heat flux
Methodology - SynthesisSynthesis report about the updated methodology for demonstration of In-Vessel melt retention
Final report on simulant stratified poolInterim report on heat transfer within stratified molten pool with simulant materials, performed at KTH (POMECO facility)
3rd periodic reportSummary of activities and main results obtained during the third year of the project
Review of baffling of the vesselFinal report on baffling of the vessel (design, efficiency, optimization)
Final report on critical scenariosFinal report on task 5.1 – Options to reduce the probability of critical scenarios
Final project reportSummary of activities and main results obtained during the whole project
2nd periodic reportSummary of activities and main results obtained during the second year of the project
Final report on top coolingFinal report on direct cooling of the top metal layer performed in KTH facility
Review of alternative innovationsSynthesis report on benefits of several innovations to improve IVMR success
Final report on melt propertiesFinal report on melt properties measurements performed in CEA facilities
Influence of oxidation and fluid properties on boiling and CHF: Results of the CNU-M1 and ANUBIS testsReport on CERES tests
Final report on complementary experiments on the CERES facilities (MTA-EK)
Report on the use of CFDSynthesis report on task 2.3 about the use of CFD for simulation of stratified molten pool or external cooling.
Minutes of the kick-off meetingSummary of initial discussions and presentations about the objectives of the project and the contributions of participants.
Report on modellingSynthesis report on task 2.2 about modelling and improvement of codes
Synthesis report on spray coolingSynthesis report on RPV spray cooling for IVMR and recommendations for system design.
Final report on oxide conductivityFinal report on measurements of heat conductivity of the solid oxide phase performed in ITU facility
Synthesis report on corium pool behaviourFinal report on physicochemical phenomena in corium debris and molten pool
Final report on innovationsPreliminary report on spray cooling
State-of-the-art review of spray cooling and heat transfer models and feasibility study report
Review of instrumentation for SAMGFinal report on instrumention to monitor the IVMR management
First periodic reportSummary of activities and main results obtained during the first year of the project
Communication action PlanCommunication action Plan (CAP)
Review of spray coolingFinal report on spray cooling (existing options, design, efficiency)
Final report on core refloodFinal report on the effect of core re-flood
Results of the PIRT on phenomena relevant for IVR modellingDescription of the method to establish the rankings and conclusions of the ranking
Final report on full scale testsFinal report on full scale geometry tests (2D slice) performed at UJV
Report on experimental study of spray coolingSynthesis report on experimental study of CHF and post dry heat transfer with spray water cooling of downward inclined vessel steel surface (performed at KTH)
Review of vessel coatingFinal report on the efficiency of various vessel coatings
Final report on core debris coolabilityFinal report on the effect of partially melted debris re-flood performed in PEAL and PRELUDE facilities (IRSN)
Final report on the large scale cold-crucible experimentFinal report on the measurements of heat flux between the vessel wall and the stratified molten pool performed in the large scale cold-crucible experiment at CVR
Final report on small scale testsFinal report of small scale experimental results performed at UJV
Review of active passive/injection systemsFinal report on the review of active/passive in-vessel injection systems
Creation of IVMR website
Publicaciones
Autores:
F. Fichot, L. Carénini, M. Sangiorgi, S. Hermsmeyer, A. Miassoedov, S. Bechta, J. Zdarek, D. Guenadou
Publicado en:
Annals of Nuclear Energy, Edición 119, 2018, Página(s) 36-45, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.040
Autores:
R. Gencheva, A. Stefanova, P. Groudev
Publicado en:
Annals of Nuclear Energy, Edición 81, 2015, Página(s) 207-212, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2015.02.039
Autores:
L. Carénini, F. Fichot, N. Seignour
Publicado en:
Annals of Nuclear Energy, Edición 118, 2018, Página(s) 363-374, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.04.032
Autores:
R. Gencheva, A. Stefanova, P. Groudev, B. Chatterjee, D. Mukhopadhyay
Publicado en:
Nuclear Engineering and Design, Edición 298, 2016, Página(s) 208-217, ISSN 0029-5493
Editor:
Elsevier BV
DOI:
10.1016/j.nucengdes.2015.12.031
Autores:
Didier Jacquemain, Didier Vola, Renaud Meignen, Jean-Michel Bonnet, Florian Fichot, Emmanuel Raimond, Marc Barrachin
Publicado en:
Nuclear Technology, Edición 196/2, 2016, Página(s) 161-174, ISSN 0029-5450
Editor:
American Nuclear Society
DOI:
10.13182/NT16-13
Autores:
Peter Matejovic, Miroslav Barnak, Milan Bachraty, Lubomir Vranka, Robert Berky
Publicado en:
Nuclear Engineering and Design, Edición 314, 2017, Página(s) 93-109, ISSN 0029-5493
Editor:
Elsevier BV
DOI:
10.1016/j.nucengdes.2017.01.015
Autores:
Afaque Shams
Publicado en:
Annals of Nuclear Energy, Edición 117, 2018, Página(s) 234-246, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.031
Autores:
Mindaugas Valinčius, Tadas Kaliatka, Algirdas Kaliatka, Eugenijus Ušpuras
Publicado en:
Science and Technology of Nuclear Installations, Edición 2018, 2018, Página(s) 1-14, ISSN 1687-6075
Editor:
Hindawi Publishing Corporation
DOI:
10.1155/2018/7162387
Autores:
Alice Seibert, Dragos Staicu, David Bottomley, Marco Cologna, Jacobus Boshoven, Herwin Hein, Emthetal Kassim, Sarah Nourry, Markus Ernstberger, Davide Robba, Rudy Konings
Publicado en:
Journal of Nuclear Materials, Edición 520, 2019, Página(s) 165-177, ISSN 0022-3115
Editor:
Elsevier BV
DOI:
10.1016/j.jnucmat.2019.04.019
Autores:
Adrien Pivano, Pascal Piluso, Nourdine Chikhi, Jules Delacroix, Pascal Fouquart, Romain Le Tellier
Publicado en:
Nuclear Engineering and Design, Edición 355, 2019, Página(s) 110271, ISSN 0029-5493
Editor:
Elsevier BV
DOI:
10.1016/j.nucengdes.2019.110271
Autores:
N. Chikhi, P. Fouquart, J. Delacroix, P. Piluso
Publicado en:
Nuclear Technology, Edición 205/1-2, 2018, Página(s) 200-212, ISSN 0029-5450
Editor:
American Nuclear Society
DOI:
10.1080/00295450.2018.1486160
Autores:
L. Carénini, F. Fichot, N. Bakouta, A. Filippov, R. Le Tellier, L. Viot, I. Melnikov, P. Pandazis
Publicado en:
Annals of Nuclear Energy, Edición 146, 2020, Página(s) 107612, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107612
Autores:
Xiaoyang Gaus-Liu, Thomas Cron, Beatrix Fluhrer
Publicado en:
Nuclear Technology, 2020, Página(s) 1-12, ISSN 0029-5450
Editor:
American Nuclear Society
DOI:
10.1080/00295450.2020.1743102
Autores:
F. Fichot, L. Carénini, N. Bakouta, H. Esmaili, L. Humphries, T. Laato, R. Le Tellier, L. Saas, I. Melnikov, P. Pandazis, S. Weber, R.J. Park, A. Filippov, V. Strizhov
Publicado en:
Annals of Nuclear Energy, Edición 146, 2020, Página(s) 107617, ISSN 0306-4549
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107617
Autores:
Shambhavi Nandan, Florian Fichot, Bruno Piar
Publicado en:
Nuclear Engineering and Design, Edición 364, 2020, Página(s) 110608, ISSN 0029-5493
Editor:
Elsevier BV
DOI:
10.1016/j.nucengdes.2020.110608
Autores:
L. Carénini, F. Fichot
Publicado en:
Volume 4: Computational Fluid Dynamics (CFD) and Coupled Codes; Decontamination and Decommissioning, Radiation Protection, Shielding, and Waste Management; Workforce Development, Nuclear Education and Public Acceptance; Mitigation Strategies for Beyond Design Basis Events; Risk Management, 2016, Página(s) V004T13A009, ISBN 978-0-7918-5004-6
Editor:
ASME
DOI:
10.1115/ICONE24-60598
Autores:
F. Fichot, L. Carénini, W. Villanueva, S. Bechta
Publicado en:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Página(s) V007T11A014, ISBN 978-0-7918-5151-7
Editor:
ASME
DOI:
10.1115/icone26-82248
Autores:
D. B. Lopukh, I. N. Skrigan, A. V. Vavilov, A. P. Martynov, S. V. Bechta, A. A. Komlev
Publicado en:
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), 2018, Página(s) 1-6, ISBN 978-1-5386-9535-7
Editor:
IEEE
DOI:
10.1109/fareastcon.2018.8602779
Autores:
L. Carénini, F. Fichot
Publicado en:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Página(s) V007T11A013, ISBN 978-0-7918-5151-7
Editor:
ASME
DOI:
10.1115/icone26-82243
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles