The supercritical CO2 Heat Removal System

Resultado final

Reporting templates and communication guidance

The reports summarises all templates for reporting, deliverables and communication activities and explains how reports and deliverables have to be produced

BWR simulations of decay heat management

After finishing the preparation of the BWR simulator several operational and transient simulations with respect to the ATHLET-calculations done by Venker will be carried out.

Mechanical/thermal stresses

Documentation of the thermal and mechanical stresses for the parts of the turbo-machine (rotating parts and casing).

Data of simple CO2 experiment for code validation

Delivery of experimental data of different test configurations of the compact heat exchanger will be provided to validate the CFD code for high and low temperature applications.

Report of articles published in scientific and technical journals and presentations given at conferences

The reports lists all publications made during the lifetime of the project including their abstracts.

Release design requirements (connections, flanges, installation of components)

In collaboration with WP1 a specification of all necessary glass model modifications will be written. The specification will describe the mechanical and control system changes. A safety concept, safety valve and CO2 Alarm is required

Release thermodynamic cycle parameter

List of all necessary data of the glass model, like steam temperature, pressure, flow, and the transferred power.

Release documentation of preparation glass model

With collaboration of WP1 a specification of the necessary glass model modifications will be written. The specification will describe the mechanical and control system changes to invite offers for both manufacturing of components and installation.

Dissemination, communication and exploitation plan (annually updated), including updates of activities undertaken in Task 5.2 to 5.6

The report will be the guidance for the partners regarding the protection and exploitation of results, the procedures and objectives of a targeted dissemination as well for the communication towards the wider public. The report will sum up the background of the project and provide a disclosure procedure for the evaluation of the patentability of IPRs. The report will updates once per year with information regarding the published articles (T5.2), glass model visits and training courses (T5.3), the IPRs (T5.4), the use of the project’s web site (T5.5) and promotions (T5.6)

Start-up system hardware

Describing the start-up system of the cycle and manufacturing drawings. In case the hardware is an integral part of the turbomachinery the delivery contains sketches only.

Release test program glass model

Test program for the glass model shall include all scenarios with loss of internal power of reactor model. The test program will be based on safety analyses performed in WP 1, according to deliverable D3-1.3.

Sink heat exchanger hardware shipping to GfS and delivery of validated performance maps

Basic experiments and verification of operation of heat exchanger will be performed. Based on experimental results performance maps will be created. Then the heat exchanger will be shipped to GfS.

Sink heat exchanger hardware

Specification of operating conditions will be presented in detail. Technical requirements of the heat sink exchanger will be determined by preliminary calculations. Consequently, the heat exchanger will be purchased (if affordable on the market) or manufactured, based on the technical assessment.

Compact heat exchanger hardware to be attached to the glass model at GfS

Delivery of the compact heat exchanger hardware to be installed into the glass model at Gfs.

Kick-off meeting

UDE will organise and prepare the project’s kick-off meeting. It will allow all partners (scientific, management and administrative/financial staff) meeting together and clarifying actual procedures within the research activities.

Final conference

At the Final Conference, ReGround will present its achievements to both the public and the interested scientific community.

Shipping of turbo-machine set to CV Rez

The hardware of the turbo-machine set including the start-up system shall be shipped to CV Rez. The hardware does not include the connecting piping between the start-up system neither the integration piping into the CV Rez system.

Shipping of turbo-machine set to GfS

Turbo-machine set will be tested and a basic measurement to obtain the necessary experimental data will be performed. Then the facility will be shipped to GfS.

Visits at the glass model accompanied by specific training module

Training scenarios will describe the behaviour of the glass model with implementation of the sCO2-HeRo during appropriate transients. These training scenarios will be incorporated into an overall training program as a part of complementary element to safety/security seminars dedicated to students and PhD candidates.

Public website

The public web site covers the communication of progress and results, of events and news from the project towards the wider public

Publicaciones

Supercritical CO2 Heat Removal System - Integration into European PWR Fleet

Autores: P. Hájek, A. Vojacek, V. Hakl
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 79-85
Editor: DuEPublico
DOI: 10.17185/duepublico/46083

Raising nuclear reactor safety to a higher level – the supercritical CO2 heat removal system – sCO2-HeRo

Autores: J. Starflinger, D. Brillert, O. Frybort, P. Hajek, A. Hennink, T. Freutel
Publicado en: Proceedings of the 26th International Conference Nuclear Energy for New Europe NENE, 2017
Editor: International Conference Nuclear Energy for New Europe NENE

Design of a compact heat exchanger and heat transfer investigations of a scalded down sCO2-HeRo system

Autores: M. Straetz, R. Mertz, J. Starflinger
Publicado en: Proceedings of International Congress on Advances in Nuclear Power Plants – ICAPP 2018, 2018
Editor: Proceedings of International Congress on Advances in Nuclear Power Plants – ICAPP 2018

Challenges in Supercritical CO2 power cycle technology and First operational experience at CVR

Autores: A. Vojacek, A. Hacks, T. Melichar, O. Frybort, P. Hajek
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 8-22
Editor: DuEPublico
DOI: 10.17185/duepublico/46075

Experimental investigation of the sCO2-HeRo compressor

Autores: A. Hacks, A. Vojacek, D. Brillert
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 50-59
Editor: DuEPublico
DOI: 10.17185/duepublico/46088

Scaling Considerations for the Application of the sCO2-HeRo System in Nuclear Power Plants

Autores: A. Hacks, D. Brillert
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 60-68
Editor: DuEPublico
DOI: 10.17185/duepublico/46089

Experimental investigation on the heat transfer between condensing steam and sCO2 in a compact heat exchanger

Autores: M. Straetz, R. Mertz, J. Starflinger
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 135-144
Editor: DuEPublico
DOI: 10.17185/duepublico/46078

Design, control procedure and start-up of the sCO2 test facility SCARLETT

Autores: W. Flaig, R. Mertz, J. Starflinger
Publicado en: Proceedings of the 2nd European supercritical CO2 Conference, 2018, Página(s) 32-41
Editor: DuEPublico
DOI: 10.17185/duepublico/46081

A supercritical CO2 low temperature Brayton-cycle for residual heat removal

Autores: Benra, F.-K., Brillert, D., Frybort, O., Hajek, P., Rohde, M., Schuster, S., Seewald, M., Starflinger, J.
Publicado en: Proceedings of the 5th International Symposium - Supercritical CO2 Power Cycles March 28-31, 2016, San Antonio, Texas, 2016, Página(s) 1-12
Editor: The 5th International Symposium - Supercritical CO2 Power Cycles March 28- 31, 2016, San Antonio, Texas

Small scale sCO2 compressor impeller design considering real fluid conditions

Autores: Schuster, S., Benra, F.-K., Brillert, D.
Publicado en: Proceedings of the 5th International Symposium - Supercritical CO2 Power Cycles March 28-31, 2016, San Antonio, Texas, 2016, Página(s) 1-10
Editor: The 5th International Symposium - Supercritical CO2 Power Cycles March 28- 31, 2016, San Antonio, Texas

Introduction of an Integrated Turbo-Electrical Machine

Autores: Sebastian Schuster, Christian Kreischer, Dieter Brillert
Publicado en: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines, 2017, Página(s) V008T26A008, ISBN 978-0-7918-5095-4
Editor: ASME Digital Collection
DOI: 10.1115/GT2017-63526

Setup of the Supercritical CO 2 Test Facility “SCARLETT” for Basic Experimental Investigations of a Compact Heat Exchanger for an Innovative Decay Heat Removal System

Autores: Wolfgang Flaig, Rainer Mertz, Joerg Starflinger
Publicado en: Journal of Nuclear Engineering and Radiation Science, Edición 4/3, 2018, Página(s) 031004, ISSN 2332-8983
Editor: ASME Digital Collection
DOI: 10.1115/1.4039595

TURBOMACHINE DESIGN FOR SUPERCRITICAL CARBON DIOXIDE WITHIN THE SCO2-HERO.EU PROJECT

Autores: Alexander J. Hacks, Sebastian Schuster, Hans Josef Dohmen, Friedrich-Karl Benra, Dieter Brillert
Publicado en: Journal of Engineering for Gas Turbines and Power, 2018, ISSN 0742-4795
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4040861

Cycle Calculations of a Small-Scale Heat Removal System with Supercritical CO2 as Working Fluid

Autores: Marcel Straetz, Joerg Starflinger, Rainer Mertz, Dieter Brillert
Publicado en: Journal of Nuclear Engineering and Radiation Science, 2018, ISSN 2332-8983
Editor: ASME Digital Collection
DOI: 10.1115/1.4039884

Performance test of the air cooled finned-tube supercritical CO2 sink heat exchanger

Autores: Ales Vojacek, Vaclav Dostal, Tomas Melichar, Martin Rohde, Friedrich Gottelt
Publicado en: Journal of Thermal Science and Engineering Applications, 2018, ISSN 1948-5085
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4041686

Derechos de propiedad intelectual

Strömungsmaschine und deren Verwendung

Número de solicitud/publicación: DE10 2016 115 744
Fecha: 2016-08-24

sCO2-HeRo Logo

Número de solicitud/publicación: DE30 2016 100 806
Fecha: 2016-01-29

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Derechos de propiedad intelectual

Compartir esta página

Descargar