Livrables
Executive summary of analysis of the current homologation process and of the technical requirements
Specification of desired capability of separation methods and track quality"Indicates the precision required of a separation method for use in standardization, constraints on costs and scope of application (type of products, tracks, environments, etc). Includes results of a feasibility study into the introduction of ""recommended values"" in addition to limit values. "
Attractiveness and Comfort Review ReportCompilation of reports from various bodies on Attractiveness and Comfort
Evaluation methodology descriptionReport describing the methodology to use for the evaluation of the impact
State of the Art of Cost Assessment MethodologiesIt reviews all the literature and substantive findings from previous research projects in Running Gear. Describes current technical as well as business models. Specifies architecture of the model, while taking into account the gaps and considering generalised country specific financing as well as technical aspects.
Set-up public websiteThis is for the set up, and going live, of a public website for the project. This will be continually updated with news and results throughout the life of the project.
Report on Communication and Dissemination activitiesThis report will detail the activities undertaken during the life of the project.
Final ReportDocument defining all the open and closed points, aspects, conditions, interfaces and conclusions needed to start with sufficient information the SHIFT2RAIL project.
Validation against Bogie TypesSelects a representative running gear and performs sensitivity analysis
Architecture and Interface Definition for the Train to Ground CommunicationThis deliverable is intended to provide inputs for the IEC 61375-2-6 to close open points in the train to ground communication standard currently under development.
Assessment and validation of source separation methodsThe various separation methods will be validated using the measurement data. Their potential accuracy and cost will be evaluated with reference to the specifications from Task 7.1. Recommendations for further development will be made (led by ISVR and BT).
Acoustic noise performances, targets, simulation methods, validation and recommendationsCompilation of current traction components noise performances, proposal of noise targets for traction components, state of the art of methodologies for the simulation of electromagnetic noise and cooling in traction systems, method used for simulation for each traction component, Simulation results validation with experimental data in every studied traction component. Strength and weakness of the methods including best practices and recommendations of use of the methods to be explored in SHIFT2RAIL
Characterisation of the Railway Environment for Radio TransmissionDocument that defines a methodology for characterising the railway environment and provides the corresponding simulation models.
State of the Art and Recommendation of Suitable TechnologiesReport on relevant radio technologies for TCMS from other fields including incipient or under development ones. This review will include information of existing, promising or under development technologies and architectures from other fields (e.g. aeronautics, industrial, telecommunications or signalling). The report will include an overview on hardware, protocols, frequencies, performance, simulators and tools, official institutions and bodies, standards and other research projects (c.f. Table 2 Part B - Projects linked with ROLL2RAIL)
Railway system level impact assessmentFinal report with the evaluation of the impact achieved by the ROLL²RAILproject
Operator & Passenger GoalsAn organised collection of operators and passenger functional requirements and expectations.
New Generation power semiconductor – Common specification for traction and market analysis, technology roadmap, and value cost predictionMarket survey addressing the special needs of rail industry. Develop common specification for rail traction and align roadmap together with relevant semiconductor industry.
Cost Model / MethodologyDescribing the parts and their physical behaviour behind the key cost drivers
Journey Type SummaryA review of what is the train journey types and their frequencies, to focus the project on the future market needs.
Attractiveness & Comfort Features ReportReport on the features in interior train design that are important to the attractiveness and comfort as experienced by the passengers for their different journeys.
Validation against Infrastructure TypesValidates the Model for different vehicles across different country specific situations.
Top level specification from Operators & Technology Search results systemsCapture and compile requirements of operators, normative bodies and vehicle builders for future rail traction systems. Definition of know-how transfer frame work, short form of technology search results and transfer activity. Booklet of identified and compiled technology reports. Academia and Industry included
Energy Norms & Standards Application guide for KPI generationThe application guide gives straightforward recommendations on how to apply knowledge from Norms and Standards for KPI generation.
Car bodyshell specificationTechnical specification to describe in detail all characteristics and minimum conditions to be met by the new composite material car bodyshell, as well as the definition of the composite material technological solutions for each car bodyshell subpart and the corresponding interfaces.
Final Report on Universal Cost modelDocuments the results of the project, with the clear target to enable and prepare application of the universal cost model in the real world.
Specification of the Wireless TCMSDocument describing the requirements that should be fulfilled to have a wireless TCMS.
Dissemination PlanThis will detail the objectives and strategy for the dissemination of the project, as well as detailing the methods to be used for dissemination and communication.
Scenarios, and selection of most viable setup for Universal Cost modelDescribes potential scenarios for a Universal cost model, and selects most viable setup for the model
Attractiveness & Comfort FeaturesList of the features that are relevant for attractiveness and comfort of a train interior and a weighting of their importance for different types of operation. Identifying knowledge gaps in the current way train interiors are defined.
Simulation of Selected Suitable TechnologiesThe content of this document lists the radio technologies and their comprehensive description that have been pre-selected through a number of simulation and studies, and which together with appropriate architectures may fulfil the specification.
Architecture for the Train and Consist Wireless NetworksDocument which describes the proposed architecture of the wireless networks for the selected applications and which serves as input for the IEC 61375 standard series.
Performance compilation of rail traction system/equipmentPerformance of current best in class traction system and equipment for baseline setting.
Summary of Existing Requirements for Interior DesignChart of corresponding standards and norms with areas that they affect in interior design highlighted
Publications
Auteurs:
IKERLAN
Publié dans:
Numéro 29.05.2015, 2015
Éditeur:
IKERLAN
Auteurs:
UNIFE
Publié dans:
Horizon Magazine, Numéro 27 April 2016, 2016
Éditeur:
Horizon Magazine
Auteurs:
SIEMENS, ALS, BT, CAF, DB
Publié dans:
Workshop on Semiconductor Reliability, 2017
Éditeur:
N.A.
Auteurs:
DB, SIEMENS, ISVR
Publié dans:
Bahnakustik, Numéro November 2016, 2016
Éditeur:
Bahnakustik
Auteurs:
BT, TALGO, UNIFE
Publié dans:
Global Railway Review, 2017
Éditeur:
Roll2Rail
Auteurs:
UNIFE
Publié dans:
TRA2016, 2016
Éditeur:
TRA2016
Auteurs:
SIEMENS
Publié dans:
7. ETG-Fachtagung Bauelemente der Leistungselektronik und ihre Anwendungen in Bad Nauheim, 2017
Éditeur:
N.a.
Auteurs:
DLR
Publié dans:
DLR Magazin, Numéro 151-152, 2017, Page(s) 28-29, ISSN 2190-0108
Éditeur:
DLR
Auteurs:
DLR
Publié dans:
DLR website, press release, 19 April 2016, 2016
Éditeur:
DLR
Auteurs:
CAF
Publié dans:
ICT on TRAINS, 2017
Éditeur:
ICT on TRAINS
Auteurs:
Eulalia Peris; Javier Goikoetxea
Publié dans:
European Railway Review, Numéro Volume 21, Numéro 5, 2015, Page(s) 56-58, ISSN 1351-1599
Éditeur:
Russell Publishing
Auteurs:
Eulalia Peris; Adam Mirza
Publié dans:
European Railway Review, Numéro Volume 21, Numéro 6, 2015, Page(s) 42-44, ISSN 1351-1599
Éditeur:
Russell Publishing
Auteurs:
Eduardo de la Guerra Ochoa
Publié dans:
2016
Éditeur:
Fundación de los Ferrocarriles Españoles
Auteurs:
Eduardo de la Guerra Ochoa
Publié dans:
Via Libre, 2016
Éditeur:
Fundación de los Ferrocarriles Españoles
Auteurs:
Gerald Schleinzer, Adam Mirza, Ulf Orrenius, David Thompson, Egoitz Iturritxa,
Ines Lopez Arteaga, Antoine Malkoun, Matthias Stangl, Beatriz Martin Lopez
Publié dans:
2016
Éditeur:
Slovenian Acoustical Society
Auteurs:
Matthias Stangl
Publié dans:
2016
Éditeur:
4. Fachtagung Bahnakustik
Auteurs:
BT, KTH, TRV
Publié dans:
IAVSD, 2017, ISBN 9781-138035713
Éditeur:
CRC Press
Auteurs:
KTH, ISVR
Publié dans:
International Congress on Acoustics, Buenos Aires, Numéro 5-9 September 2016, 2016
Éditeur:
International Congress on Acoustics
Auteurs:
BT, VIF, SIE, KTH
Publié dans:
Moderne Schienenfahrzeuge, 2016
Éditeur:
Moderne Schienenfahrzeuge
Auteurs:
CAF, UNIFE
Publié dans:
Transportation Research Procedia, 2016, Page(s) 567-574
Éditeur:
Elsevier
Auteurs:
KTH
Publié dans:
19th Nordic Seminar on Railway Technology, 2016
Éditeur:
19th Nordic Seminar on Railway Technology
Auteurs:
Inaki Val, Aitor Arriola, Pedro M Rodriguez, Ana Gonzalez-Plaza, David Alonso, Lei Zhang, Cesar Briso, Juan Moreno, Carlos Rodriguez Sanchez, Eneko Echeverria, Javier Goikoetxea
Publié dans:
2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Page(s) 108-112, ISBN 978-8-8907-0187-0
Éditeur:
IEEE
DOI:
10.23919/EuCAP.2017.7928370
Auteurs:
BT, KTH, TRV
Publié dans:
IAVSD, 2017, ISBN 9781-138035713
Éditeur:
CRC Press
Auteurs:
IKERLAN, CAF, THA, UNICONTROL
Publié dans:
2018 12th European Conference on Antennas and Propagation (EUCAP), 2018
Éditeur:
EUCAP
Auteurs:
Kun Yang, Marion Berbineau, Jean-Pierre Ghys, Yann Cocheril, Divitha Seetharamdoo
Publié dans:
2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Page(s) 126-130, ISBN 978-8-8907-0187-0
Éditeur:
IEEE
DOI:
10.23919/EuCAP.2017.7928494
Auteurs:
Paul Unterhuber, Stephan Sand, Mohammad Soliman, Benjamin Siebler, Andreas Lehner, Thomas Strang, Maurizio d'Atri, Fabrizio Tavano, Damini Gera
Publié dans:
2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Page(s) 3356-3360, ISBN 978-8-8907-0187-0
Éditeur:
IEEE
DOI:
10.23919/EuCAP.2017.7928309
Auteurs:
KTH, STDV, CAF, SIE, ViF
Publié dans:
Transport Research Arena (TRA) 2018, 2018
Éditeur:
TRA2018
Auteurs:
DLR, IFSTTAR, IKERLAN Trenitalia, MDM
Publié dans:
38th Meeting of the Wireless World Research Forum, 2017
Éditeur:
ReseearchGate
Auteurs:
Paul Unterhuber, Mohammad Soliman, Andreas Lehner
Publié dans:
Nets4Trains 2017, 2017, Page(s) 72-83
Éditeur:
Springer International Publishing
DOI:
10.1007/978-3-319-56880-5_8
Auteurs:
DLR
Publié dans:
WWRF 39 Meeting, 2017
Éditeur:
WWRF
Auteurs:
Eduardo de la Guerra Ochoa
Publié dans:
XXI Congreso Nacional de Ingeniería Mecánica, Numéro no. 21. Bi-annual, 2016, Page(s) 770-777, ISBN 978-84-16024-37-7
Éditeur:
Universidad Miguel Hernández de Elche
Auteurs:
Elias Zea
Luca Manzari
Ines Lopez Arteaga
Giacomo Squicciarini
David Thompson
Publié dans:
22nd International Congress on Acoustics, Numéro Every three years, 2016, Page(s) Page1-Page10
Éditeur:
International Commission for Acoustics (ICA)
Auteurs:
Mohammad Soliman, Paul Unterhuber, Damini Gera
Publié dans:
2016 International Symposium on Wireless Communication Systems (ISWCS), 2016, Page(s) 451-455, ISBN 978-1-5090-2061-4
Éditeur:
IEEE
DOI:
10.1109/ISWCS.2016.7600946
Auteurs:
KTH, ISVR
Publié dans:
Journal of Sound and Vibration, Numéro Volume 409, 2017, Page(s) 24-42, ISSN 0022-460X
Éditeur:
Academic Press
Auteurs:
ISVR, KTH, ALS, CAF, DB ST, SIE, TALGO, SNCF, BT
Publié dans:
Applied Acoustics, 2017, ISSN 0003-682X
Éditeur:
Pergamon Press Ltd.
Auteurs:
Juan Moreno Garcia-Loygorri, Inaki Val, Aitor Arriola, Cesar Briso-Rodriguez
Publié dans:
IEEE Access, Numéro 5, 2017, Page(s) 23052-23059, ISSN 2169-3536
Éditeur:
Institute of Electrical and Electronics Engineers Inc.
DOI:
10.1109/ACCESS.2017.2759324
Auteurs:
Eulalia Peris, Javier Goikoetxea
Publié dans:
Transportation Research Procedia, Numéro 14, 2016, Page(s) 567-574, ISSN 2352-1465
Éditeur:
Elsevier
DOI:
10.1016/j.trpro.2016.05.294
Auteurs:
Paul Unterhuber, Stephan Pfletschinger, Stephan Sand, Mohammad Soliman, Thomas Jost, Aitor Arriola, Iñaki Val, Cristina Cruces, Juan Moreno, Juan Pablo García-Nieto, Carlos Rodríguez, Marion Berbineau, Eneko Echeverría, Imanol Baz
Publié dans:
Mobile Information Systems, Numéro 2016, 2016, Page(s) 1-14, ISSN 1574-017X
Éditeur:
IOS Press
DOI:
10.1155/2016/7308604
Auteurs:
DLR
Publié dans:
Bahn-Manager Magazin, 2016, ISSN 2367-1998
Éditeur:
Bahn-Manager Magazin
Auteurs:
DLR
Publié dans:
IET Microwaves, Antennas & Propagation, 2017, ISSN 1751-8733
Éditeur:
IET Institution of Engineering and Technology
Auteurs:
DLR
Publié dans:
IET Microwaves, Antennas & Propagation, 2017, ISSN 1751-8733
Éditeur:
IET Institution of Engineering and Technology
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible