Obiettivo
An estimated one billion tyres are discarded each year. Post-Consumer tyre arisings for EU countries (2010) are 3.4M tonnes per year. At the moment nearly 50% of all recycled tyres/components still end up as fuel, in low grade applications or in landfill.
All tyre constituents (rubber, high strength steel cord and wire, high strength textile reinforcement) are high quality materials and deserve to be reused for their relevant properties.
Construction is the highest user of materials with concrete being the most popular structural material. Concrete is inherently brittle in compression (unless suitably confined) and weak in tension and, hence, it is normally reinforced with steel bars or fibres. The authors believe that highly confined rubberised concrete can lead to highly deformable concrete elements and structures and that tyre steel and textile fibres can be used as concrete reinforcement to control shrinkage cracking.
Hence, the aim of this proposal is to develop innovative solutions to reuse all tyre components in high value innovative concrete applications with reduced environmental impact.
To achieve this aim, the proposed project will have to overcome scientific and technological challenges in:
• Development of novel confined rubberised concrete materials and reinforcement
• Development of high deformability RC elements suitable for integral bridge elements and base isolation systems for vibrations and seismic applications
• Development of concrete mixes using recycled steel fibres for use in various applications such as slabs on grade, suspended slabs, precast concrete elements and pumpable self compacting concrete or screed
• Development of concrete mixes using recycled tyre polymer fibres for crack control
• Development of novel concrete applications using combinations of the different tyre by-products
• Undertaking demonstrations projects using the developed materials/applications
• Development and implementation of standardised LCA/LCCA protocols
Campo scientifico
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
Programma(i)
Argomento(i)
Invito a presentare proposte
FP7-ENV-2013-two-stage
Vedi altri progetti per questo bando
Meccanismo di finanziamento
CP - Collaborative project (generic)Coordinatore
S10 2TN Sheffield
Regno Unito
Mostra sulla mappa
Partecipanti (16)
SW7 2AZ LONDON
Mostra sulla mappa
S3 7RD SHEFFIELD
Mostra sulla mappa
10000 Zagreb
Mostra sulla mappa
47250 DUGA RESA
Mostra sulla mappa
76250 Gradacac
Mostra sulla mappa
Partecipazione conclusa
31000 OSIJEK
Mostra sulla mappa
42230 LUDBREG
Mostra sulla mappa
42000 Varazdin
Mostra sulla mappa
700050 Iasi
Mostra sulla mappa
3036 Lemesos
Mostra sulla mappa
Partecipazione conclusa
1510 LEFKOSIA
Mostra sulla mappa
Partecipazione conclusa
67027 RAIANO
Mostra sulla mappa
67000 Strasbourg
Mostra sulla mappa
08014 Barcelona
Mostra sulla mappa
28004 MADRID
Mostra sulla mappa
Partecipazione conclusa
28026 MADRID
Mostra sulla mappa