Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenido archivado el 2024-06-18

Innovative Reuse of All Tyre Components in Concrete

Objetivo

An estimated one billion tyres are discarded each year. Post-Consumer tyre arisings for EU countries (2010) are 3.4M tonnes per year. At the moment nearly 50% of all recycled tyres/components still end up as fuel, in low grade applications or in landfill.

All tyre constituents (rubber, high strength steel cord and wire, high strength textile reinforcement) are high quality materials and deserve to be reused for their relevant properties.

Construction is the highest user of materials with concrete being the most popular structural material. Concrete is inherently brittle in compression (unless suitably confined) and weak in tension and, hence, it is normally reinforced with steel bars or fibres. The authors believe that highly confined rubberised concrete can lead to highly deformable concrete elements and structures and that tyre steel and textile fibres can be used as concrete reinforcement to control shrinkage cracking.

Hence, the aim of this proposal is to develop innovative solutions to reuse all tyre components in high value innovative concrete applications with reduced environmental impact.

To achieve this aim, the proposed project will have to overcome scientific and technological challenges in:
• Development of novel confined rubberised concrete materials and reinforcement
• Development of high deformability RC elements suitable for integral bridge elements and base isolation systems for vibrations and seismic applications
• Development of concrete mixes using recycled steel fibres for use in various applications such as slabs on grade, suspended slabs, precast concrete elements and pumpable self compacting concrete or screed
• Development of concrete mixes using recycled tyre polymer fibres for crack control
• Development of novel concrete applications using combinations of the different tyre by-products
• Undertaking demonstrations projects using the developed materials/applications
• Development and implementation of standardised LCA/LCCA protocols

Convocatoria de propuestas

FP7-ENV-2013-two-stage
Consulte otros proyectos de esta convocatoria

Régimen de financiación

CP - Collaborative project (generic)

Coordinador

THE UNIVERSITY OF SHEFFIELD
Aportación de la UE
€ 676 772,54
Dirección
FIRTH COURT WESTERN BANK
S10 2TN Sheffield
Reino Unido

Ver en el mapa

Región
Yorkshire and the Humber South Yorkshire Sheffield
Tipo de actividad
Higher or Secondary Education Establishments
Contacto administrativo
Joanne Watson (Mrs.)
Enlaces
Coste total
Sin datos

Participantes (16)