Objetivo
The overarching goal of AMAZE is to rapidly produce large defect-free additively-manufactured (AM) metallic components up to 2 metres in size, ideally with close to zero waste, for use in the following high-tech sectors namely: aeronautics, space, automotive, nuclear fusion and tooling.
Four pilot-scale industrial AM factories will be established and enhanced, thereby giving EU manufacturers and end-users a world-dominant position with respect to AM production of high-value metallic parts, by 2016. A further aim is to achieve 50% cost reduction for finished parts, compared to traditional processing.
The project will design, demonstrate and deliver a modular streamlined work-flow at factory level, offering maximum processing flexibility during AM, a major reduction in non-added-value delays, as well as a 50% reduction in shop-floor space compared with conventional factories.
AMAZE will dramatically increase the commercial use of adaptronics, in-situ sensing, process feedback, novel post-processing and clean-rooms in AM, so that (i) overall quality levels are improved, (ii) dimensional accuracy is increased by 25% (iii) build rates are increased by a factor of 10, and (iv) industrial scrap rates are slashed to <5%.
Scientifically, the critical links between alloy composition, powder/wire production, additive processing, microstructural evolution, defect formation and the final properties of metallic AM parts will be examined and understood. This knowledge will be used to validate multi-level process models that can predict AM processes, part quality and performance.
In order to turn additive manufacturing into a mainstream industrial process, a sharp focus will also be drawn on pre-normative work, standardisation and certification, in collaboration with ISO, ASTM and ECSS.
The team comprises 31 partners: 21 from industry, 8 from academia and 2 from intergovernmental agencies. This represent the largest and most ambitious team ever assembled on this topic.
Ámbito científico
Not validated
Not validated
Convocatoria de propuestas
FP7-2012-NMP-ICT-FoF
Consulte otros proyectos de esta convocatoria
Régimen de financiación
CP-TP - Collaborative Project targeted to a special group (such as SMEs)Coordinador
CV7 9JU Coventry
Reino Unido
Ver en el mapa
Participantes (28)
La participación finalizó
28062 CAMERI
Ver en el mapa
0255 OSLO
Ver en el mapa
75015 PARIS
Ver en el mapa
67400 Illkirch Graffenstaden
Ver en el mapa
96215 LICHTENFELS
Ver en el mapa
GL12 8JR Wotton Under Edge
Ver en el mapa
71254 Ditzingen
Ver en el mapa
44263 DORTMUND
Ver en el mapa
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Ver en el mapa
92220 BAGNEUX
Ver en el mapa
CB1 7EG Cambridge
Ver en el mapa
80686 Munchen
Ver en el mapa
82024 Taufkirchen
Ver en el mapa
10040 Rivalta Di Torino
Ver en el mapa
405 08 Goteborg
Ver en el mapa
31100 Toulouse
Ver en el mapa
BT3 9DZ Belfast
Ver en el mapa
OX14 3DB Abingdon
Ver en el mapa
M13 9PL Manchester
Ver en el mapa
B15 2TT Birmingham
Ver en el mapa
10129 Torino
Ver en el mapa
1015 Lausanne
Ver en el mapa
91054 Erlangen
Ver en el mapa
La participación finalizó
3800 Victoria
Ver en el mapa
MK43 0AL Cranfield - Bedfordshire
Ver en el mapa
GU14 6YU Farnborough
Ver en el mapa
SA2 8PP Swansea
Ver en el mapa
La participación finalizó
00187 ROMA
Ver en el mapa