Livrables
This deliverable will show the assessment of the multi-level system before using it in the demonstration prototypes.First trials for human-robot interaction will be performed to verify the hardware and software dependability in order to ensure an adequate deployment in the demonstration scenarios. This validation phase will be done using representative laboratory setups for the proposed demonstration scenarios and the verification process will contain multiple scenario runs.
The activities included in the Dissemination and Communication Plan will define the goals, the targeted audience and the desired activities. A dissemination and communication toolkit will include the website, flyers, videos, interviews, project leaflet (providing key information about the project in a concise and engaging message). While the Dissemination is focussed on the disclosure of project results to specific target groups, Communication is aimed to promote the project and its impacts to defined audiences. MERGING will deploy a 360 degrees Dissemination and Communication Strategy, combining online and offline channels, content marketing strategies & tools, media relations, top events and work with stakeholders.The plan will be assessed and updated two times during the project, in order to evaluate the effectiveness of the actions.This deliverable is the final version of the D and C Plan.
MERGING WorkshopA final seminar, “MERGING Workshop”, will be organized (and webcast) by the end of the project aiming to: gather all stakeholders from several sectors (industry, education, standardization bodies, etc.), present the main results and expected gains of its deployment for the targeted markets and to provide a faster acceptance and integration of the project results in industrial value chain.Specifications of broader use of applications will be provided in order to verify if results could be relevant to a larger field of textiles and films applications or to other domains (new market potential), a pathway will be defined for the commercialization of the low-cost solution.
Dissemination and Communication Plan (revised)The activities included in the Dissemination and Communication Plan will define the goals the targeted audience and the desired activities A dissemination and communication toolkit will include the website flyers videos interviews project leaflet providing key information about the project in a concise and engaging message While the Dissemination is focussed on the disclosure of project results to specific target groups Communication is aimed to promote the project and its impacts to defined audiences MERGING will deploy a 360 degrees Dissemination and Communication Strategy combining online and offline channels content marketing strategies tools media relations top events and work with stakeholdersThe plan will be assessed and updated two times during the project in order to evaluate the effectiveness of the actionsThis deliverable is the updated version of the D and C Plan
Gripper and skin demonstrator"This deliverable will be constituted by the enhanced gripper prototypes made of the new low-cost gripper designs integrated with the new electro-adhesive skins.It will illustrate the integration of the separate developments described in deliverable ""Report on gripping technologies"". Considering necessary adjustments (mechanical, electronic, sensing and control integration, considering also the skin behavior impact onthe other characteristics of the hardware design), the final enhanced prototype grippers will be manufactured. This deliverable will be used in the following work packages (WP7 and WP8)."
Robot control functionalities demonstrationThis deliverable will show the functionalities of the robot arm control technologies described in deliverable 'Report on robot arm control technologies', through experimental demonstration of elementary use from user's side :- a set of assistance tools/schemes, among which the control algorithm will be able to propose automatically to the operator the best fitted one during the execution of each step inside the global task.- an on-line robot control law for the control of robot arm under human-machine interaction, servoing the shape of the flexible part that will be modified by the co-manipulation operation.- a 'supervised learning algorithm' allowing the robot to adapt in real time to the environment and flexible object during execution phases in the production line.
Dissemination and Communication Plan (initial)The activities included in the Dissemination and Communication Plan will define the goals, the targeted audience and the desired activities. A dissemination and communication toolkit will include the website, flyers, videos, interviews, project leaflet (providing key information about the project in a concise and engaging message). While the Dissemination is focussed on the disclosure of project results to specific target groups, Communication is aimed to promote the project and its impacts to defined audiences. MERGING will deploy a 360 degrees Dissemination and Communication Strategy, combining online and offline channels, content marketing strategies & tools, media relations, top events and work with stakeholders. The plan will be assessed and updated two times during the project, in order to evaluate the effectiveness of the actions. This deliverable is the initial version of the D and C Plan.
The website will be designed in accordance with the visual project identity. All the public project materials documents, data, reports as well as dissemination and communication materials (print and digital) will be accessible from the website. The website will be regularly updated (every 2 months) and maintained throughout the project.
On-line training materialA version of the training material (detailed in the Training Plan) -excluding confidential information-, will be made available on-line to ensure training opportunities are widely available for EU workforce.
Publications
Auteurs:
Bekir Aksoy, Yufei Hao, Giulio Grasso, Krishna Manaswi Digumarti, Vito Cacucciolo, Herbert Shea
Publié dans:
Nature Communications, Numéro 2023, 2022, ISSN 2041-1723
Éditeur:
Nature Publishing Group
DOI:
10.1038/s41467-022-32391-0
Auteurs:
Giorgos Papadopoulos, Dionisis Andronas, Emmanouil Kampourakis, Nikolaos Theodoropoulos, Panagiotis Stylianos Kotsaris, Sotiris Makris
Publié dans:
The International Journal of Advanced Manufacturing Technology, Numéro 2023, 2023, ISSN 0268-3768
Éditeur:
Springer Verlag
DOI:
10.1007/s00170-023-11914-z
Auteurs:
Konstantinos Kavvathas; Emmanouil Kampourakis; Dionisis Andronas; Nikolaos Fousekis; Sotiris Makris
Publié dans:
International Journal of Computer Integrated Manufacturing, Numéro 12, 2024, Page(s) 1-24, ISSN 1362-3052
Éditeur:
Taylor & Francis
DOI:
10.1080/0951192x.2024.2331533
Auteurs:
Sotiris Makris, Emmanouil Kampourakis, DionisisAndronas
Publié dans:
CIRP Annals, Numéro 2022, 2022, ISSN 0007-8506
Éditeur:
Hallwag AG
DOI:
10.1016/j.cirp.2022.04.048
Auteurs:
Nikolaos Theodoropoulos, Emmanouil Kampourakis, Dionisis Andronas, Sotiris Makris
Publié dans:
Journal of Manufacturing Systems, Numéro 2023, 2023, Page(s) 525-537, ISSN 0278-6125
Éditeur:
Elsevier BV
DOI:
10.1016/j.jmsy.2023.08.022
Auteurs:
Sotiris Makris, Franz Dietrich, Karel Kellens, S.Jack Hu
Publié dans:
CIRP Annals, Numéro 2023, 2023, Page(s) 513-539, ISSN 0007-8506
Éditeur:
Hallwag AG
DOI:
10.1016/j.cirp.2023.05.003
Auteurs:
Papacharalampopoulos, Alexios; Makris, Sotiris
Publié dans:
Procedia CIRP, Numéro Volume 97, 2021, Page(s) 71-75, ISSN 2212-8271
Éditeur:
Elsevier
DOI:
10.1016/j.procir.2020.05.206
Auteurs:
Ugo Vollhardt; Maria Makarov; Alex Caldas; Mathieur Grossard; Pedro Rodriguez-Ayerbe
Publié dans:
IFAC-PapersOnLine, Numéro 2020, 2020, Page(s) 9905-9911, ISSN 2405-8963
Éditeur:
Kidlington: Elsevier Ltd
DOI:
10.1016/j.ifacol.2020.12.2698
Auteurs:
Andronas, Dionisis; Kokotinis, George; Makris, Sotiris
Publié dans:
Procedia CIRP, Numéro Volume 97, 2021, Page(s) 447-452, ISSN 2212-8271
Éditeur:
Elsevier
DOI:
10.1016/j.procir.2020.08.005
Auteurs:
Paolillo A, Colella F, Nosengo N, Schiano F, Stewart W, Zambrano D, Chappuis I, Lalive R, Floreano D.
Publié dans:
Science Robotics, Numéro 13;7(65), 2022, ISSN 2470-9476
Éditeur:
AAAS
DOI:
10.1126/scirobotics.abg5561
Auteurs:
Andrea Fernández Martínez, Carlos González-Val, Daniel Gordo Martín, Alberto Botana López, Jose Angel Segura Muros, Afra Maria Petrusa Llopis, Jawad Masood, and Santiago Muiños-Landin
Publié dans:
Artificial Intelligence in Manufacturing - Enabling Intelligent, Flexible andCost-Effective Production Through AI, Numéro February 2024, 2024, Page(s) 195-216, ISBN 978-3-031-46452-2
Éditeur:
J. Soldatos, SPRINGER
DOI:
10.1007/978-3-031-46452-2_11
Auteurs:
Diego Perez, Dionisis Andronas
Publié dans:
2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2021), Numéro 27 September 2021, 2021, Page(s) RoMaDO-RA workshop (Robotic Manipulation of Deformable Objects: Challenges in Perception, Planning and Control for Real-World Applications)
Éditeur:
IEEE/RSJ
Auteurs:
González Val, Carlos et al.
Publié dans:
Zenodo open source data and project, Numéro 12 July 2023, 2023
Éditeur:
Zenodo
DOI:
10.5281/zenodo.8138878
Auteurs:
Vito Cacucciolo
Publié dans:
Volume PC12741, Advanced Materials, Biomaterials, and Manufacturing Technologies for Security and Defence, Numéro Proc. SPIE PC127410C, 2023
Éditeur:
SPIE Security + Defence
DOI:
10.1117/12.2687962
Auteurs:
Vito Cacucciolo (workshop W9, co-organizer and presenter)
Publié dans:
"2023 IEEE-RAS International Conference on Soft Robotics ROBOSOFT - Workshop 9 : ""Soft grippers: from the labs to the market""", Numéro 6th conference, 3-7 April 2023, 2023
Éditeur:
IEEE
DOI:
10.1109/robosoft55895.2023
Auteurs:
Merging consortium
Publié dans:
2019
Éditeur:
Laboratory for Manufacturing Systems and Automation (LMS)
Auteurs:
Michael Smith, Krishna Manaswi Digumarti, Vito Cacucciolo, Herbert Shea
Publié dans:
Volume PC12042, Electroactive Polymer Actuators and Devices (EAPAD) XXIV, Numéro Proc. SPIE PC120420A, 2022
Éditeur:
SPIE Smart Structures + Nondestructive Evaluation
DOI:
10.1117/12.2615068
Auteurs:
Vito Cacucciolo (invited presenter)
Publié dans:
Transducers 2023 - IEEE International Conference on Solid-State Sensors, Actuators and Microsystems, Numéro 22nd conference, 25-29 June 2023, 2024
Éditeur:
IEEJ Transactions on Electrical and Electronic Engineering
Auteurs:
Krishna Manaswi Digumarti; Vito Cacucciolo; Herbert Shea
Publié dans:
2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Numéro 2021, 2021
Éditeur:
IEEE
DOI:
10.1109/iros51168.2021.9636095
Auteurs:
J. Dumora, J. Nicolas, F. Geffard
Publié dans:
2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Numéro 2022, 2022, Page(s) 2111-2118
Éditeur:
IEEE
DOI:
10.1109/iros47612.2022.9981993
Auteurs:
D. Andronas, E. Kampourakis, K. Bakopoulou, C. Gkournelos, P. Angelakis and S. Makris,
Publié dans:
26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), Numéro 2021, 2021, Page(s) 1-8
Éditeur:
IEEE
DOI:
10.1109/etfa45728.2021.9613235
Auteurs:
E. Judd, B. Aksoy, K. M. Digumarti, H. Shea, D. Floreano
Publié dans:
2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Numéro 2022, 2022, Page(s) 10003-10008
Éditeur:
IEEE
DOI:
10.1109/iros47612.2022.9981174
Auteurs:
T. Mokadim F. Gosselin
Publié dans:
2022 31st IEEE International Conference on Robot and Human Interactive Communication (RO-MAN), Numéro 2022, 2022, Page(s) 29-36
Éditeur:
IEEE
DOI:
10.1109/ro-man53752.2022.9900729
Auteurs:
F. Gosselin, G. Acher, B. Gradoussoff, S. Kchir, F. Keith, O. Lebec, C. Louison, B. Luvison, F. Mayran de Chamisso, B. Meden, V. Molina, M. Morelli, J. Rabarisoa, C. Vienne, G. Ameyugo
Publié dans:
2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), Numéro 2023, 2023, Page(s) 1-8
Éditeur:
IEEE
DOI:
10.1109/case56687.2023.10260553
Auteurs:
Afra Marıa Pertusa Llopis, Adriana Costas Lopez, Jawad Masood
Publié dans:
"2023 IEEE-RAS International Conference on Robotics and Automation ICRA - Workshop FW15 : ""Cognitive Modelling in Robot Learning for adaptive Human-Robot interactions""", Numéro 29 May - 2 June 2023, 2023
Éditeur:
IEEE
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible