Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Innovative pilot for Silicon production with low environmental impact using secondary Aluminium and silicon raw materials

Resultado final

Project video

Related to Task 62INNEN will produce a project video with high quality to promote the project explaining the need for this project and to separate equipmenthigh value sources the wider European and international scope and promoting the projects results The video will be released on the projects website after its launch on the Task 63 clustering event but also through other social media if effective for our projects purpose of creating more outreach

SisAl parametric studies

Publication based on work related to D21 Task 21

Dissemination kit, 2nd version

This is the 2nd version of the report in a series of 3 versions of which the content was described before in D62

Alkaline alumina leaching from CaO-Al2O3 slag

Journal publication based on results obtained in D32 Task 31

Report on clustering event EIT

Related to Task 63The consortium will also organise 1 joint clustering event under the umbrella of EIT Raw materials with an international research focus inviting among others our international collaborators Conclusions of the workshops will be public described in SisAl Pilots website as well as in this deliverable

Acid alumina leaching from CaO-Al2O3 slag

Journal publication based on results obtained in D33 Task 31

Dissemination kit, 1st version

This is the 1st version of the report in a series of 3 versionsRelated to Task 61The dissemination kit will include the tools with the right level of project public information for all partners to be used when attending events More specific the kit will include items such as the project logo project public presentations a 2pager brochureflyer and multimedia material which will be presented and distributed on each occasion Templates for presentations deliverables and reports will be updated when necessary

Publicaciones

Modelling of the ladle furnace preheating with a graphite heating rod

Autores: Sergey Semenov, Patrick Namy, Magnus Sievers, Bernd Friedrich, John Fors, Krister Engvoll,
Publicado en: Technical Papers and Presentations from the COMSOL Conference 2023, 2023, ISBN 978-1-7364524-1-7
Editor: COMSOL Conference 2023

SisAl – A New Process for Production of Silicon

Autores: Tranell, Gabriella; Safarian, Jafar; Wallin, Maria
Publicado en: Silicon for the Chemical and Solar Industry XV., 2020, Página(s) 129-139, ISBN 978-82-997357-9-7
Editor: NTNU

Sustainable Silicon and High Purity Alumina Production from Secondary Silicon and Aluminium Raw Materials through the Innovative SisAl Technology

Autores: Aikaterini Toli, Georgia Maria Tsaousi, Efthymios Balomenos, Dimitrios Panias, Matthias Heuer, Harald Philipson and Gabriella Tranell
Publicado en: Conference Proceedings volume of Materials Proceedings journal (MDPI), 2021
Editor: Materials processdings
DOI: 10.3390/materproc2021005085

Mathematical modeling and numerical simulation in SisAl project, an innovative pilot for silicon production

Autores: Alfredo Bermúdez, Jorge Albella, Óscar Crego, José Luis Ferrín, Branca García, Dolores Gómez and Pilar Salgado
Publicado en: XXVI Congress of Differential Equations and Applications, 2022
Editor: CEDYA/CMA

Kinetics of silicon production by aluminothermic reduction of silica using aluminium and aluminium dross as reductants

Autores: Philipson, Harald; Gjermund L., Solbakk; Wallin, Maria; Einarsrud, Kristian Etienne; Tranell, Gabriella.
Publicado en: INFACON XVI - September 27 - 29, 2021, 2021
Editor: Elsevier/SSRN

Recovery Via the Acid Leaching of a Si-Ca-Al Alloy

Autores: Zhu, Mengyi and Arntsen, Anne Sofie and Safarian, Jafar,
Publicado en: Silicon for the Chemical & Solar Industry XVI, 2022
Editor: SSRN
DOI: 10.2139/ssrn.4123122

Preliminary Techno-Economic Considerations of the Sisal Process - Closing Materials Loops through Industrial Symbiosis

Autores: Philipson, Harald and Blandhol, Kjell and Engvoll, Krister and Djupvik, Veronika and Wallin, Maria and Tranell, Gabriella and Haarberg, Torstein
Publicado en: Silicon for the Chemical & Solar Industry XVI, 2022, ISBN 978-82-692919-0-2
Editor: SSRN
DOI: 10.2139/ssrn.4116381

New Metallurgical Way for the Solar Silicon Production

Autores: Javier Bullon
Publicado en: Proceedings of the Silicon for the Chemical & Solar Industry XVI, 2022, ISBN 978-82-692919-0-2
Editor: SSRN
DOI: 10.2139/ssrn.4117713

Numerical modelling of aluminothermic reduction for low-carbon-footprint silicon production

Autores: Sergey Semenov, Raphaël Bayle and Patrick Namy
Publicado en: Proceedings of the 34th European Modeling & Simulation Symposium (EMSS 2022), 19th International Multidisciplinary Modeling & Simulation Multiconference, Edición 17, 2022
Editor: Simulation Team, Liophant Simulation, University of Genoa, University of Calabria and CAL-TEK

Silicon recovery via the acid leaching of a Si-Ca-Al alloy produced by the SisAl process

Autores: Mangyi Zuh; Anne Sofie Arntsen; Jafar Safarian
Publicado en: Proceedings of the Silicon for the Chemical & Solar Industry XVI, Edición 3, 2022, ISBN 978-82-692919-0-2
Editor: SSRN
DOI: 10.5281/zenodo.8033209

The Effect of Varying CaO/SiO2 Ratios and Reductant Addition in Silicon Production by Aluminothermic Reduction of Silica Based Slags

Autores: Gjermund Lie Solbakk
Publicado en: MSc thesis, 2021
Editor: NTNU Open

Life Cycle Assessment of silicon metal by aluminothermic reduction: an industrial symbiosis approach

Autores: Elisa Pastor Vallés
Publicado en: MSc thesis, 2021
Editor: NTNU Open

Mass and Energy Balanced Life Cycle Assessment of Metallurgical Grade Silicon Production

Autores: Cathrine Nøstvold
Publicado en: MSc thesis, 2022
Editor: NTNU Open

Analyzing the sustainability of the aluminothermic reduction of silicon metal: A combined approach of MFA and spatial LCA

Autores: Leonhard Maxim Bodau
Publicado en: MSc thesis, 2022
Editor: NTNU Open

Continued study to aluminothermic reduction process for silicon production

Autores: Nishan Simkhada
Publicado en: MSc thesis, 2022
Editor: NTNU Open

Life Cycle Assessment of Silicon Metal by Aluminothermic Reduction

Autores: Valles, Elisa Pastor; Ma, Yan; Pettersen, Johan Berg
Publicado en: The 10th International Conference on Life Cycle Management (LCM2021), Edición 16, 2021
Editor: Zenodo
DOI: 10.5281/zenodo.7123626

Investigation of Liquid–Liquid Reaction Phenomena of Aluminum in Calcium Silicate Slag

Autores: Harald G. R. Philipson, Maria Wallin, Kristian Etienne Einarsrud
Publicado en: Materials, Edición 17, 2024, Página(s) 1466, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma17071466

Rheological properties of Al2O3–CaO–SiO2 slags

Autores: Kai Tang; Casper van der Eijk; Sylvain Gouttebroze; Qiang Du; Jafar Safarian; Gabriella Tranell
Publicado en: Calphad, Computer Coupling of Phase Diagrams and Thermochemistry 77, Edición 5, 2022, ISSN 0364-5916
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.calphad.2022.102421

Aluminothermic Reduction Kinetics of Calcium Silicate Slag for Silicon Alloy Production

Autores: Harald G. R. Philipson, Maria Wallin, Kristian Etienne Einarsrud
Publicado en: Metals, Edición 14, 2024, Página(s) 604, ISSN 2075-4701
Editor: MDPI
DOI: 10.3390/met14060604

Control of Silica Gel Formation in the Acidic Leaching of Calcium Aluminate Slags with Aqueous HCl for Al Extraction

Autores: Georgia Maria Tsaousi, Aikaterini Toli, Amalia Bempelou, Dimitrios Kotsanis, Michail Vafeias, Efthymios Balomenos, Dimitrios Panias
Publicado en: Sustainability, Edición 15, 2023, Página(s) 15462, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su152115462

LCA of recycling aluminium incineration bottom ash, dross and shavings in a rotary furnace and environmental benefits of salt-slag valorisation

Autores: Alicia Vallejo Olivares, Elisa Pastor-Vallés, Johan Berg Pettersen, Gabriella Tranell
Publicado en: Waste Management, Edición 182, 2024, Página(s) 11-20, ISSN 0956-053X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2024.04.023

Transient mathematical modelling of a gas rotary furnace for melting slag

Autores: O. Crego, J.L. Ferrín, D. Gómez, L.J. Pérez-Pérez, P. Salgado
Publicado en: Applied Thermal Engineering, Edición 246, 2024, Página(s) 122928, ISSN 1359-4311
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2024.122928

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles