Thermoplastic material allowable generation using a reliability-based virtual modeling platform

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

State of the art review on analysis models for thermoplastics

Document containing a state of the art review on analysis models for thermoplastics

Plan for the Communication, Dissemination and Exploitation of Results

Details and actions foreseen in the dissemination, exploitation and communication plans discussed and agreed between the partners and the Topic Manager. It summarises the beneficiaries’ strategy and concrete actions related to the communication, dissemination, exploitation and protection of the project results. This document is a living document and shall be updated/confirmed as part of the Periodic and Final Reporting of the project meaning at each periodic time.

Dissemination, Exploitation, Communication and Data management actions

Report with the summary of the dissemination and communication actions performed during the project This deliverable will also include all the scientific publications that will be published Open Access following the guidelines given in the ARTICLE 29 DISSEMINATION OF RESULTS OPEN ACCESS VISIBILITY OF JU FUNDING AND SUPPORT FROM JU MEMBERS

Data Management Plan

A set of measures to address Data Summary, Fair Data, Allocation of resources, Data security, Ethical aspects and/or other issues related to data management. This document is a living document and shall be updated/confirmed as part of the Periodic and Final Reporting of the project meaning at each periodic time

Pubblicazioni

Estimation of sensitive material properties of an open hole tension test of composite laminates

Autori: A. Sasikumar, I.R. Cózar, O. Vallmajó, S. Abdel-Monsef, M. De Lozzo, A. Turon
Pubblicato in: ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2021), 2021
Editore: COMPOSITES 2021

Modelling the finite strain behaviour of unidirectional composites: an invariant-based model with viscous effects

Autori: Igor A. Rodrigues Lopes, Pedro P. Camanho, Francisco M. Andrade Pires
Pubblicato in: ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2021)., 2021
Editore: COMPOSITES2021

Generation of design allowables on the open hole tensile strength of composite laminates using sensitivity analysis and uncertainty quantification framework

Autori: Aravind Sasikumar, Joan Ninyerola, Ivan Ruiz Cózar, Miguel Bessa, Albert Turon
Pubblicato in: 20th European Conference on Composite Materials (ECCM), 2022
Editore: ECCM

Modelling the inelastic response and progressive failure of fibre-reinforced composites at finite strains

Autori: I. A. Rodrigues Lopes, F. Danzi, P. P. Camanho, F. M. Andrade Pires, A. Arteiro.
Pubblicato in: CMN 2022, 2022
Editore: CMN

On the reliable prediction of single lap joint strength using a multi-linear cohesive zone model

Autori: S.A. Monsef, A. Turon, J. Ninyerola, A. Sasikumar
Pubblicato in: Composites testing and model identification, 2021
Editore: COMPTEST

Determination of the design allowables on the single lap joint strength of composite laminates using virtual testing

Autori: Joan Ninyerola, Aravind Sasikumar, Said Abdel-Monsef, Miguel A. Bessa, Albert Turon.
Pubblicato in: 11th European Solid Mechanics Conference (ESMC 2022), 2022
Editore: ESMC

A novel plasticity-damage constitutive model for unidirectional long fibre reinforced polymer

Autori: I.R. Cózar, P. Maimi, F. Otero, E.V. González, P.P. Camanho, S. Miot, A. Turon
Pubblicato in: XIV Congreso Nacional de Materiales Compuestos, 2022
Editore: MATCOMP

Modelling intralaminar damage mechanisms in fibre reinforced polymers at finite strains

Autori: Igor A. Rodrigues Lopes, Federico Danzi, Albertino Arteiro, Francisco M. Andrade Pires, Pedro P. Camanho
Pubblicato in: International Journal of Solids and Structures, Numero Volume 282, 2023, 112449, 2023, ISSN 0020-7683
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2023.112449

Sensitivity analysis methodology to identify the critical material properties that affect the open hole strength of composites

Autori: Aravind Sasikumar, Albert Turon et al.
Pubblicato in: Journal of Composite Materials, 2023, ISSN 0021-9983
Editore: SAGE Publications
DOI: 10.1177/00219983231163272

An invariant-based elasto-visco-plastic model for unidirectional polymer composites at finite strains

Autori: Rodrigues Lopes, Igor A.; Camanho, Pedro P.; Andrade Pires, Francisco M.; Arteiro, Albertino
Pubblicato in: International Journal of Solids and Structures, 2022, ISSN 0020-7683
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2021.111292

A three-dimensional plastic-damage model for polymer composite materials

Autori: I.R. Cózar, F. Otero, P. Maimí, E.V. González, S. Miot, A. Turon, P.P. Camanho
Pubblicato in: Composite Part A, 2022, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107198

On the use of the Combined Loading Compression fixture to estimate the intralaminar compressive fracture toughness of composites

Autori: Dalli, D., Danzi, F., Silva Campos, P.J., Arteiro, A., Camanho, P.P.
Pubblicato in: Engineering Fracture Mechanics, Numero Volume 289, 1 September 2023, Article number 109444, 2023, ISSN 0013-7944
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2023.109444

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica