Thermoplastic material allowable generation using a reliability-based virtual modeling platform

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

State of the art review on analysis models for thermoplastics

Document containing a state of the art review on analysis models for thermoplastics

Plan for the Communication, Dissemination and Exploitation of Results

Details and actions foreseen in the dissemination, exploitation and communication plans discussed and agreed between the partners and the Topic Manager. It summarises the beneficiaries’ strategy and concrete actions related to the communication, dissemination, exploitation and protection of the project results. This document is a living document and shall be updated/confirmed as part of the Periodic and Final Reporting of the project meaning at each periodic time.

Dissemination, Exploitation, Communication and Data management actions

Report with the summary of the dissemination and communication actions performed during the project This deliverable will also include all the scientific publications that will be published Open Access following the guidelines given in the ARTICLE 29 DISSEMINATION OF RESULTS OPEN ACCESS VISIBILITY OF JU FUNDING AND SUPPORT FROM JU MEMBERS

Data Management Plan

A set of measures to address Data Summary, Fair Data, Allocation of resources, Data security, Ethical aspects and/or other issues related to data management. This document is a living document and shall be updated/confirmed as part of the Periodic and Final Reporting of the project meaning at each periodic time

Publicaciones

Estimation of sensitive material properties of an open hole tension test of composite laminates

Autores: A. Sasikumar, I.R. Cózar, O. Vallmajó, S. Abdel-Monsef, M. De Lozzo, A. Turon
Publicado en: ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2021), 2021
Editor: COMPOSITES 2021

Modelling the finite strain behaviour of unidirectional composites: an invariant-based model with viscous effects

Autores: Igor A. Rodrigues Lopes, Pedro P. Camanho, Francisco M. Andrade Pires
Publicado en: ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2021)., 2021
Editor: COMPOSITES2021

Generation of design allowables on the open hole tensile strength of composite laminates using sensitivity analysis and uncertainty quantification framework

Autores: Aravind Sasikumar, Joan Ninyerola, Ivan Ruiz Cózar, Miguel Bessa, Albert Turon
Publicado en: 20th European Conference on Composite Materials (ECCM), 2022
Editor: ECCM

Modelling the inelastic response and progressive failure of fibre-reinforced composites at finite strains

Autores: I. A. Rodrigues Lopes, F. Danzi, P. P. Camanho, F. M. Andrade Pires, A. Arteiro.
Publicado en: CMN 2022, 2022
Editor: CMN

On the reliable prediction of single lap joint strength using a multi-linear cohesive zone model

Autores: S.A. Monsef, A. Turon, J. Ninyerola, A. Sasikumar
Publicado en: Composites testing and model identification, 2021
Editor: COMPTEST

Determination of the design allowables on the single lap joint strength of composite laminates using virtual testing

Autores: Joan Ninyerola, Aravind Sasikumar, Said Abdel-Monsef, Miguel A. Bessa, Albert Turon.
Publicado en: 11th European Solid Mechanics Conference (ESMC 2022), 2022
Editor: ESMC

A novel plasticity-damage constitutive model for unidirectional long fibre reinforced polymer

Autores: I.R. Cózar, P. Maimi, F. Otero, E.V. González, P.P. Camanho, S. Miot, A. Turon
Publicado en: XIV Congreso Nacional de Materiales Compuestos, 2022
Editor: MATCOMP

Modelling intralaminar damage mechanisms in fibre reinforced polymers at finite strains

Autores: Igor A. Rodrigues Lopes, Federico Danzi, Albertino Arteiro, Francisco M. Andrade Pires, Pedro P. Camanho
Publicado en: International Journal of Solids and Structures, Edición Volume 282, 2023, 112449, 2023, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2023.112449

Sensitivity analysis methodology to identify the critical material properties that affect the open hole strength of composites

Autores: Aravind Sasikumar, Albert Turon et al.
Publicado en: Journal of Composite Materials, 2023, ISSN 0021-9983
Editor: SAGE Publications
DOI: 10.1177/00219983231163272

An invariant-based elasto-visco-plastic model for unidirectional polymer composites at finite strains

Autores: Rodrigues Lopes, Igor A.; Camanho, Pedro P.; Andrade Pires, Francisco M.; Arteiro, Albertino
Publicado en: International Journal of Solids and Structures, 2022, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2021.111292

A three-dimensional plastic-damage model for polymer composite materials

Autores: I.R. Cózar, F. Otero, P. Maimí, E.V. González, S. Miot, A. Turon, P.P. Camanho
Publicado en: Composite Part A, 2022, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107198

On the use of the Combined Loading Compression fixture to estimate the intralaminar compressive fracture toughness of composites

Autores: Dalli, D., Danzi, F., Silva Campos, P.J., Arteiro, A., Camanho, P.P.
Publicado en: Engineering Fracture Mechanics, Edición Volume 289, 1 September 2023, Article number 109444, 2023, ISSN 0013-7944
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2023.109444

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar