Leistungen
The initial DEC plan will contain the strategy for the DEC of MULTIFUN results It includes first strategies and plans for ownership clarifications IPR etc for corporate exploitation and for the contribution to standards
Standardisation recommendation documentThis report includes recommendations for standardisation bodies throughout the project.
Report on the opportunities of nanotechnology for outstanding material propertiesThis public report will cover the details of the PVDbased powder modification process used in relation to the materials specifications defined in D21 Characterisation of the precursor feedstock powders using analytical materials characterization techniques eg electron microscopy and EDX will be included in the report
Public report on lessons learnedThe contents and achievements of the lessons learned from the seven demonstrators, experience feedback activities,and the effects on designing will be reported and given in an open access report. A special focus will be given to use case 3 (test equipment) and demonstrator 7 (Hydrogen Gas Temperature Control Unit), incorporating several novel features developed in MULTI-FUN primarily for other demonstrators.
Knowledge Transfer Activities Report incl. annexed Teaching & Training MaterialIn addition to D6.3, D6.6 includes all knowledge transfer activities outcomes and post-project plans to sustainably transfer know-how. It includes training/teaching materials used for end-user workshops and lessons at universities
Materials and Multi-Functionality Evaluation reportA summary of D4.1-4.3 containing all non-IP-infringing content will be provided to support the open access and open data policy of the European Commission.
Speed-Tech Forums and MULTI-FUN Talks ReportReport gathering the activities organised with SMEs.
A user guide should be created to instruct the users how to use the software being developed at WP3.
Veröffentlichungen
Autoren:
Rudolf Gradinger , Martin Schnall, Stephan Ucsnik, David Blacher – LKR Leichtmetallkompetenzzentrum, Ranshofen, Austria
Andreas Hinterer, Maximilian Stummer – INOCON Technologie, Attnang-Puchheim, Austria
Veröffentlicht in:
Additive Manufacturing Conference 2020, 2020
Herausgeber:
Additive Manufacturing Conference 2020
Autoren:
Rudolf Gradinger, Martin Schnall
Veröffentlicht in:
ADDITIVE TOOLING 2020, 2020
Herausgeber:
ADDITIVE TOOLING 2020
Autoren:
Eurico Assunção
Veröffentlicht in:
CBMAdi 2020, 2020
Herausgeber:
CBMAdi 2020
Autoren:
Rita Bola; Eurico Assunção
Veröffentlicht in:
73rd IIW Annual Assembly and International Conference IIW2020 - C-I: Additive Manufacturing, Thermal Cutting and Thermal Spray, 2020
Herausgeber:
IIW
Autoren:
A. Iturrioz; X. Angulo; P. Álvarez; A. Dominguez-Lopez; T. Pacek; S. Spalt; A. Hinterer; R. Bola
Veröffentlicht in:
74th IIW Annual Assembly and International Conference IIW2021, 2021
Herausgeber:
IIW
Autoren:
Rita Bola
Veröffentlicht in:
Welding & Cutting, 2020, Seite(n) 269-270
Herausgeber:
DVS Media GmbH
Autoren:
Helena Monteiro; Inês Lei; Gabriel Carmona Aparicio
Veröffentlicht in:
EuroNanoForum, 2021
Herausgeber:
EuroNanoForum
Autoren:
Maider Arana, Eneko Ukar, Iker Rodriguez, David Aguilar, Pedro Álvarez
Veröffentlicht in:
Materials & Design, 2022, ISSN 0264-1275
Herausgeber:
Elsevier BV
DOI:
10.1016/j.matdes.2022.110974
Autoren:
Maider Arana, Eneko Ukar, David Aguilar, Pedro Álvarez
Veröffentlicht in:
Materials Letters, Ausgabe 348, 2023, ISSN 1873-4979
Herausgeber:
Elsevier
DOI:
10.1016/j.matlet.2023.134712
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor