Deliverables
The initial DEC plan will contain the strategy for the DEC of MULTIFUN results It includes first strategies and plans for ownership clarifications IPR etc for corporate exploitation and for the contribution to standards
Standardisation recommendation documentThis report includes recommendations for standardisation bodies throughout the project.
Report on the opportunities of nanotechnology for outstanding material propertiesThis public report will cover the details of the PVDbased powder modification process used in relation to the materials specifications defined in D21 Characterisation of the precursor feedstock powders using analytical materials characterization techniques eg electron microscopy and EDX will be included in the report
Public report on lessons learnedThe contents and achievements of the lessons learned from the seven demonstrators, experience feedback activities,and the effects on designing will be reported and given in an open access report. A special focus will be given to use case 3 (test equipment) and demonstrator 7 (Hydrogen Gas Temperature Control Unit), incorporating several novel features developed in MULTI-FUN primarily for other demonstrators.
Knowledge Transfer Activities Report incl. annexed Teaching & Training MaterialIn addition to D6.3, D6.6 includes all knowledge transfer activities outcomes and post-project plans to sustainably transfer know-how. It includes training/teaching materials used for end-user workshops and lessons at universities
Materials and Multi-Functionality Evaluation reportA summary of D4.1-4.3 containing all non-IP-infringing content will be provided to support the open access and open data policy of the European Commission.
Speed-Tech Forums and MULTI-FUN Talks ReportReport gathering the activities organised with SMEs.
A user guide should be created to instruct the users how to use the software being developed at WP3.
Publications
Author(s):
Rudolf Gradinger , Martin Schnall, Stephan Ucsnik, David Blacher – LKR Leichtmetallkompetenzzentrum, Ranshofen, Austria
Andreas Hinterer, Maximilian Stummer – INOCON Technologie, Attnang-Puchheim, Austria
Published in:
Additive Manufacturing Conference 2020, 2020
Publisher:
Additive Manufacturing Conference 2020
Author(s):
Rudolf Gradinger, Martin Schnall
Published in:
ADDITIVE TOOLING 2020, 2020
Publisher:
ADDITIVE TOOLING 2020
Author(s):
Eurico Assunção
Published in:
CBMAdi 2020, 2020
Publisher:
CBMAdi 2020
Author(s):
Rita Bola; Eurico Assunção
Published in:
73rd IIW Annual Assembly and International Conference IIW2020 - C-I: Additive Manufacturing, Thermal Cutting and Thermal Spray, 2020
Publisher:
IIW
Author(s):
A. Iturrioz; X. Angulo; P. Álvarez; A. Dominguez-Lopez; T. Pacek; S. Spalt; A. Hinterer; R. Bola
Published in:
74th IIW Annual Assembly and International Conference IIW2021, 2021
Publisher:
IIW
Author(s):
Rita Bola
Published in:
Welding & Cutting, 2020, Page(s) 269-270
Publisher:
DVS Media GmbH
Author(s):
Helena Monteiro; Inês Lei; Gabriel Carmona Aparicio
Published in:
EuroNanoForum, 2021
Publisher:
EuroNanoForum
Author(s):
Maider Arana, Eneko Ukar, Iker Rodriguez, David Aguilar, Pedro Álvarez
Published in:
Materials & Design, 2022, ISSN 0264-1275
Publisher:
Elsevier BV
DOI:
10.1016/j.matdes.2022.110974
Author(s):
Maider Arana, Eneko Ukar, David Aguilar, Pedro Álvarez
Published in:
Materials Letters, Issue 348, 2023, ISSN 1873-4979
Publisher:
Elsevier
DOI:
10.1016/j.matlet.2023.134712
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available