High throughput Laser structuring with Multiscale Periodic feature sizes for Advanced Surface Functionalities

Project Information

LAMPAS

Grant agreement ID: 825132

DOI 10.3030/825132

Project closed

EC signature date 12 November 2018

Start date 1 January 2019

End date 31 October 2022

Funded under

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Total cost € 5 121 692,50

EU contribution € 5 121 692,50

Coordinated by

TECHNISCHE UNIVERSITAET DRESDEN
Germany

Deliverables

Other (3)

First update of LAMPAS communication kit

The communication kit about the project provided in Month 3 will be updated to include first interim results. An updated narrative text, photographs, slides possibly complemented by a video and any other suitable communication material, accompanied with copyright licences for the European Commission and for Photonics21, will be provided.

Second update of LAMPAS communication kit

The communication kit about the project provided in Month 3 and 18 will be updated to include conclusions and results of the project An updated narrative text photographs slides possibly complemented by a video and any other suitable communication material accompanied with copyright licences for the European Commission and for Photonics21 will be provided

Initial LAMPAS communication kit

A communication kit about the project will be provided. This will include as a minimum a narrative text, photographs, slides possibly complemented by a video and any other suitable communication material, accompanied with copyright licences for the European Commission and for Photonics21. The narrative text will target a general audience and focus on the technical achievements as well as on the economical and societal benefits for the EU.

Websites, patent fillings, videos etc. (6)

Second communication and dissemination annual report

This report will outline the communication and dissemination activities of the LAMPAS project in its second year, and will summarise progress and deliverables related to the project identity, online communication, internal communication and dissemination. Finally, the report will discuss the progress made in the first two years of the project and define upcoming priorities and tasks in the third year.

Press release announcing Pilot Line project

The Press release announcing the Pilot Line project will address the creation of promotional material, the development of a dissemination plan and the launch of the project. In particular, a press release announcing the LAMPAS project will be published, which will be translated at least in four different languages (English, Spanish, French and German) and distributed to different press agencies of the participating countries.

Stakeholder analysis and outreach plan

The stakeholder mappings strategy and outreach plan will provide a guideline and methods to map and engage with stakeholders and publics that are related to the LAMPAS project.

Project website and social media profile

The LAMPAS website will be created as well as different profiles on social media (LinkedIn and Twitter).

First communication and dissemination annual report

This report will outline the communication and dissemination activities of the LAMPAS project in its first year, and will summarise progress and deliverables related to the project identity, online communication, internal communication and dissemination. Finally, the report will discuss the progress made in the first year of the project and defines upcoming priorities and tasks in the second year.

Third communication and dissemination annual report

This report will outline the communication and dissemination activities of the LAMPAS project in its third year and will summarise progress and deliverables related to the project identity online communication internal communication and dissemination Finally the report will summarize the activities performed during the LAMPAS project

Publications

Non-peer reviewed articles (5)

Nuove tendenze grazie alle microlavorazioni laser

Author(s): Francesca Moglia
Published in: Applicazioni Laser, 2021, ISSN 1973-7238
Publisher: Publitec

New challenges for the laser micromachining community

Author(s): Francesca Moglia
Published in: PhotonicsViews, 2021, Page(s) 26-30, ISSN 2626-1308
Publisher: Wiley

Heating influence on hierarchical structures fabricated by direct laser interference patterning

Author(s): Nikolai Schröder; Fabian Nyenhuis; Robert Baumann; Lucinda Mulko; Thomas Kiedrowski; Johannes Albert L’huillier; Andrés Fabián Lasagni
Published in: Scientifc Reports, Issue 1, 2022, ISSN 2045-2322
Publisher: Nature Publishing Group
DOI: 10.1038/s41598-022-22368-w

Heat accumulation in metals under femtosecond irradiation: simulation and experimentation

Author(s): Liliana Cangueiro, David Bruneel, Thomas Kiedrowski, Nikolai Schroeder, Andrés Fabián Lasagni, and J. A. Ramos-de-Campos
Published in: PhotonicsViews, Issue Volume18, Issue 5, 2021, Page(s) 30-33, ISSN 2626-1294
Publisher: Wiley
DOI: 10.1002/phvs.202100056

Lasers and Surface Functionalization

Author(s): Francesca Moglia, Jose Pozo, Andrés F. Lasagni
Published in: PhotonicsViews, Issue 17/2, 2020, Page(s) 20-22, ISSN 2626-1294
Publisher: Wiley-VCH GmbH
DOI: 10.1002/phvs.202070207

Peer reviewed articles (5)

Monitoring the heat accumulation during fabrication of surface micropatterns on metallic surfaces using Direct Laser Interference Patterning

Author(s): N. Schröder, G. Vergara, B. Voisat, A. F. Lasagni
Published in: JLMN-Journal of Laser Micro/Nanoengineering, Issue Vol. 15, No. 2, 2020, ISSN 1880-0688
Publisher: Japan Laser Processing
DOI: 10.2961/jlmn.2020.02.2013

High throughput laser surface micro-structuring of polystyrene by combining direct laser interference patterning with polygon scanner technology

Author(s): Fabian Ränke; Robert Baumann; Bogdan Voisiat; Andrés Fabían Lasagni
Published in: Materials Letters: X, Issue 4, 2022, ISSN 0167-577X
Publisher: Elsevier BV
DOI: 10.5281/zenodo.7457915

New Approach for Monitoring a Direct Laser Interference Patterning Process Using a Combination of an Infrared Camera and a Diffraction Measurement System

Author(s): Nikolai Schröder, Sascha Teutoburg-Weiss, Germán Vergara, Andrés Fabián Lasagni
Published in: JLMN-Journal of Laser Micro/Nanoengineering, Issue Vol. 16, No. 2, 2021, ISSN 1880-0688
Publisher: Japan Laser Processing
DOI: 10.2961/jlmn.2021.02.2009

Approach for monitoring the topography of laser-induced periodic surface structures using a diffraction-based measurement method

Author(s): Nikolai Schröder, Christoph Fischer, Marcos Soldera, Felix Bouchard, Bogdan Voisiat, Andrés Fabián Lasagni
Published in: Materials Letters, Issue Volume 324, 2022, ISSN 0167-577X
Publisher: Elsevier BV
DOI: 10.1016/j.matlet.2022.132794

Ultrafast thin-disk multi-pass amplifier system providing 19 kW of average output power and pulse energies in the 10 mJ range at 1 ps of pulse duration for glass-cleaving applications

Author(s): Thomas Dietz, Michael Jenne, Dominik Bauer, Michael Scharun, Dirk Sutter, Alexander Killi
Published in: Optics Express, Issue 28/8, 2020, Page(s) 11415, ISSN 1094-4087
Publisher: Optical Society of America
DOI: 10.1364/oe.383926

Other (2)

Laser structuring of open-cell metal foams for micro-scale surface enlargement

Author(s): R. Baumann, T. Rauscher, C. I. Bernäcker, C. Zwahr, L. Röntzsch, T. Weißgärber, A. F. Lasagni
Published in: Journal of Laser Micro/Nanoengineering, 2020
Publisher: Japan Laser Processing Society

Kilowatt-class ultrashort pulse laser with mJ pulse energy based on disk laser multipass amplifier

Author(s): J. Dominik, M. Scharun, D. Bauer, A. Killi, T. Dekorsy
Published in: Proceedings of 9th International Congress on Laser Advanced Materials Processing, 2020
Publisher: Japan Laser Processing Society

Conference proceedings (1)

High Power and High Energy Ultrafast Disk Lasers for Industrial Applications

Author(s): Dirk H. Sutter, Thomas Dietz, Dominik Bauer, Raphael Scelle, Alexander Budnicki, Alexander Killi, Michael Jenne, Jonas Kleiner, Daniel Flamm, Marc Sailer, Malte Kumkar
Published in: Conference on Lasers and Electro-Optics, 2019, Page(s) JM3E.2, ISBN 978-1-943580-57-6
Publisher: OSA
DOI: 10.1364/cleo_at.2019.jm3e.2