Objectif
Opto-electronic devices are opening exciting new applications everyday. With new display options using pliable substrates such as plastic and flexible glass, OLEDs manufacturers are bringing a wide range of new applications in lighting (e.g. energy efficient lighting) and different type of displays. Similarly, with the emergence of thin-film technologies in the solar cells market, new applications ranging from installations on curved surfaces to building-integrated PV has become possible. However, to meet the industry requirements for mass production, including low cost, manufacturing volumes and efficiency, many challenges still need to be addressed. These challenges for OPV, OLED and CIGs are scale-up from laboratory to mass production, selection of efficient manufacturing processes, employing inspection, control and measurement techniques to improve yield, quality and time-to-market.
OLEDSOLAR aims to tackle these challenges by developinginnovative manufacturing processes for critical steps in the production of opto-electronic devices including OLEDs, OPVs and CIGs solar cells. The proposed activities include reconfigurable high yield (>10% improvement) processes to be scaled up, tested at pilot lines and implemented in production line for validation. A complete system of inspection, quality control, functional testing and measurements using advance system and sensors will be optimised in the project for efficient manufacturing of opto-electronics parts. Recycling and re-use strategies will be developed allowing resource efficiency and reduction of high value product wastes. Automation and advance processing software will be developed for overall control and monitoring of roll-to-roll (R2R) and sheet-to-sheet (S2S) manufacturing process.
During 36 months, a multidisciplinary team of leading RTOs and industries in this field will dedicate their resources and effort to perform proposed activities in 8 WPs and guarantee the maximum impact of OLEDSOLAR project.
Champ scientifique
Not validated
Not validated
- engineering and technologymechanical engineeringmanufacturing engineering
- natural sciencesphysical scienceselectromagnetism and electronicsoptoelectronics
- social sciencessociologyindustrial relationsautomation
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
02150 Espoo
Finlande
Voir sur la carte
Participants (16)
80686 Munchen
Voir sur la carte
2595 DA Den Haag
Voir sur la carte
08940 Madrid
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
97318 Kitzingen
Voir sur la carte
CB21 6AL Cambridge
Voir sur la carte
2000 Neuchatel
Voir sur la carte
Participation terminée
06766 Bitterfeld-Wolfen
Voir sur la carte
Participation terminée
5657 EB Eindhoven
Voir sur la carte
UB8 3PH Uxbridge
Voir sur la carte
08225 Terrassa
Voir sur la carte
41539 Dormagen
Voir sur la carte
TS90 8JF Middlesbrough
Voir sur la carte
8010 Graz
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
26504 Athina
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
12489 Berlin
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
5657 EB Eindhoven
Voir sur la carte