Medical Device Obligations Taskforce

Resultado final

Study on the use of extendedparameter life cycle acceleration with the described parameters and possible modellings

Nebulizer Verification The verification study report will contain the necessary data about aerosol size distribution dose and dose rate The report will be generated under GLP conditions M35

Generalized requirements for material-related tests for medical devices

The document is outlining a set of test requirements for materialrelated tests based on related standards and regulations Tests described in the deliverable are addressing concrete applications from a set of predefined application domains but are formulized in a general manner so that they can be transferredadapted to other domains easily M36

Test Bed verification

Verification and Validation Documentation Test Bed The Documents reports contain the results of the verification testing and validation procedure M26

Collection of Use-Cases and High-Level Design

Collection and documentation of relevant use cases and a high-level design that describe the scope of database and the Blockchain solution enabling the exchange of data on common parts/materials and test beds for conformity assessment of medical devices. (M15)

Vocabulary and Ontology

Definition and documentation of vocabularies and ontologies to enable data exchange and data analysis within and between databases in Version 10 M24

Local Probe Testing

Report on the local probe testing device together with a description of procedures and first data obtained with material libraries

Design & Process Prognosis

Software module predicting design and process dependent degradation processes

Publicaciones

Novel Test Bench for Inhaler Characterization Including Real-Time Determination of Output, Output Rate, and Liquid Water Content of Delivered Aerosols

Autores: Felix C. Wiegandt, Ulrich P. Froriep, Theodor Doll, Andreas Dietzel, Gerhard Pohlmann
Publicado en: Journal of Aerosol Medicine and Pulmonary Drug Delivery, 2020, ISSN 1941-2711
Editor: Mary Ann Liebert Inc.
DOI: 10.1089/jamp.2020.1611

Combinatorial Passivation Study in the Aluminium-Samarium System for Basic Property Mapping and Identification of Secondary Phase Influence

Autores: Yudai Yamamoto, Andrei Ionut Mardare, Jan Philipp Kollender, Cezarina Cela Mardare, Dominik Recktenwald, Koji Fushimi, Achim Walter Hassel
Publicado en: Journal of The Electrochemical Society, 2021, ISSN 0013-4651
Editor: Electrochemical Society, Inc.
DOI: 10.1149/1945-7111/abd1ed

A theoretical and experimental framework for the formation of mixed anodic films on combinatorial aluminium-cerium alloys

Autores: Khurram Shahzad, Shaukat Ali Lone, Cezarina Cela Mardare, Andrei Ionut Mardare, Achim Walter Hassel
Publicado en: Electrochimica Acta, 2020, ISSN 0013-4686
Editor: Pergamon Press Ltd.
DOI: 10.1016/2020.137173

Mechanical and tribological characterisations of PEG-based hydrogel coatings on XLPE surfaces

Autores: Dichu Xu; Terry Harvey; Janire Martínez; Eider Begiristain; Cristina Domínguez-Trujillo; Laura Sánchez-Abella; Martin Browne; Richard B. Cook
Publicado en: Crossref, Edición 10, 2023, ISSN 0043-1648
Editor: Elsevier BV
DOI: 10.1016/j.wear.2023.204699

Numerical Evaluation on Residual Thermal Stress-Induced Delamination at PDMS–Metal Interface of Neural Prostheses

Autores: Yuyang Mao, Ivan Pechenizkiy, Thomas Stieglitz, Theodor Doll
Publicado en: Micromachines, 2021, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12060669

Breath-Triggered Drug Release System for Preterm Neonates.

Autores: Felix C Wiegandt; Ulrich P. Froriep; Fabian Muller; Theodor Doll; Theodor Doll; Andreas Dietzel; Gerhard Pohlmann
Publicado en: Pharmaceutics, Edición 1, 2021, ISSN 1999-4923
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/pharmaceutics13050657

Laser-Facilitated Additive Manufacturing Enables Fabrication of Biocompatible Neural Devices

Autores: Ailke Behrens, Jan Stieghorst, Theodor Doll, Ulrich P. Froriep
Publicado en: Sensors, 2020, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20226614

The parallels between particle induced lung overload and particle induced periprosthetic osteolysis (PPOL)

Autores: Paul J. A. Borm
Publicado en: Open Research Europe, Edición 1, 2021, ISSN 2732-5121
Editor: Open Research Europe
DOI: 10.12688/openreseurope.13264.1

Mixed oxide growth on combinatorial aluminium–gadolinium alloys — a thermodynamic and first-principles approach

Autores: Khurram Shahzad, Cezarina Cela Mardare, Andrei Ionut Mardare, Achim Walter Hassel
Publicado en: Journal of Solid State Electrochemistry`, 2021, ISSN 1432-8488
Editor: Springer Verlag
DOI: 10.1007/s10008-021-05012-x

Computational Modeling of Diffusion-Based Delamination for Active Implantable Medical Devices

Autores: Minh-Hai Nguyen, Adrian Onken, Anika Wulff, Katharina Foremny, Patricia Torgau, Helmut Schütte, Sabine Hild, Theodor Doll
Publicado en: Bioengineering, 2023, ISSN 2306-5354
Editor: MDPI
DOI: 10.3390/bioengineering10050625

Predicting Corrosion Delamination Failure in Active Implantable Medical Devices: Analytical Model and Validation Strategy

Autores: Adrian Onken, Helmut Schütte, Anika Wulff, Heidi Lenz-Strauch, Michaela Kreienmeyer, Sabine Hild, Thomas Stieglitz, Stefan Gassmann, Thomas Lenarz, Theodor Doll
Publicado en: Bioengineering, 2021, ISSN 2306-5354
Editor: MDPI
DOI: 10.3390/bioengineering9010010

Privacy-preserving federated learning for residential short-term load forecasting

Autores: Joaquin Delgado Fernandez,Sergio Potenciano Menci,Chul Min Lee, Alexander Rieger, Gilbert Fridgen
Publicado en: Applied Energy, Edición 326, 2022, ISSN 0306-2619
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.apenergy.2022.119915

Impact of Femtosecond Laser Treatment Accompanied with Anodization of Titanium Alloy on Fibroblast Cell Growth

Autores: Shaukat Ali Lone, Martina Muck, Peter Fosodeder, Cezarina Cela Mardare, Camilo Florian, Agnes Weth, Jörg Krüger, Clemens Steinwender, Werner Baumgartner, Jörn Bonse, Johannes Heitz, Achim Walter Hassel
Publicado en: physica status solidi (a), Edición 217/13, 2020, Página(s) 1900838, ISSN 1862-6300
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.201900838

Detection of Breathing Movements of Preterm Neonates by Recording Their Abdominal Movements with a Time-of-Flight Camera.

Autores: Felix C Wiegandt; David Biegger; Jacob Friedemann Fast; Grzegorz Matusiak; Jan Mazela; Tobias Ortmaier; Theodor Doll; Andreas Dietzel; Bettina Bohnhorst; Gerhard Pohlmann
Publicado en: Pharmaceutics, 2021, ISSN 1999-4923
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/pharmaceutics13050721

Measuring the elastic modulus of soft biomaterials using nanoindentation

Autores: Dichu Xu, Terence Harvey, Eider Begiristain, Cristina Domínguez, Laura Sanchez-Abella, Martin Browne, Richard B. Cook
Publicado en: Journal of the Mechanical Behavior of Biomedical Materials, 2022, ISSN 1751-6161
Editor: Elsevier BV
DOI: 10.1016/j.jmbbm.2022.105329

Resultado final

Publicaciones

Compartir esta página

Descargar