Skip to main content
European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Regional Aircraft

Risultati finali

DMP for Scientific Paper with underlined data shown in it

Data Management Plan for Year 2019 GAM Amdt – Art. 29.2

Synthesis of Air Vehicle Technologies first assessment at A/C level (Linked to 2018-D_2.1.4-19)

Synthesis of Air Vehicle Technologies first assessment at A/C level (Linked to 2018-D_2.1.4-19)

Progress report on energy saving evaluations about innovative process to replace hard chrome surface treatments (Linked to 2018-D_4.2-01)
On-Board Systems Progress Status Report 2018 (Linked to 2018-D_2.3-04)
Summary Report on Assessment of aero new devices against WTT results (Linked to 2019-D_3.5.1-01)
Coordination Memo on completion of drawings release for CDR of Full-scale Morphing Winglet Ground Demonstrator (Linked to 2018-D_2.1.2-22)

Coordination Memo on completion of drawings release for CDR of Full-scale Morphing Winglet Ground Demonstrator (Linked to 2018-D_2.1.2-22)

Summary Report of Safety assesment (rear engine mounting installation) -- Loop 2 (Linked to 2018-D_1.1.1-48)
Summary Report of WL/WT PDR (Linked to 2018-D_2.4.2-01)

Summary Report of WL/WT PDR (Linked to 2018-D_2.4.2-01)

Summary Report of Innovative configuration performance assesment - Loop 2 (Linked to 2018-D_1.1.1-43) (Linked to 2018-D_1.1.1-43)
Coordination Memo about release of Technical documentation supporting CDR of Centre Wing Assembly (MTP) (Linked to 2018-D_3.5.4-03)
Summary report on FCS EMA Interface Control, Performance and Design Document for WL/WT (Linked to 2018-D_2.4.2-17)
Coordination Memo on completion of drawings release for CDR of Full-scale Innovative Wing Tip Ground Demonstrator (Linked to 2018-D_2.1.2-24)

Coordination Memo on completion of drawings release for CDR of Full-scale Innovative Wing Tip Ground Demonstrator (Linked to 2018-D_2.1.2-24)

"Coordination Memo ""Innovative configuration, engine dataset -- loop 2"" (Linked to 2018-D_1.1.2-03)"

"Coordination Memo ""Innovative configuration, engine dataset -- loop 2"" (Linked to 2018-D_1.1.2-03) "

Coordination Memo about release of Technical documentation supporting CDR for Central Wingbox (Linked to 2018-D_3.5.1-03)
Summary Report of IVHM framework description (Linked to 2018-D_2.2.3-07)
REG IADP Dissemination and Exploitation Management Plan (Linked to D_0.5-02)

Updating of REG IADP results dissemination and exploitation plan, register included

Dissemination and Exploitation Management Plan (Updating) (Linked to 2018-D_0.5-01)
Coordination Memo: OWB F/S, R/S and Ribs Drawings release (Linked to 2018-D_3.1.3-01)

Coordination Memo: OWB F/S, R/S and Ribs Drawings release (Linked to 2018-D_3.1.3-01)

REG IADP risks management plan (Linked to D_0.3-02)

Updating of REG IADP risks management plan, register included

"Coordination Memo ""E-LGS Final Design"" (Linked to 2018-D_2.3.2-12)"
Summary Report on Predictive geometries for the Assembly of FTB2 (Linked to 2018-D_3.5.4-01)
Coordination Memo: OWB Stiffened Panels drawings release (Linked to 2018-D_3.1.3-02)
Final Winglet/Wingtip EMA Specification Summary

Final Winglet/Wingtip EMA Specification (Linked to O2.4.1-07 and O2.4.1-08)

Coordination Memo abourt release of Technical documentation supporting CDR (Linked to 2018-D_3.5.3-01)
Coordination Memo: Release of the Innovative ECS Recirculation/Air Treatment System Specification (Linked to KO_2.3.3-07)

System specification input for CfP

Pubblicazioni

Design of a wing tip device for active maneuver and gust load alleviation

Autori: Federico Fonte, Francesco Toffol, Sergio Ricci
Pubblicato in: 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018, ISBN 978-1-62410-532-6
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1442

PARAMETRIC APPROACH TO OPERATING COSTS ESTIMATION FOR AN INNOVATIVE REGIONAL AIRCRAFT

Autori: M. Fioriti*, N. Viola*, D. Ferretto*, V. Vercella* and S. Cresto Aleina* *Department of Mechanical and Aerospace Engineering - Politecnico di Torino F. Nicolosi† and V. Cusati† †Department of Industrial Engineering – Aerospace division University of Naples Federico II
Pubblicato in: 2018
Editore: ICAS

Effects of riblets on the performances of a regional aircraft configuration in NLF conditions

Autori: Pietro Catalano, Donato de Rosa, Benedetto Mele, Renato Tognaccini, Frederic Moens
Pubblicato in: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1260

Design of a Leading Edge Morphing Based on Compliant Structures for a Twin-Prop Regional Aircraft

Autori: Sergio Ricci, Alessandro De Gaspari, Alessandro Gilardelli, Alessandro Airoldi
Pubblicato in: 2018 AIAA/AHS Adaptive Structures Conference, 2018, ISBN 978-1-62410-531-9
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1063

Hybrid guided wave based SHM system for composite structures for impact and delamination detection combining fiber Bragg grating sensing and piezoelectric patches

Autori: Ernesto Monaco, Natalino Daniele Boffa, Leandro Maio, Fabrizio Ricci, Edgar Mendoza, Tribikram Kundu, Vittorio Memmolo
Pubblicato in: Health Monitoring of Structural and Biological Systems XII, 2018, Pagina/e 12, ISBN 9781-510616974
Editore: SPIE
DOI: 10.1117/12.2297694

Performance evaluation and DOC Estimation of an Innovative Turboprop Configuration

Autori: Fabrizio Nicolosi, Salvatore Corcione, Vittorio Trifari, Vincenzo Cusati, Manuela Ruocco, Pierluigi Della Vecchia
Pubblicato in: 2018 Aviation Technology, Integration, and Operations Conference, 2018, ISBN 978-1-62410-556-2
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-3662

Thrust Extraction from Vorticity Fields in Steady and Unsteady Flows

Autori: Lorenzo Russo, Mario Ostieri, Renato Tognaccini
Pubblicato in: 2018 Applied Aerodynamics Conference, 2018, ISBN 978-1-62410-559-3
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-3967

The relation between vorticity-based and thermodynamic-based drag breakdown

Autori: L. L. Kang∗ , J. Z. Wu∗ , L. Russo† , R. Tognaccini†
Pubblicato in: 2018
Editore: TU Wien/ EUROMECH

“Aerodynamic design and analysis of an innovative regional turboprop configuration”

Autori: Fabrizio Nicolosi*, Salvatore Corcione*, Pierluigi Della Vecchia*, Vittorio Trifari*, Manuela Ruocco*, *University of Naples Federico II, Department of Industrial Engineering, Aerospace Division
Pubblicato in: 31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018,, 2018
Editore: ICAS

Multi-Modal Morphing Wing Flaps for Next Generation Green Regional Aircraft: The CleanSky Challenge

Autori: Rosario Pecora
Pubblicato in: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Pagina/e V001T04A018, ISBN 978-0-7918-5194-4
Editore: ASME
DOI: 10.1115/smasis2018-8108

Control strategy of an electrically actuated morphing flap for the next generation green regional aircraft

Autori: Maurizio Arena, Maria Chiara Noviello, Francesco Rea, Francesco Amoroso, Rosario Pecora
Pubblicato in: Active and Passive Smart Structures and Integrated Systems XII, 2018, Pagina/e 19, ISBN 9781-510616875
Editore: SPIE
DOI: 10.1117/12.2296424

Feasibility studies for the installation of Plasma Synthetic Jet Actuators on the skin of a morphing wing flap

Autori: Maurizio Arena, Matteo Chiatto, Francesco Amoroso, Rosario Pecora, Luigi de Luca
Pubblicato in: Active and Passive Smart Structures and Integrated Systems XII, 2018, Pagina/e 21, ISBN 9781-510616875
Editore: SPIE
DOI: 10.1117/12.2300512

Aeroelastic stability analysis of a large civil aircraft equipped with morphing winglets and adaptive flap tabs

Autori: Rosario Pecora, Francesco Amoroso, Ignazio Dimino, Antonio Concilio, Maria Chiara Noviello
Pubblicato in: Active and Passive Smart Structures and Integrated Systems XII, 2018, Pagina/e 20, ISBN 9781-510616875
Editore: SPIE
DOI: 10.1117/12.2300173

Preliminary Assessment of Morphing Winglet and Flap Tabs Influence on the Aeroelastic Stability of Next Generation Regional Aircraft

Autori: Maria Chiara Noviello, Ignazio Dimino, Francesco Amoroso, Antonio Concilio, Rosario Pecora
Pubblicato in: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Pagina/e V001T04A020, ISBN 978-0-7918-5194-4
Editore: ASME
DOI: 10.1115/smasis2018-8138

Technological demonstration of an adaptive aileron system

Autori: Gianluca Amendola, Ignazio Dimino, Rosario Pecora, Francesco Amoroso, Leonardo Lecce, Antonio Concilio
Pubblicato in: Bioinspiration, Biomimetics, and Bioreplication VIII, 2018, Pagina/e 3, ISBN 9781-510616837
Editore: SPIE
DOI: 10.1117/12.2297083

AIRGREEN2 - Clean Sky 2 Programme: Adaptive Wing Technology Maturation, Challenges and Perspectives

Autori: Salvatore Ameduri, Antonio Concilio, Ignazio Dimino, Rosario Pecora, Sergio Ricci
Pubblicato in: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Pagina/e V001T04A023, ISBN 978-0-7918-5194-4
Editore: ASME
DOI: 10.1115/smasis2018-8235

Piezo-driven and Plasma Synthetic Jet Actuators. A comparative investigation

Autori: Chiatto M., Palumbo A., De Luca, L
Pubblicato in: 2018
Editore: GWFMD

Structural Design of a Multifunctional Morphing Fowler Flap for a Twin-Prop Regional Aircraft

Autori: Francesco Rea, Francesco Amoroso, Rosario Pecora, Maria Chiara Noviello, Maurizio Arena
Pubblicato in: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Pagina/e V001T04A003, ISBN 978-0-7918-5194-4
Editore: ASME
DOI: 10.1115/smasis2018-7937

Design of an Adaptive Twist Trailing Edge for Large Commercial Aircraft Applications

Autori: Francesco Rea, Francesco Amoroso, Rosario Pecora, Markus Kintscher
Pubblicato in: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Pagina/e V001T04A004, ISBN 978-0-7918-5194-4
Editore: ASME
DOI: 10.1115/smasis2018-7939

Design and aerodynamic analysis of a regional turboprop innovative configuration

Autori: Nicolosi F., Corcione S., Della Vecchia P., Trifari V., Ruocco M., De Marco A.
Pubblicato in: Paper 893, 6th CEAS Conference , CEAS2017,, 2017, ISBN 978-973-0-25597-3
Editore: CEAS

Developing of a Simscape Multibody Contact Library for Gothic Arc Ball Screws: A Three-Dimensional Model for Internal Sphere/Grooves Interactions

Autori: Antonio Carlo Bertolino, Giovanni Jacazio, Stefano Mauro, Massimo Sorli
Pubblicato in: Volume 4: Dynamics, Vibration, and Control, 2019, ISBN 978-0-7918-5941-4
Editore: American Society of Mechanical Engineers
DOI: 10.1115/imece2019-10709

Robust Design of a Test Bench for PHM Study of Ball Screw Drives

Autori: A. C. Bertolino, A. De Martin, G. Jacazio, S. Mauro, M. Sorli
Pubblicato in: Volume 1: Advances in Aerospace Technology, 2019, ISBN 978-0-7918-5936-0
Editore: American Society of Mechanical Engineers
DOI: 10.1115/imece2019-10713

Electrical Flight Control for load control and alleviation system

Autori: G.Pozzuto, A. De Martin, G.Pispola, M. Palmieri, F.Gallorini
Pubblicato in: MEA2019 Conferences, 2019
Editore: MEA2019 Conferences

“Surrogate Models in flap design of Clean Sky 2”

Autori: S.de Lucas
Pubblicato in: EUROGEN 2019 Portugal, Numero Bi-yearly, 2019
Editore: EUROGEN: Evolutionary and Deterministic Computing for Industrial Applications within EUCCOMAS

"“Inclusion of structure and loads objectives in the definition of probability for Flight Control System failures in the frame of FTB#2 Cleansky2”"

Autori: M.Rodriguez
Pubblicato in: EuCASS 2019 Spain, Numero Bi-yearly, 2019
Editore: EuCASS: 8th European Conference for Aeronautics and Space Sciences

Design Guidelines for High Capacity Innovative Regional Turboprop Aircraft

Autori: Fabrizio Nicolosi, Salvatore Corcione, Vittorio Trifari, Pierluigi Della Vecchia, Agostino De Marco
Pubblicato in: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-0256

Green regional aircraft gust response

Autori: Sylvie Dequand
Pubblicato in: Greener Aviation COnference 2016, 2016
Editore: 3AF

Preliminary Design and performance of a morphing winglet for green regional A/C

Autori: Ignazio Dimino
Pubblicato in: Greener Aviation COnference 2016, 2016
Editore: 3AF

Research activities of ONERA on laminar wings in the framework of the JTI CLean Sky: transition prediction

Autori: Maxime Forte
Pubblicato in: Greener Aviation COnference 2016, 2016
Editore: 3AF

The ASTIB project

Autori: Prof. G. Jacazio
Pubblicato in: 2017
Editore: SAE - Society of Automotive Engineers

Experimental shape reconstruction of a morphing wing trailing edge in simulated operative condition

Autori: ,F. Amoroso F. Rea, M. Arena, M. C. Noviello R. Pecora, (UNINA) I. Dimino (CIRA)
Pubblicato in: 2017
Editore: ICMAE

Improving Aeroelastic model accuracy and affordability by exploiting wind tunnel test results

Autori: M.Di Gifico V.Vaccaro (LDO VEL)
Pubblicato in: 2017
Editore: Department of Aerospace Science and Technology of Politecnico di Milano

Design of aeroelastic wingtip devices for wing load alleviation

Autori: F. Toffol F. Fonte Prof S Ricci (POLIMI)
Pubblicato in: 2017
Editore: Department of Aerospace Science and Technology of Politecnico di Milano

Increased Order Aeroservoelastic Modeling in Practice

Autori: Reyes M. Climen H Karpel M (CASA)
Pubblicato in: 2017
Editore: Department of Aerospace Science and Technology of Politecnico di Milano

Preliminary Design of the Actuation Mechanism of a Morphing Winglet for Green Regional A/C

Autori: I. Dimino, G. Amendola, A. Concilio, G. Andreutti (UNINA) G. Pispola, F. Perni (UMBRA)
Pubblicato in: 2017
Editore: ICAST

Conceptual Design of a Morphing Wingle

Autori: G. Amendola, I. Dimino, A. Concilio, G. Andreutti (CIRA) R. Pecora, M. Lo Cascio (UNINA)
Pubblicato in: 2017
Editore: ICMAE

Investigation of a Plasma Synthetic Jet Actuator for Flow Control.

Autori: M. Chiatto, L. de Luca (CIRA)
Pubblicato in: 2017
Editore: EFMC11

Numerical and Experimental Frequency Response of Plasma Synthetic Jet Actuator

Autori: M. Chiatto, L. de Luca (CIRA)
Pubblicato in: 2017
Editore: AIAA

Influence of Riblets and Laminar Flow Control on the Performance of a Regional Aircraft Configuration

Autori: P. Catalano, D. de Rosa (CIRA) Proff. B. Mele, R. Tognaccini, (UNINA) F. Moens (ONERA)
Pubblicato in: 2017
Editore: Prof. M. Quadrio (POLIMI) Prof. P. Luchini (UNISA) Prof. Kwing-So Choi (U-NOT)

Modelling drag reduction devices by slip length at high Reynolds number

Autori: Proff. B. Mele, R. Tognaccini (UNINA)
Pubblicato in: 2017
Editore: Prof. M. Quadrio (POLIMI) Prof. P. Luchini (UNISA) Prof. Kwing-So Choi (U-NOT)

Performance characteristics of plasma synthetic jets actuator

Autori: M. Chiatto, L. de Luca (CIRA)
Pubblicato in: 2017
Editore: AIMETA

Slip length based boundary condition for modeling drag reduction devices

Autori: Proff. B. Mele, R. Tognaccini (UNINA)
Pubblicato in: 2017
Editore: AIAA Aviation 2017

ICAS - 29th Congress of the International Council of the Aeronautical Sciences ADAPTIVE CONTROLLER DESIGN FOR GUST LOAD ALLEVIATION Politecnico di Torino

Autori: PoliTO
Pubblicato in: 2015
Editore: ICAS

CS - Structural design of high lift and load control and alleviation devices for a natural laminar flow wing ASAM project PLM

Autori: PLM
Pubblicato in: 2015
Editore: PLM

Politecnico di Torino, Italy - 23rd Conference of the Italian Association of Aeronautics and Astronautics LOAD CONTROL AND ALLEVIATION TECHNOLOGY FOR APPLICATION TO FUTURE GREEN REGIONAL AIRCRAFT Politecnico di Torino

Autori: PoliTO, FNM VEL
Pubblicato in: 2015
Editore: PoliTO, FNM VEL

Manchester, UK 10th AIAA/CEAS Aeroacoustics Conference, No. AIAA-2004-2955, Manchester, UK, 2004. WENEMOR: Wind Tunnel Tests for the Evaluation of the Installation Effects of Noise Emissions of an Open Rotor Advanced Regional Aircraft

Autori: Trinity College Dublin, Pininfarina S.p.A. Italy, Teknosud S.R.L Italy, Univ.Polit. delle Marche Italy, Paragon SA Greece, Eurotech, Italy, FNM VEL
Pubblicato in: 2015
Editore: AIAA/CEAS

Investigation of manufacturing effects by strength assessment, NDI and guided waves based SHM in composite plates reinforced with bonded stringers

Autori: Natalino D. Boffa, Ernesto Monaco, Fabrizio Ricci, F. Amoroso
Pubblicato in: Health Monitoring of Structural and Biological Systems XIII, Numero PROCEEDINGS VOLUME 10972, 2019, Pagina/e 31, ISBN 9781-510626003
Editore: SPIE
DOI: 10.1117/12.2516639

Hybrid structural health monitoring on a composite plate manufactured with automatic fibers placement including embedded fiber Bragg gratings and bonded piezoelectric patches

Autori: Natalino D. Boffa, Ernesto Monaco, Fabrizio Ricci, Leonardo Lecce, Marco Barile, Vittorio Memmolo
Pubblicato in: Health Monitoring of Structural and Biological Systems XIII, 2019, Pagina/e 27, ISBN 9781-510626003
Editore: SPIE
DOI: 10.1117/12.2516537

A SIMULATION METHODOLOGY FOR THE DESIGN OF TRAILING-EDGE FLAP DEPLOYMENT MECHANISM

Autori: A. E. ÖNGÜT, E. ALLEGAERT, Y. LEMMENS (SISW)
Pubblicato in: CAASE18: The Conference on Advancing Analysis & Simulation in Engineering, 2018, Pagina/e all pages
Editore: CAASE18

Aerodynamic Design, analysis and optimization of an innovative regional aircraft

Autori: F. Nicolosi, S. Corcione, P. Della Vecchia, A. De Marco, M. Ruocco, V. Trifari, V. Cusati (UNINA)
Pubblicato in: ICAS 2018, 2018
Editore: ICAS 2018

Real Time Loading Test Rig for Flight Control Actuators Under PHM Experimentation

Autori: P. Chiavaroli, A. De Martin, G. Evangelista, G. Jacazio, M. Sorli
Pubblicato in: Volume 1: Advances in Aerospace Technology, 2018, ISBN 978-0-7918-5200-2
Editore: American Society of Mechanical Engineers
DOI: 10.1115/imece2018-86967

Drag reduction of three-dimensional riblets on a at plate turbulent boundary layer

Autori: Cafiero, Gioacchino; Iuso, Gaetano (POLITO)
Pubblicato in: 72nd Annual Meeting of the American Physical Society - Division of Fluid Dynamics, 2019
Editore: apsdfd2019

Composite reinforced plates built by co-infusion or secondary bonding techniques: analysis of the effects of manufacturing approach on compression behaviour by mechanical tests, NDI and guided waves based SHM”

Autori: Monaco, E., Boffa, N.D., Ricci, F.
Pubblicato in: AIDAA 2019 Congress, 2019
Editore: A.I.D.A.A. – Associazione Italiana di Aeronautica e Astronautica

Flutter analysis of a large civil aircraft in case of free-plays and internal failures of morphing wing flaps mechanical systems

Autori: Rosario Pecora, Francesco Amoroso, Ignazio Dimino, Antonio Concilio
Pubblicato in: Active and Passive Smart Structures and Integrated Systems XIII, 2019, Pagina/e 31, ISBN 9781-510625907
Editore: SPIE
DOI: 10.1117/12.2514251

"""Morphing wing flaps for large civil transportation aircraft: the evolution of a smart technology across the cleansky program"""

Autori: Pecora, R.,
Pubblicato in: Smart Aircraft Symposium (invited lecture) held at Xi'An Jiaotong University,, 2017
Editore: ELSEVIER

Morphing wing flaps for large civil aircraft: the CleanSky-GRA challenge

Autori: R. Pecora, F. Amoroso
Pubblicato in: AIDAA 2019 Congress, 2019
Editore: AIDAA

Structural design of a three-modal camber morphing wing flap for large civil aircraft applications

Autori: F. Rea, F. Amoroso, R. Pecora,
Pubblicato in: AIDAA 2019 Congress, 2019
Editore: AIDAA

“Aeroelastic stability assessment of a CS-25 category aircraft equipped with morphing wing devices”

Autori: M.C. Noviello, F. Amoroso, R. Pecora, I. Dimino, A. Concilio,
Pubblicato in: AIDAA 2019 Congress, 2019
Editore: AIDAA

“ACSIS (Actuation, Control & Sensing Integrated System) for morphing structures”

Autori: M. Arena, F. Amoroso, R. Pecora,
Pubblicato in: AIDAA 2019 Congress, 2019
Editore: AIDAA

Aerodynamic Force Breakdown Based on Vortex Force Theory

Autori: Linlin Kang, Lorenzo Russo, Renato Tognaccini, Jiezhi Wu, Weidong Su
Pubblicato in: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-2122

"""High Lift Aerodynamic characteristics of a Three Lifting Surfaces Turboprop Aircraft"""

Autori: S. Corcione, P. Della Vecchia, F. Nicolosi, D. Ciliberti and V. Cusati,
Pubblicato in: AIAA Aviation 2019 Forum, (AIAA 2019-2884),, 2019
Editore: AIAA Aviation 2019 FORUM eISBN: 978-1-62410-589-0

“Longitudinal stability issues including propulsive effects on an innovative commercial propeller-driven aircraft”

Autori: S. Corcione, P. Della Vecchia, F. Nicolosi, D. Ciliberti and V. Cusati,
Pubblicato in: AIAA Aviation 2019 Forum, (AIAA 2019-2882), 2019
Editore: AIAA Aviation

“Directional stability issues of a three lifting surface aircraft”,

Autori: S. Corcione, V. Cusati, F. Nicolosi, D. Ciliberti,
Pubblicato in: XXV AIDAA Congress, 2019
Editore: AIDAA

Slip Length–Based Boundary Condition for Modeling Drag Reduction Devices

Autori: Benedetto Mele, Renato Tognaccini
Pubblicato in: AIAA Journal, Numero 56/9, 2018, Pagina/e 3478-3490, ISSN 0001-1452
Editore: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j056589

A Calibrated Lumped Element Model for the Prediction of PSJ Actuator Efficiency Performance

Autori: Matteo Chiatto, Andrea Palumbo, Luigi de Luca
Pubblicato in: Actuators, Numero 7/1, 2018, Pagina/e 10, ISSN 2076-0825
Editore: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7010010

Description of Position Control Laws for Functionality Test of a Bi-modal Morphing Flap

Autori: Noviello M.C., Rea F., Arena M., Pecora R., Amoroso F.
Pubblicato in: International Journal of Mechanical Engineering and Robotics Research, 2019, ISSN 2278-0149
Editore: IJMERR
DOI: 10.18178/ijmerr.8.1.31-40

Exploitation of a Multifunctional Twistable Wing Trailing-Edge for Performance Improvement of a Turboprop 90-Seats Regional Aircraft

Autori: Francesco Rea, Francesco Amoroso, Rosario Pecora, Frederic Moens
Pubblicato in: Aerospace, Numero 5/4, 2018, Pagina/e 122, ISSN 2226-4310
Editore: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/aerospace5040122

Preliminary Design Process for an Adaptive Winglet

Autori: Gianluca Amendola, Ignazio Dimino, Antonio Concilio, Giovanni Andreutti, Rosario Pecora, Marco Lo Cascio
Pubblicato in: International Journal of Mechanical Engineering and Robotics Research, Numero 6/6, 2017, Pagina/e 83-92, ISSN 2278-0149
Editore: IJMERR
DOI: 10.18178/ijmerr.7.1.83-92

Measurements versus Numerical Simulations for Slotted Synthetic Jet Actuator

Autori: Andrea Palumbo, Matteo Chiatto, Luigi de Luca
Pubblicato in: Actuators, Numero 7/3, 2018, Pagina/e 59, ISSN 2076-0825
Editore: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7030059

Electro-Actuation System Strategy for a Morphing Flap

Autori: Maurizio Arena, Francesco Amoroso, Rosario Pecora, Salvatore Ameduri
Pubblicato in: Aerospace, Numero 6/1, 2019, Pagina/e 1, ISSN 2226-4310
Editore: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/aerospace6010001

Plasma Synthetic Jet Actuators for Active Flow Control

Autori: Haohua Zong, Matteo Chiatto, Marios Kotsonis, Luigi de Luca
Pubblicato in: Actuators, Numero 7/4, 2018, Pagina/e 77, ISSN 2076-0825
Editore: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7040077

Numerical and experimental validation of a full scale servo-actuated morphing aileron model

Autori: Maurizio Arena, Francesco Amoroso, Rosario Pecora, Gianluca Amendola, Ignazio Dimino, Antonio Concilio
Pubblicato in: Smart Materials and Structures, Numero 27/10, 2018, Pagina/e 105034, ISSN 0964-1726
Editore: Institute of Physics Publishing
DOI: 10.1088/1361-665x/aad7d9

Numerical and experimental characterization of a double-orifice synthetic jet actuator

Autori: Matteo Chiatto, Francesco Capuano, Luigi de Luca
Pubblicato in: Meccanica, Numero 53/11-12, 2018, Pagina/e 2883-2896, ISSN 0025-6455
Editore: Kluwer Academic Publishers
DOI: 10.1007/s11012-018-0866-7

Application of laser Doppler vibrometry for ultrasonic velocity assessment in a composite panel with defect

Autori: L. Maio, F. Ricci, V. Memmolo, E. Monaco, N.D. Boffa
Pubblicato in: Composite Structures, Numero 184, 2018, Pagina/e 1030-1039, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2017.10.059

Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites

Autori: V. Memmolo, Y.J. Park, M. Lilov, E. Monaco, F. Ricci
Pubblicato in: Composite Structures, Numero 202, 2018, Pagina/e 1229-1238, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2018.05.125

Aero-servo-elastic design of a morphing wing trailing edge system for enhanced cruise performance

Autori: Maurizio Arena, Antonio Concilio, Rosario Pecora
Pubblicato in: Aerospace Science and Technology, Numero 86, 2019, Pagina/e 215-235, ISSN 1270-9638
Editore: Elsevier BV
DOI: 10.1016/j.ast.2019.01.020

Guided wave propagation and scattering for structural health monitoring of stiffened composites

Autori: V. Memmolo, E. Monaco, N.D. Boffa, L. Maio, F. Ricci
Pubblicato in: Composite Structures, Numero 184, 2018, Pagina/e 568-580, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2017.09.067

Flutter Clearance Investigation of Camber-Morphing Aileron Tailored for a Regional Aircraft

Autori: Maurizio Arena, Rita Palumbo, Rosario Pecora, Francesco Amoroso, Gianluca Amendola, Ignazio Dimino
Pubblicato in: Journal of Aerospace Engineering, Numero 32/2, 2019, Pagina/e 04018146, ISSN 0893-1321
Editore: American Society of Civil Engineers
DOI: 10.1061/(asce)as.1943-5525.0000973

Design of a PHM system for electro-mechanical flight controls: a roadmap from preliminary analyses to iron-bird validation

Autori: Andrea De Martin, Giovanni Jacazio, Massimo Sorli
Pubblicato in: MATEC Web of Conferences, Numero 304, 2019, Pagina/e 04018, ISSN 2261-236X
Editore: EDP sciences
DOI: 10.1051/matecconf/201930404018

Lumped parameters modelling of the EMAs’ ball screw drive with special consideration to ball/grooves interactions to support model-based health monitoring

Autori: Antonio Carlo Bertolino, Massimo Sorli, Giovanni Jacazio, Stefano Mauro
Pubblicato in: Mechanism and Machine Theory, Numero 137, 2019, Pagina/e 188-210, ISSN 0094-114X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.mechmachtheory.2019.03.022

Prediction of the acoustic shielding by aircraft empennage for contra-rotating open rotors

Autori: L Sanders, D-C Mincu, PL Vitagliano, M Minervino, J Kennedy, G Bennett
Pubblicato in: International Journal of Aeroacoustics, Numero 16/7-8, 2017, Pagina/e 626-648, ISSN 1475-472X
Editore: Multi-Science Publishing Co. Ltd
DOI: 10.1177/1475472x17734334

Aerodynamic Shape Design and Validation of an Advanced High-Lift Device for a Regional Aircraft with Morphing Droop Nose

Autori: Alessandro De Gaspari, Frédéric Moens
Pubblicato in: International Journal of Aerospace Engineering, Numero 2019, 2019, Pagina/e 1-21, ISSN 1687-5966
Editore: Hindawi Publishing Corporation
DOI: 10.1155/2019/7982168

Powered wind tunnel tests setup of the IRON innovative turboprop aircraft

Autori: Danilo Ciliberti, Vincenzo Cusati, Pierluigi Della Vecchia, Salvatore Corcione, Fabrizio Nicolosi
Pubblicato in: MATEC Web of Conferences, Numero 304, 2019, Pagina/e 02022, ISSN 2261-236X
Editore: MATEC
DOI: 10.1051/matecconf/201930402022

Feasibility study of innovative regional turboprop: an overview of the European project IRON

Autori: Salvatore Corcione, Vittorio Trifari, Fabrizio Nicolosi, Vincenzo Cusati, Danilo Ciliberti, Pierluigi Della Vecchia
Pubblicato in: MATEC Web of Conferences, Numero 304, 2019, Pagina/e 03014, ISSN 2261-236X
Editore: MATEC
DOI: 10.1051/matecconf/201930403014

Understanding of structural and acoustic behaviour of stiffened composite panels for fuselage applications FNM VEL

Autori: FNM VEL
Pubblicato in: 2015
Editore: FNM VEL

"""CS - Composite Fuselage One Piece Barrel (OPB): Integrated Development and Prototype Demonstration AFLOG project OMI"""

Autori: OMI
Pubblicato in: 2015
Editore: OMI

Optical fibres and piezoelectric technologies applications in flight and ground demonstrations. Fraunhofer

Autori: Fraunhofer
Pubblicato in: 2015
Editore: Fraunhofer

Composite Platform SHM design from flight and ground demonstration requirements

Autori: FNM VEL
Pubblicato in: 2015
Editore: FNM VEL

"""CS - Design Considerations of an Autonomous Wireless Sensor Network for Structural Health Monitoring in Aircraft WILDCRAFT project CEIT """

Autori: CEIT
Pubblicato in: 2015
Editore: CEIT

Structural Health Monitoring of a composite stiffened panel FNM VEL

Autori: FNM VEL
Pubblicato in: 2015
Editore: FNM VEL

CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autori: cira
Pubblicato in: 2015
Editore: CIRA

Full-scale Wind Tunnel Demonstration of Nose Landing Gear Low-Noise Technologies for Future Regional Aircraft “ALLEGRA” project Trinity College Dublin

Autori: Trinity College Dublin
Pubblicato in: 2015
Editore: Trinity College Dublin

Brussels - Clean Sky General Forum - CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autori: CIRA
Pubblicato in: 2015
Editore: CIRA

CS - ETRIOLLA Actuation and measurement technologies for WTT of the innovative regional transonic wing ETRIOLLA project IBK Innovation GmbH

Autori: IBK
Pubblicato in: 2015
Editore: IBK

London - Droop Nose Technology toward Future Green Regional Aircraft: Development and Prototype Demonstration Fraunhofer

Autori: Fraunhofer
Pubblicato in: 2015
Editore: Fraunhofer

Design, development and manufacturing of an electro-mechanical actuator and test rig for AiRcrafts Main LandIng Gear AcTuation systems ARMLIGhT project CESA Spain

Autori: CESA
Pubblicato in: 2015
Editore: CESA

Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA, Italy, INCAS, Romania, FOI, Chalmers University of technology, Sweden and ONERA, France

Autori: CIRA, INCAS, FOI, Chalmers University of technology, ONERA
Pubblicato in: 2015
Editore: CIRA, INCAS, FOI, Chalmers University of technology, ONERA

CS - ADAVES advanced avionics equipment simulation ADAVES project

Autori: EDISOFT-EMPRESA DE SERVICOS E DESENVOLVIMENTO DE SOFTWARE SA
Pubblicato in: 2015
Editore: EDISOFT-EMPRESA DE SERVICOS E DESENVOLVIMENTO DE SOFTWARE SA

An Electrical POwer Center for Aeronautical Loads “EPOCAL” project Seconda Università degli Studi di Napoli

Autori: Seconda Università degli studi di Napoli
Pubblicato in: 2015
Editore: Seconda Università degli studi di Napoli

Future Green Regional A/C Gust Load Alleviation control system experimental validation through innovative WT tests GLAMOUR project Politecnico di Milano

Autori: Politecnico di Milano
Pubblicato in: 2014, 2015
Editore: Politecnico di Milano

Future Green Regional A/C Transonic Laminar Wing experimental assessment Through innovative WT tests Drag passive reduction by riblets technology: Results from GRA ITD studies and prospects for further achievements Università di Napoli, Politecnico di Torino

Autori: "Università di Napoli ""Federico II"", Politecnico di Torino"
Pubblicato in: 2015
Editore: "Università di Napoli ""Federico II"", Politecnico di Torino"

"""Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests ETRIOLLA project IBK """

Autori: IBK
Pubblicato in: 2015
Editore: IBK

Aerodynamic Design Based on Numerical Optimization of a Green ATF Regional Aircraft Piaggio Aerospace, FNM VEL

Autori: Piaggio Aerospace, FNM VEL
Pubblicato in: 2015
Editore: Piaggio Aerospace, FNM VEL

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Landing Gear Aiframe Noise Reduction Technology Development for Future Green Regional Aircraft CIRA

Autori: CIRA
Pubblicato in: 2015
Editore: CIRA

Optimization of Morphing Wings for Improved Environmental Performance MAWS project University of Bristol

Autori: University of Bristol
Pubblicato in: 2014, 2015
Editore: University of Bristol

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Wind Tunnel Test and CFD/CAA Analysis on a Scaled Model of a Nose Landing Gear Fraunhofer

Autori: Fraunhofer
Pubblicato in: 2014, 2015
Editore: Fraunhofer

Natural Laminar Flow Transonic Wing Design applied to Future Innovative Green Regional Aircraft

Autori: ONERA, FNM VEL, CIRA
Pubblicato in: 2015
Editore: ONERA, FNM VEL, CIRA

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Load Control and Alleviation Technology for application to future Green Regional Aircr aft FNM VEL

Autori: FNM VEL
Pubblicato in: 2014, 2015
Editore: FNM VEL

Innovative Electrical Energy Management strategy for Future Regional All-Electric Aircraft FNM VEL

Autori: FNM VEL
Pubblicato in: 2015
Editore: FNM VEL

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Design, Development and Test of Synthetic Jets Actuators for Future Green Regional Aircraft Fraunhofer

Autori: Fraunhofer
Pubblicato in: 2015
Editore: Fraunhofer

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Smart Droop Nose for application to Laminar Wing of future Green Regional A/C Fraunhofer

Autori: Fraunhofer
Pubblicato in: 2015
Editore: Fraunhofer

ATR : Green FMS functions for a green Aircraft

Autori: Thales Avionics, ATR
Pubblicato in: 2015
Editore: Thales Avionics, ATR

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Aiframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autori: CIRA
Pubblicato in: 2015
Editore: CIRA

A SIMULATION METHODOLOGY FOR THE DESIGN OF TRAILING-EDGE FLAP DEPLOYMENT MECHANISM

Autori: A. E. ÖNGÜT, E. ALLEGAERT, Y. LEMMENS (SISW)
Pubblicato in: CAASE18, The Conference on Advancing Analysis & Simulation in Engineering, 2018
Editore: CAASE18

Comprehensive Robust Adaptive Controller for Gust Load Alleviation

Autori: Elisa Capello,* Giorgio Guglieri, and Fulvia Quagliotti
Pubblicato in: THE SCIENTIFIC WORLD JOURNAL, 2015, ISSN 1537-744X
Editore: ScientificWorld, Inc.

Diritti di proprietà intellettuale

METHODS OF MANUFACTURING PANELS OF COMPOSITE MATERIAL REINFORCED WITH CLOSED-SECTION STRINGERS

Numero candidatura/pubblicazione: 16 177404
Data: 2016-07-01
Candidato/i: LEONARDO - SOCIETA PER AZIONI

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile