Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Regional Aircraft

Resultado final

DMP for Scientific Paper with underlined data shown in it

Data Management Plan for Year 2019 GAM Amdt – Art. 29.2

Synthesis of Air Vehicle Technologies first assessment at A/C level (Linked to 2018-D_2.1.4-19)

Synthesis of Air Vehicle Technologies first assessment at A/C level (Linked to 2018-D_2.1.4-19)

Progress report on energy saving evaluations about innovative process to replace hard chrome surface treatments (Linked to 2018-D_4.2-01)
On-Board Systems Progress Status Report 2018 (Linked to 2018-D_2.3-04)
Summary Report on Assessment of aero new devices against WTT results (Linked to 2019-D_3.5.1-01)
Coordination Memo on completion of drawings release for CDR of Full-scale Morphing Winglet Ground Demonstrator (Linked to 2018-D_2.1.2-22)

Coordination Memo on completion of drawings release for CDR of Full-scale Morphing Winglet Ground Demonstrator (Linked to 2018-D_2.1.2-22)

Summary Report of Safety assesment (rear engine mounting installation) -- Loop 2 (Linked to 2018-D_1.1.1-48)
Summary Report of WL/WT PDR (Linked to 2018-D_2.4.2-01)

Summary Report of WL/WT PDR (Linked to 2018-D_2.4.2-01)

Summary Report of Innovative configuration performance assesment - Loop 2 (Linked to 2018-D_1.1.1-43) (Linked to 2018-D_1.1.1-43)
Coordination Memo about release of Technical documentation supporting CDR of Centre Wing Assembly (MTP) (Linked to 2018-D_3.5.4-03)
Summary report on FCS EMA Interface Control, Performance and Design Document for WL/WT (Linked to 2018-D_2.4.2-17)
Coordination Memo on completion of drawings release for CDR of Full-scale Innovative Wing Tip Ground Demonstrator (Linked to 2018-D_2.1.2-24)

Coordination Memo on completion of drawings release for CDR of Full-scale Innovative Wing Tip Ground Demonstrator (Linked to 2018-D_2.1.2-24)

"Coordination Memo ""Innovative configuration, engine dataset -- loop 2"" (Linked to 2018-D_1.1.2-03)"

"Coordination Memo ""Innovative configuration, engine dataset -- loop 2"" (Linked to 2018-D_1.1.2-03) "

Coordination Memo about release of Technical documentation supporting CDR for Central Wingbox (Linked to 2018-D_3.5.1-03)
Summary Report of IVHM framework description (Linked to 2018-D_2.2.3-07)
REG IADP Dissemination and Exploitation Management Plan (Linked to D_0.5-02)

Updating of REG IADP results dissemination and exploitation plan, register included

Dissemination and Exploitation Management Plan (Updating) (Linked to 2018-D_0.5-01)
Coordination Memo: OWB F/S, R/S and Ribs Drawings release (Linked to 2018-D_3.1.3-01)

Coordination Memo: OWB F/S, R/S and Ribs Drawings release (Linked to 2018-D_3.1.3-01)

REG IADP risks management plan (Linked to D_0.3-02)

Updating of REG IADP risks management plan, register included

"Coordination Memo ""E-LGS Final Design"" (Linked to 2018-D_2.3.2-12)"
Summary Report on Predictive geometries for the Assembly of FTB2 (Linked to 2018-D_3.5.4-01)
Coordination Memo: OWB Stiffened Panels drawings release (Linked to 2018-D_3.1.3-02)
Final Winglet/Wingtip EMA Specification Summary

Final Winglet/Wingtip EMA Specification (Linked to O2.4.1-07 and O2.4.1-08)

Coordination Memo abourt release of Technical documentation supporting CDR (Linked to 2018-D_3.5.3-01)
Coordination Memo: Release of the Innovative ECS Recirculation/Air Treatment System Specification (Linked to KO_2.3.3-07)

System specification input for CfP

Publicaciones

Design of a wing tip device for active maneuver and gust load alleviation

Autores: Federico Fonte, Francesco Toffol, Sergio Ricci
Publicado en: 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018, ISBN 978-1-62410-532-6
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1442

PARAMETRIC APPROACH TO OPERATING COSTS ESTIMATION FOR AN INNOVATIVE REGIONAL AIRCRAFT

Autores: M. Fioriti*, N. Viola*, D. Ferretto*, V. Vercella* and S. Cresto Aleina* *Department of Mechanical and Aerospace Engineering - Politecnico di Torino F. Nicolosi† and V. Cusati† †Department of Industrial Engineering – Aerospace division University of Naples Federico II
Publicado en: 2018
Editor: ICAS

Effects of riblets on the performances of a regional aircraft configuration in NLF conditions

Autores: Pietro Catalano, Donato de Rosa, Benedetto Mele, Renato Tognaccini, Frederic Moens
Publicado en: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1260

Design of a Leading Edge Morphing Based on Compliant Structures for a Twin-Prop Regional Aircraft

Autores: Sergio Ricci, Alessandro De Gaspari, Alessandro Gilardelli, Alessandro Airoldi
Publicado en: 2018 AIAA/AHS Adaptive Structures Conference, 2018, ISBN 978-1-62410-531-9
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1063

Hybrid guided wave based SHM system for composite structures for impact and delamination detection combining fiber Bragg grating sensing and piezoelectric patches

Autores: Ernesto Monaco, Natalino Daniele Boffa, Leandro Maio, Fabrizio Ricci, Edgar Mendoza, Tribikram Kundu, Vittorio Memmolo
Publicado en: Health Monitoring of Structural and Biological Systems XII, 2018, Página(s) 12, ISBN 9781-510616974
Editor: SPIE
DOI: 10.1117/12.2297694

Performance evaluation and DOC Estimation of an Innovative Turboprop Configuration

Autores: Fabrizio Nicolosi, Salvatore Corcione, Vittorio Trifari, Vincenzo Cusati, Manuela Ruocco, Pierluigi Della Vecchia
Publicado en: 2018 Aviation Technology, Integration, and Operations Conference, 2018, ISBN 978-1-62410-556-2
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-3662

Thrust Extraction from Vorticity Fields in Steady and Unsteady Flows

Autores: Lorenzo Russo, Mario Ostieri, Renato Tognaccini
Publicado en: 2018 Applied Aerodynamics Conference, 2018, ISBN 978-1-62410-559-3
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-3967

The relation between vorticity-based and thermodynamic-based drag breakdown

Autores: L. L. Kang∗ , J. Z. Wu∗ , L. Russo† , R. Tognaccini†
Publicado en: 2018
Editor: TU Wien/ EUROMECH

“Aerodynamic design and analysis of an innovative regional turboprop configuration”

Autores: Fabrizio Nicolosi*, Salvatore Corcione*, Pierluigi Della Vecchia*, Vittorio Trifari*, Manuela Ruocco*, *University of Naples Federico II, Department of Industrial Engineering, Aerospace Division
Publicado en: 31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018,, 2018
Editor: ICAS

Multi-Modal Morphing Wing Flaps for Next Generation Green Regional Aircraft: The CleanSky Challenge

Autores: Rosario Pecora
Publicado en: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Página(s) V001T04A018, ISBN 978-0-7918-5194-4
Editor: ASME
DOI: 10.1115/smasis2018-8108

Control strategy of an electrically actuated morphing flap for the next generation green regional aircraft

Autores: Maurizio Arena, Maria Chiara Noviello, Francesco Rea, Francesco Amoroso, Rosario Pecora
Publicado en: Active and Passive Smart Structures and Integrated Systems XII, 2018, Página(s) 19, ISBN 9781-510616875
Editor: SPIE
DOI: 10.1117/12.2296424

Feasibility studies for the installation of Plasma Synthetic Jet Actuators on the skin of a morphing wing flap

Autores: Maurizio Arena, Matteo Chiatto, Francesco Amoroso, Rosario Pecora, Luigi de Luca
Publicado en: Active and Passive Smart Structures and Integrated Systems XII, 2018, Página(s) 21, ISBN 9781-510616875
Editor: SPIE
DOI: 10.1117/12.2300512

Aeroelastic stability analysis of a large civil aircraft equipped with morphing winglets and adaptive flap tabs

Autores: Rosario Pecora, Francesco Amoroso, Ignazio Dimino, Antonio Concilio, Maria Chiara Noviello
Publicado en: Active and Passive Smart Structures and Integrated Systems XII, 2018, Página(s) 20, ISBN 9781-510616875
Editor: SPIE
DOI: 10.1117/12.2300173

Preliminary Assessment of Morphing Winglet and Flap Tabs Influence on the Aeroelastic Stability of Next Generation Regional Aircraft

Autores: Maria Chiara Noviello, Ignazio Dimino, Francesco Amoroso, Antonio Concilio, Rosario Pecora
Publicado en: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Página(s) V001T04A020, ISBN 978-0-7918-5194-4
Editor: ASME
DOI: 10.1115/smasis2018-8138

Technological demonstration of an adaptive aileron system

Autores: Gianluca Amendola, Ignazio Dimino, Rosario Pecora, Francesco Amoroso, Leonardo Lecce, Antonio Concilio
Publicado en: Bioinspiration, Biomimetics, and Bioreplication VIII, 2018, Página(s) 3, ISBN 9781-510616837
Editor: SPIE
DOI: 10.1117/12.2297083

AIRGREEN2 - Clean Sky 2 Programme: Adaptive Wing Technology Maturation, Challenges and Perspectives

Autores: Salvatore Ameduri, Antonio Concilio, Ignazio Dimino, Rosario Pecora, Sergio Ricci
Publicado en: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Página(s) V001T04A023, ISBN 978-0-7918-5194-4
Editor: ASME
DOI: 10.1115/smasis2018-8235

Piezo-driven and Plasma Synthetic Jet Actuators. A comparative investigation

Autores: Chiatto M., Palumbo A., De Luca, L
Publicado en: 2018
Editor: GWFMD

Structural Design of a Multifunctional Morphing Fowler Flap for a Twin-Prop Regional Aircraft

Autores: Francesco Rea, Francesco Amoroso, Rosario Pecora, Maria Chiara Noviello, Maurizio Arena
Publicado en: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Página(s) V001T04A003, ISBN 978-0-7918-5194-4
Editor: ASME
DOI: 10.1115/smasis2018-7937

Design of an Adaptive Twist Trailing Edge for Large Commercial Aircraft Applications

Autores: Francesco Rea, Francesco Amoroso, Rosario Pecora, Markus Kintscher
Publicado en: Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation, 2018, Página(s) V001T04A004, ISBN 978-0-7918-5194-4
Editor: ASME
DOI: 10.1115/smasis2018-7939

Design and aerodynamic analysis of a regional turboprop innovative configuration

Autores: Nicolosi F., Corcione S., Della Vecchia P., Trifari V., Ruocco M., De Marco A.
Publicado en: Paper 893, 6th CEAS Conference , CEAS2017,, 2017, ISBN 978-973-0-25597-3
Editor: CEAS

Developing of a Simscape Multibody Contact Library for Gothic Arc Ball Screws: A Three-Dimensional Model for Internal Sphere/Grooves Interactions

Autores: Antonio Carlo Bertolino, Giovanni Jacazio, Stefano Mauro, Massimo Sorli
Publicado en: Volume 4: Dynamics, Vibration, and Control, 2019, ISBN 978-0-7918-5941-4
Editor: American Society of Mechanical Engineers
DOI: 10.1115/imece2019-10709

Robust Design of a Test Bench for PHM Study of Ball Screw Drives

Autores: A. C. Bertolino, A. De Martin, G. Jacazio, S. Mauro, M. Sorli
Publicado en: Volume 1: Advances in Aerospace Technology, 2019, ISBN 978-0-7918-5936-0
Editor: American Society of Mechanical Engineers
DOI: 10.1115/imece2019-10713

Electrical Flight Control for load control and alleviation system

Autores: G.Pozzuto, A. De Martin, G.Pispola, M. Palmieri, F.Gallorini
Publicado en: MEA2019 Conferences, 2019
Editor: MEA2019 Conferences

“Surrogate Models in flap design of Clean Sky 2”

Autores: S.de Lucas
Publicado en: EUROGEN 2019 Portugal, Edición Bi-yearly, 2019
Editor: EUROGEN: Evolutionary and Deterministic Computing for Industrial Applications within EUCCOMAS

"“Inclusion of structure and loads objectives in the definition of probability for Flight Control System failures in the frame of FTB#2 Cleansky2”"

Autores: M.Rodriguez
Publicado en: EuCASS 2019 Spain, Edición Bi-yearly, 2019
Editor: EuCASS: 8th European Conference for Aeronautics and Space Sciences

Design Guidelines for High Capacity Innovative Regional Turboprop Aircraft

Autores: Fabrizio Nicolosi, Salvatore Corcione, Vittorio Trifari, Pierluigi Della Vecchia, Agostino De Marco
Publicado en: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-0256

Green regional aircraft gust response

Autores: Sylvie Dequand
Publicado en: Greener Aviation COnference 2016, 2016
Editor: 3AF

Preliminary Design and performance of a morphing winglet for green regional A/C

Autores: Ignazio Dimino
Publicado en: Greener Aviation COnference 2016, 2016
Editor: 3AF

Research activities of ONERA on laminar wings in the framework of the JTI CLean Sky: transition prediction

Autores: Maxime Forte
Publicado en: Greener Aviation COnference 2016, 2016
Editor: 3AF

The ASTIB project

Autores: Prof. G. Jacazio
Publicado en: 2017
Editor: SAE - Society of Automotive Engineers

Experimental shape reconstruction of a morphing wing trailing edge in simulated operative condition

Autores: ,F. Amoroso F. Rea, M. Arena, M. C. Noviello R. Pecora, (UNINA) I. Dimino (CIRA)
Publicado en: 2017
Editor: ICMAE

Improving Aeroelastic model accuracy and affordability by exploiting wind tunnel test results

Autores: M.Di Gifico V.Vaccaro (LDO VEL)
Publicado en: 2017
Editor: Department of Aerospace Science and Technology of Politecnico di Milano

Design of aeroelastic wingtip devices for wing load alleviation

Autores: F. Toffol F. Fonte Prof S Ricci (POLIMI)
Publicado en: 2017
Editor: Department of Aerospace Science and Technology of Politecnico di Milano

Increased Order Aeroservoelastic Modeling in Practice

Autores: Reyes M. Climen H Karpel M (CASA)
Publicado en: 2017
Editor: Department of Aerospace Science and Technology of Politecnico di Milano

Preliminary Design of the Actuation Mechanism of a Morphing Winglet for Green Regional A/C

Autores: I. Dimino, G. Amendola, A. Concilio, G. Andreutti (UNINA) G. Pispola, F. Perni (UMBRA)
Publicado en: 2017
Editor: ICAST

Conceptual Design of a Morphing Wingle

Autores: G. Amendola, I. Dimino, A. Concilio, G. Andreutti (CIRA) R. Pecora, M. Lo Cascio (UNINA)
Publicado en: 2017
Editor: ICMAE

Investigation of a Plasma Synthetic Jet Actuator for Flow Control.

Autores: M. Chiatto, L. de Luca (CIRA)
Publicado en: 2017
Editor: EFMC11

Numerical and Experimental Frequency Response of Plasma Synthetic Jet Actuator

Autores: M. Chiatto, L. de Luca (CIRA)
Publicado en: 2017
Editor: AIAA

Influence of Riblets and Laminar Flow Control on the Performance of a Regional Aircraft Configuration

Autores: P. Catalano, D. de Rosa (CIRA) Proff. B. Mele, R. Tognaccini, (UNINA) F. Moens (ONERA)
Publicado en: 2017
Editor: Prof. M. Quadrio (POLIMI) Prof. P. Luchini (UNISA) Prof. Kwing-So Choi (U-NOT)

Modelling drag reduction devices by slip length at high Reynolds number

Autores: Proff. B. Mele, R. Tognaccini (UNINA)
Publicado en: 2017
Editor: Prof. M. Quadrio (POLIMI) Prof. P. Luchini (UNISA) Prof. Kwing-So Choi (U-NOT)

Performance characteristics of plasma synthetic jets actuator

Autores: M. Chiatto, L. de Luca (CIRA)
Publicado en: 2017
Editor: AIMETA

Slip length based boundary condition for modeling drag reduction devices

Autores: Proff. B. Mele, R. Tognaccini (UNINA)
Publicado en: 2017
Editor: AIAA Aviation 2017

ICAS - 29th Congress of the International Council of the Aeronautical Sciences ADAPTIVE CONTROLLER DESIGN FOR GUST LOAD ALLEVIATION Politecnico di Torino

Autores: PoliTO
Publicado en: 2015
Editor: ICAS

CS - Structural design of high lift and load control and alleviation devices for a natural laminar flow wing ASAM project PLM

Autores: PLM
Publicado en: 2015
Editor: PLM

Politecnico di Torino, Italy - 23rd Conference of the Italian Association of Aeronautics and Astronautics LOAD CONTROL AND ALLEVIATION TECHNOLOGY FOR APPLICATION TO FUTURE GREEN REGIONAL AIRCRAFT Politecnico di Torino

Autores: PoliTO, FNM VEL
Publicado en: 2015
Editor: PoliTO, FNM VEL

Manchester, UK 10th AIAA/CEAS Aeroacoustics Conference, No. AIAA-2004-2955, Manchester, UK, 2004. WENEMOR: Wind Tunnel Tests for the Evaluation of the Installation Effects of Noise Emissions of an Open Rotor Advanced Regional Aircraft

Autores: Trinity College Dublin, Pininfarina S.p.A. Italy, Teknosud S.R.L Italy, Univ.Polit. delle Marche Italy, Paragon SA Greece, Eurotech, Italy, FNM VEL
Publicado en: 2015
Editor: AIAA/CEAS

Investigation of manufacturing effects by strength assessment, NDI and guided waves based SHM in composite plates reinforced with bonded stringers

Autores: Natalino D. Boffa, Ernesto Monaco, Fabrizio Ricci, F. Amoroso
Publicado en: Health Monitoring of Structural and Biological Systems XIII, Edición PROCEEDINGS VOLUME 10972, 2019, Página(s) 31, ISBN 9781-510626003
Editor: SPIE
DOI: 10.1117/12.2516639

Hybrid structural health monitoring on a composite plate manufactured with automatic fibers placement including embedded fiber Bragg gratings and bonded piezoelectric patches

Autores: Natalino D. Boffa, Ernesto Monaco, Fabrizio Ricci, Leonardo Lecce, Marco Barile, Vittorio Memmolo
Publicado en: Health Monitoring of Structural and Biological Systems XIII, 2019, Página(s) 27, ISBN 9781-510626003
Editor: SPIE
DOI: 10.1117/12.2516537

A SIMULATION METHODOLOGY FOR THE DESIGN OF TRAILING-EDGE FLAP DEPLOYMENT MECHANISM

Autores: A. E. ÖNGÜT, E. ALLEGAERT, Y. LEMMENS (SISW)
Publicado en: CAASE18: The Conference on Advancing Analysis & Simulation in Engineering, 2018, Página(s) all pages
Editor: CAASE18

Aerodynamic Design, analysis and optimization of an innovative regional aircraft

Autores: F. Nicolosi, S. Corcione, P. Della Vecchia, A. De Marco, M. Ruocco, V. Trifari, V. Cusati (UNINA)
Publicado en: ICAS 2018, 2018
Editor: ICAS 2018

Real Time Loading Test Rig for Flight Control Actuators Under PHM Experimentation

Autores: P. Chiavaroli, A. De Martin, G. Evangelista, G. Jacazio, M. Sorli
Publicado en: Volume 1: Advances in Aerospace Technology, 2018, ISBN 978-0-7918-5200-2
Editor: American Society of Mechanical Engineers
DOI: 10.1115/imece2018-86967

Drag reduction of three-dimensional riblets on a at plate turbulent boundary layer

Autores: Cafiero, Gioacchino; Iuso, Gaetano (POLITO)
Publicado en: 72nd Annual Meeting of the American Physical Society - Division of Fluid Dynamics, 2019
Editor: apsdfd2019

Composite reinforced plates built by co-infusion or secondary bonding techniques: analysis of the effects of manufacturing approach on compression behaviour by mechanical tests, NDI and guided waves based SHM”

Autores: Monaco, E., Boffa, N.D., Ricci, F.
Publicado en: AIDAA 2019 Congress, 2019
Editor: A.I.D.A.A. – Associazione Italiana di Aeronautica e Astronautica

Flutter analysis of a large civil aircraft in case of free-plays and internal failures of morphing wing flaps mechanical systems

Autores: Rosario Pecora, Francesco Amoroso, Ignazio Dimino, Antonio Concilio
Publicado en: Active and Passive Smart Structures and Integrated Systems XIII, 2019, Página(s) 31, ISBN 9781-510625907
Editor: SPIE
DOI: 10.1117/12.2514251

"""Morphing wing flaps for large civil transportation aircraft: the evolution of a smart technology across the cleansky program"""

Autores: Pecora, R.,
Publicado en: Smart Aircraft Symposium (invited lecture) held at Xi'An Jiaotong University,, 2017
Editor: ELSEVIER

Morphing wing flaps for large civil aircraft: the CleanSky-GRA challenge

Autores: R. Pecora, F. Amoroso
Publicado en: AIDAA 2019 Congress, 2019
Editor: AIDAA

Structural design of a three-modal camber morphing wing flap for large civil aircraft applications

Autores: F. Rea, F. Amoroso, R. Pecora,
Publicado en: AIDAA 2019 Congress, 2019
Editor: AIDAA

“Aeroelastic stability assessment of a CS-25 category aircraft equipped with morphing wing devices”

Autores: M.C. Noviello, F. Amoroso, R. Pecora, I. Dimino, A. Concilio,
Publicado en: AIDAA 2019 Congress, 2019
Editor: AIDAA

“ACSIS (Actuation, Control & Sensing Integrated System) for morphing structures”

Autores: M. Arena, F. Amoroso, R. Pecora,
Publicado en: AIDAA 2019 Congress, 2019
Editor: AIDAA

Aerodynamic Force Breakdown Based on Vortex Force Theory

Autores: Linlin Kang, Lorenzo Russo, Renato Tognaccini, Jiezhi Wu, Weidong Su
Publicado en: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-2122

"""High Lift Aerodynamic characteristics of a Three Lifting Surfaces Turboprop Aircraft"""

Autores: S. Corcione, P. Della Vecchia, F. Nicolosi, D. Ciliberti and V. Cusati,
Publicado en: AIAA Aviation 2019 Forum, (AIAA 2019-2884),, 2019
Editor: AIAA Aviation 2019 FORUM eISBN: 978-1-62410-589-0

“Longitudinal stability issues including propulsive effects on an innovative commercial propeller-driven aircraft”

Autores: S. Corcione, P. Della Vecchia, F. Nicolosi, D. Ciliberti and V. Cusati,
Publicado en: AIAA Aviation 2019 Forum, (AIAA 2019-2882), 2019
Editor: AIAA Aviation

“Directional stability issues of a three lifting surface aircraft”,

Autores: S. Corcione, V. Cusati, F. Nicolosi, D. Ciliberti,
Publicado en: XXV AIDAA Congress, 2019
Editor: AIDAA

Slip Length–Based Boundary Condition for Modeling Drag Reduction Devices

Autores: Benedetto Mele, Renato Tognaccini
Publicado en: AIAA Journal, Edición 56/9, 2018, Página(s) 3478-3490, ISSN 0001-1452
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j056589

A Calibrated Lumped Element Model for the Prediction of PSJ Actuator Efficiency Performance

Autores: Matteo Chiatto, Andrea Palumbo, Luigi de Luca
Publicado en: Actuators, Edición 7/1, 2018, Página(s) 10, ISSN 2076-0825
Editor: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7010010

Description of Position Control Laws for Functionality Test of a Bi-modal Morphing Flap

Autores: Noviello M.C., Rea F., Arena M., Pecora R., Amoroso F.
Publicado en: International Journal of Mechanical Engineering and Robotics Research, 2019, ISSN 2278-0149
Editor: IJMERR
DOI: 10.18178/ijmerr.8.1.31-40

Exploitation of a Multifunctional Twistable Wing Trailing-Edge for Performance Improvement of a Turboprop 90-Seats Regional Aircraft

Autores: Francesco Rea, Francesco Amoroso, Rosario Pecora, Frederic Moens
Publicado en: Aerospace, Edición 5/4, 2018, Página(s) 122, ISSN 2226-4310
Editor: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/aerospace5040122

Preliminary Design Process for an Adaptive Winglet

Autores: Gianluca Amendola, Ignazio Dimino, Antonio Concilio, Giovanni Andreutti, Rosario Pecora, Marco Lo Cascio
Publicado en: International Journal of Mechanical Engineering and Robotics Research, Edición 6/6, 2017, Página(s) 83-92, ISSN 2278-0149
Editor: IJMERR
DOI: 10.18178/ijmerr.7.1.83-92

Measurements versus Numerical Simulations for Slotted Synthetic Jet Actuator

Autores: Andrea Palumbo, Matteo Chiatto, Luigi de Luca
Publicado en: Actuators, Edición 7/3, 2018, Página(s) 59, ISSN 2076-0825
Editor: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7030059

Electro-Actuation System Strategy for a Morphing Flap

Autores: Maurizio Arena, Francesco Amoroso, Rosario Pecora, Salvatore Ameduri
Publicado en: Aerospace, Edición 6/1, 2019, Página(s) 1, ISSN 2226-4310
Editor: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/aerospace6010001

Plasma Synthetic Jet Actuators for Active Flow Control

Autores: Haohua Zong, Matteo Chiatto, Marios Kotsonis, Luigi de Luca
Publicado en: Actuators, Edición 7/4, 2018, Página(s) 77, ISSN 2076-0825
Editor: MDPI Multidisciplinary Digital Publishing Institute
DOI: 10.3390/act7040077

Numerical and experimental validation of a full scale servo-actuated morphing aileron model

Autores: Maurizio Arena, Francesco Amoroso, Rosario Pecora, Gianluca Amendola, Ignazio Dimino, Antonio Concilio
Publicado en: Smart Materials and Structures, Edición 27/10, 2018, Página(s) 105034, ISSN 0964-1726
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-665x/aad7d9

Numerical and experimental characterization of a double-orifice synthetic jet actuator

Autores: Matteo Chiatto, Francesco Capuano, Luigi de Luca
Publicado en: Meccanica, Edición 53/11-12, 2018, Página(s) 2883-2896, ISSN 0025-6455
Editor: Kluwer Academic Publishers
DOI: 10.1007/s11012-018-0866-7

Application of laser Doppler vibrometry for ultrasonic velocity assessment in a composite panel with defect

Autores: L. Maio, F. Ricci, V. Memmolo, E. Monaco, N.D. Boffa
Publicado en: Composite Structures, Edición 184, 2018, Página(s) 1030-1039, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2017.10.059

Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites

Autores: V. Memmolo, Y.J. Park, M. Lilov, E. Monaco, F. Ricci
Publicado en: Composite Structures, Edición 202, 2018, Página(s) 1229-1238, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2018.05.125

Aero-servo-elastic design of a morphing wing trailing edge system for enhanced cruise performance

Autores: Maurizio Arena, Antonio Concilio, Rosario Pecora
Publicado en: Aerospace Science and Technology, Edición 86, 2019, Página(s) 215-235, ISSN 1270-9638
Editor: Elsevier BV
DOI: 10.1016/j.ast.2019.01.020

Guided wave propagation and scattering for structural health monitoring of stiffened composites

Autores: V. Memmolo, E. Monaco, N.D. Boffa, L. Maio, F. Ricci
Publicado en: Composite Structures, Edición 184, 2018, Página(s) 568-580, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2017.09.067

Flutter Clearance Investigation of Camber-Morphing Aileron Tailored for a Regional Aircraft

Autores: Maurizio Arena, Rita Palumbo, Rosario Pecora, Francesco Amoroso, Gianluca Amendola, Ignazio Dimino
Publicado en: Journal of Aerospace Engineering, Edición 32/2, 2019, Página(s) 04018146, ISSN 0893-1321
Editor: American Society of Civil Engineers
DOI: 10.1061/(asce)as.1943-5525.0000973

Design of a PHM system for electro-mechanical flight controls: a roadmap from preliminary analyses to iron-bird validation

Autores: Andrea De Martin, Giovanni Jacazio, Massimo Sorli
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 04018, ISSN 2261-236X
Editor: EDP sciences
DOI: 10.1051/matecconf/201930404018

Lumped parameters modelling of the EMAs’ ball screw drive with special consideration to ball/grooves interactions to support model-based health monitoring

Autores: Antonio Carlo Bertolino, Massimo Sorli, Giovanni Jacazio, Stefano Mauro
Publicado en: Mechanism and Machine Theory, Edición 137, 2019, Página(s) 188-210, ISSN 0094-114X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.mechmachtheory.2019.03.022

Prediction of the acoustic shielding by aircraft empennage for contra-rotating open rotors

Autores: L Sanders, D-C Mincu, PL Vitagliano, M Minervino, J Kennedy, G Bennett
Publicado en: International Journal of Aeroacoustics, Edición 16/7-8, 2017, Página(s) 626-648, ISSN 1475-472X
Editor: Multi-Science Publishing Co. Ltd
DOI: 10.1177/1475472x17734334

Aerodynamic Shape Design and Validation of an Advanced High-Lift Device for a Regional Aircraft with Morphing Droop Nose

Autores: Alessandro De Gaspari, Frédéric Moens
Publicado en: International Journal of Aerospace Engineering, Edición 2019, 2019, Página(s) 1-21, ISSN 1687-5966
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2019/7982168

Powered wind tunnel tests setup of the IRON innovative turboprop aircraft

Autores: Danilo Ciliberti, Vincenzo Cusati, Pierluigi Della Vecchia, Salvatore Corcione, Fabrizio Nicolosi
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 02022, ISSN 2261-236X
Editor: MATEC
DOI: 10.1051/matecconf/201930402022

Feasibility study of innovative regional turboprop: an overview of the European project IRON

Autores: Salvatore Corcione, Vittorio Trifari, Fabrizio Nicolosi, Vincenzo Cusati, Danilo Ciliberti, Pierluigi Della Vecchia
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 03014, ISSN 2261-236X
Editor: MATEC
DOI: 10.1051/matecconf/201930403014

Understanding of structural and acoustic behaviour of stiffened composite panels for fuselage applications FNM VEL

Autores: FNM VEL
Publicado en: 2015
Editor: FNM VEL

"""CS - Composite Fuselage One Piece Barrel (OPB): Integrated Development and Prototype Demonstration AFLOG project OMI"""

Autores: OMI
Publicado en: 2015
Editor: OMI

Optical fibres and piezoelectric technologies applications in flight and ground demonstrations. Fraunhofer

Autores: Fraunhofer
Publicado en: 2015
Editor: Fraunhofer

Composite Platform SHM design from flight and ground demonstration requirements

Autores: FNM VEL
Publicado en: 2015
Editor: FNM VEL

"""CS - Design Considerations of an Autonomous Wireless Sensor Network for Structural Health Monitoring in Aircraft WILDCRAFT project CEIT """

Autores: CEIT
Publicado en: 2015
Editor: CEIT

Structural Health Monitoring of a composite stiffened panel FNM VEL

Autores: FNM VEL
Publicado en: 2015
Editor: FNM VEL

CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autores: cira
Publicado en: 2015
Editor: CIRA

Full-scale Wind Tunnel Demonstration of Nose Landing Gear Low-Noise Technologies for Future Regional Aircraft “ALLEGRA” project Trinity College Dublin

Autores: Trinity College Dublin
Publicado en: 2015
Editor: Trinity College Dublin

Brussels - Clean Sky General Forum - CS - Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autores: CIRA
Publicado en: 2015
Editor: CIRA

CS - ETRIOLLA Actuation and measurement technologies for WTT of the innovative regional transonic wing ETRIOLLA project IBK Innovation GmbH

Autores: IBK
Publicado en: 2015
Editor: IBK

London - Droop Nose Technology toward Future Green Regional Aircraft: Development and Prototype Demonstration Fraunhofer

Autores: Fraunhofer
Publicado en: 2015
Editor: Fraunhofer

Design, development and manufacturing of an electro-mechanical actuator and test rig for AiRcrafts Main LandIng Gear AcTuation systems ARMLIGhT project CESA Spain

Autores: CESA
Publicado en: 2015
Editor: CESA

Airframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA, Italy, INCAS, Romania, FOI, Chalmers University of technology, Sweden and ONERA, France

Autores: CIRA, INCAS, FOI, Chalmers University of technology, ONERA
Publicado en: 2015
Editor: CIRA, INCAS, FOI, Chalmers University of technology, ONERA

CS - ADAVES advanced avionics equipment simulation ADAVES project

Autores: EDISOFT-EMPRESA DE SERVICOS E DESENVOLVIMENTO DE SOFTWARE SA
Publicado en: 2015
Editor: EDISOFT-EMPRESA DE SERVICOS E DESENVOLVIMENTO DE SOFTWARE SA

An Electrical POwer Center for Aeronautical Loads “EPOCAL” project Seconda Università degli Studi di Napoli

Autores: Seconda Università degli studi di Napoli
Publicado en: 2015
Editor: Seconda Università degli studi di Napoli

Future Green Regional A/C Gust Load Alleviation control system experimental validation through innovative WT tests GLAMOUR project Politecnico di Milano

Autores: Politecnico di Milano
Publicado en: 2014, 2015
Editor: Politecnico di Milano

Future Green Regional A/C Transonic Laminar Wing experimental assessment Through innovative WT tests Drag passive reduction by riblets technology: Results from GRA ITD studies and prospects for further achievements Università di Napoli, Politecnico di Torino

Autores: "Università di Napoli ""Federico II"", Politecnico di Torino"
Publicado en: 2015
Editor: "Università di Napoli ""Federico II"", Politecnico di Torino"

"""Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests ETRIOLLA project IBK """

Autores: IBK
Publicado en: 2015
Editor: IBK

Aerodynamic Design Based on Numerical Optimization of a Green ATF Regional Aircraft Piaggio Aerospace, FNM VEL

Autores: Piaggio Aerospace, FNM VEL
Publicado en: 2015
Editor: Piaggio Aerospace, FNM VEL

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Landing Gear Aiframe Noise Reduction Technology Development for Future Green Regional Aircraft CIRA

Autores: CIRA
Publicado en: 2015
Editor: CIRA

Optimization of Morphing Wings for Improved Environmental Performance MAWS project University of Bristol

Autores: University of Bristol
Publicado en: 2014, 2015
Editor: University of Bristol

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Wind Tunnel Test and CFD/CAA Analysis on a Scaled Model of a Nose Landing Gear Fraunhofer

Autores: Fraunhofer
Publicado en: 2014, 2015
Editor: Fraunhofer

Natural Laminar Flow Transonic Wing Design applied to Future Innovative Green Regional Aircraft

Autores: ONERA, FNM VEL, CIRA
Publicado en: 2015
Editor: ONERA, FNM VEL, CIRA

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Load Control and Alleviation Technology for application to future Green Regional Aircr aft FNM VEL

Autores: FNM VEL
Publicado en: 2014, 2015
Editor: FNM VEL

Innovative Electrical Energy Management strategy for Future Regional All-Electric Aircraft FNM VEL

Autores: FNM VEL
Publicado en: 2015
Editor: FNM VEL

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Design, Development and Test of Synthetic Jets Actuators for Future Green Regional Aircraft Fraunhofer

Autores: Fraunhofer
Publicado en: 2015
Editor: Fraunhofer

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Smart Droop Nose for application to Laminar Wing of future Green Regional A/C Fraunhofer

Autores: Fraunhofer
Publicado en: 2015
Editor: Fraunhofer

ATR : Green FMS functions for a green Aircraft

Autores: Thales Avionics, ATR
Publicado en: 2015
Editor: Thales Avionics, ATR

Future Green Regional A/C Transonic Laminar Wing experimental assessment through innovative WT tests Aiframe Noise Reduction Technologies applied to High-Lift Devices of Future Green Regional Aircraft CIRA

Autores: CIRA
Publicado en: 2015
Editor: CIRA

A SIMULATION METHODOLOGY FOR THE DESIGN OF TRAILING-EDGE FLAP DEPLOYMENT MECHANISM

Autores: A. E. ÖNGÜT, E. ALLEGAERT, Y. LEMMENS (SISW)
Publicado en: CAASE18, The Conference on Advancing Analysis & Simulation in Engineering, 2018
Editor: CAASE18

Comprehensive Robust Adaptive Controller for Gust Load Alleviation

Autores: Elisa Capello,* Giorgio Guglieri, and Fulvia Quagliotti
Publicado en: THE SCIENTIFIC WORLD JOURNAL, 2015, ISSN 1537-744X
Editor: ScientificWorld, Inc.

Derechos de propiedad intelectual

METHODS OF MANUFACTURING PANELS OF COMPOSITE MATERIAL REINFORCED WITH CLOSED-SECTION STRINGERS

Número de solicitud/publicación: 16 177404
Fecha: 2016-07-01
Solicitante(s): LEONARDO - SOCIETA PER AZIONI

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles