Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Innovative RUNning gear soluTiOns for new dependable, sustainable, intelligent and comfortable RAIL vehicles

Livrables

Proposals for authorisation strategy for rail vehicles with active suspension

Report with proposals for an authorisation process that ensures reliable vehicles on one side but also a realistic and manageable process for suppliers and operators.

Set-up public website

This is for the set up, and going live, of a public website for the project. This will be continuously updated with news and results throughout the life of the project.

Validation of complete virtual test method for structure-borne and airborne noise transmission

This deliverable will report the results of the validation tests and comparisons between the complete virtual test method and the field measurements. From this the reliability of the virtual test method will be established.

State of the art of actuator technology

Report on the state of the art of actuator technology used in vehicles (including e.g. rail and road vehicles and airplanes) and other similar technical systems.

New actuation systems for conventional vehicles and an innovative concept for a two-axle vehicle with active suspension

Report with suggestions of new actuation concepts for conventional bogie vehicles. It will also contain a concept for an innovative two-axle vehicle for metro, suburban or regional traffic with low weight running gear and good vehicle dynamics performance due to active suspension. The report also contains simulation results supporting the suggestions.

Performance requirement statement for optimised running gear using novel materials

This concise report will summarise the specific performance requirements for a railway vehicle with optimised running gear based on novel materials. It will include sections on Body Structure, Running Gear and Wheelsets. It will be available for use in the Run2Rail project and for external researchers and vehicle designers.

Report on novel materials and manufacturing concept solutions

This report will include the philosophy, methods, findings and conclusions from the work on novel materials for railway vehicle running gear. This will include description of carbon fibre composites, additive manufacturing and any other materials considered in the project. It will also include modelling techniques developed for design and assessment of the novel material solutions.

Description of methods for characterising suspension elements

This deliverable will report results of modelling and test methods for characterising suspension elements including shock absorbers, air springs and coil springs.

Dissemination and Exploitation activities report

Report summarising the results/impacts of all the dissemination, communication and exploitation activities

Complete virtual test method for structure-borne and airborne noise transmission

This deliverable will describe the complete virtual test method, including the various sub-models and the way they are assembled. Methods for determining wheelset vibration, structure-borne noise transmission and airborne noise transmission will be described, including example results for the chosen case study.

Publications

Fault-tolerant analysis for active steering actuation system applied on conventional bogie vehicle

Auteurs: Bin Fu and Stefano Bruni
Publié dans: Lecture Notes in Mechanical Engineering, Numéro Numéro in preparation, 2019
Éditeur: Springer International Publishing

Study of the influence falling friction on the wheel/rail contact in railway dynamics

Auteurs: J. Giner-Navarro, V. Andrés-Ruiz, J. Martínez-Casas, F. D. Denia
Publié dans: Mathematical Modelling in Engineering & Human Behaviour 2019, Numéro Yearly, 2019, Page(s) 88-93, ISBN 978-84-09-16428-8
Éditeur: Instituto de Matemática Multidisciplinar

Extension of the modal superposition method for general damping applied in railway dynamics

Auteurs: J. Giner-Navarro, V. Andrés-Ruiz, J. Martínez-Casas, F. D. Denia
Publié dans: Mathematical Modelling in Engineering & Human Behaviour 2019, Numéro Yearly, 2019, Page(s) 94-98, ISBN 978-84-09-16428-8
Éditeur: Instituto de Matemática Multidisciplinar

Architecture for an on-board condition-based monitoring system for the running gear of railway vehicles: Run2Rail vision

Auteurs: Martin Jarillo, Julian; Moreno Garcia-Loygorri, Juan; Alfi, Stefano; Barcet, Sylvain; Bouvet, Pascal; Bruni, Stefano; Cervello, Steven; Costa, Bruno; Licciardello, Riccardo
Publié dans: Proceedings of the institution of mechanical engineers,Part F: Journal of Rail and Rapid Transit, 2020
Éditeur: Sage Publishing

Intelligent wheelsets for the trains of the future: the role of in-service wheel-rail force measurement

Auteurs: F. Velletrani, R. Licciardello
Publié dans: Ingegneria Ferroviaria, 2020
Éditeur: CIFI Collegio Ingegneri Ferroviari Italiani

Using a 2.5D BE model to determine the sound pressure on the external train surface

Auteurs: Hui Li, David Thompson, Giacomo Squicciarini, Xiaowan Liu, Martin Rissmann, Francisco D. Denia, Juan Giner-Navarro
Publié dans: 13th International Workshop on Railway Noise, Ghent, Belgium, 16-20 Sep 2019, 2019
Éditeur: The final proceedings will be published by Springer in 2020

Virtual test method of structure borne sound for a metro bogie

Auteurs: Gang Xie, Martin Rissmann, Pascal Bouvet, Xiaowan Liu, David Thompson, Luis Baeza, Juan Moreno, Julián Martín Jarillo, Francisco D. Denia, Juan Giner-Navarro, Ines Lopez Arteaga
Publié dans: The 13th International Workshop of Railway Noise, Numéro Every 3 years, 2019
Éditeur: The 13th International Workshop of Railway Noise

Analysis of the backward bending modes in damped rotating beams

Auteurs: Jose Martínez-Casas, Francisco David Denia, Juan Fayos Sancho, Enrique Nadal Soriano, Juan Giner-Navarro
Publié dans: Advances in Mechanical Engineering, Numéro 11/4, 2019, Page(s) 168781401984047, ISSN 1687-8140
Éditeur: SAGE
DOI: 10.1177/1687814019840474

Active controls of independently-rotating wheels with gyro and tachometers – Simple solutions for perfect curving and high stability performances

Auteurs: Liu X, Goodall R, Iwnicki S
Publié dans: Vehicle System Dynamics, 2019
Éditeur: Vehicle System Dynamics

Yaw Compensation and Yaw Relaxation Controls for Active Steering of Railway Wheelsets via Electromechanical Actuators

Auteurs: Liu X, Goodall R, Iwnicki S
Publié dans: Rail and Rapid Transit, 2019
Éditeur: Rail and Rapid Transit

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible