Investigation and development of a new generation of machines for the processing of composite and nanocomposites materials

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Training materials for T5.1, T5.2 workshops and e-Learning

Training materials of all T51 and T52 workshops elaborated and available in pdf format on the NEWEX website within 2 weeks after each workshop Tests form of quiz dedicated to all workshop participants NEWEX participants researchers students experts prepared and evaluated by trainers within 1 month after each workshopSummary internal reports and description of results on months 1 7 20 26 41Lead Beneficiary all Partners

Articles for scientific publications

Some professional periodicals were chosen to publish the results of the NEWEX projectDuring project the received results of NEWEX project will be systematically published in peerreview magazines 12 per year as well as presented and discussed at international and national conferences 12 per year Lead Beneficiary all Partners

e-Learning platform

eLearning platform MOODLE based for dedicated to evaluation and share ofknowledge gained mainly during the workshops in the form of quiz set ofquestions problems for analysis and discussion established at the earlystage of NEWEX updated regularly after each workshop evaluation ofstudents results within 1 month after each workshop Summary report of installation configuration presentation to users onmonth 3

Training materials on T5.3 inter-sector and international cooperation

Training materials on all T54 workshops elaborated and available in pdf format on the NEWEX websitewithin 2 weeks after each workshop Summary reports on months 3 12 14 20 30 41Lead Beneficiary all Partners

Rotational barrel segment in metal

The best chosen model of rotational barrel segment will be made by SME.

Special screw in metal

The best chosen model of special screw will be made by SME.

New extruder prototype (pilot)

The chosen active grooved feed section, rotational barrel segment, special screw, automation and control system as well as auxiliary elements will be used to make a new, prototype extruder.

Physical models (3D print.) of extruder elements

A physical model of the plasticizing system will be made and will consist of the best chosen IAGFS, ORBS and SS.

Active grooved feed section in metal

The best chosen model of active grooved feed section will be made by SME.

Automation and control system

Automation and control system will be chosen in such a way as to fulfil the requirements and will constitute the equipment of the new extruder

Auxiliary elements of new extruder

Auxiliary elements of the new extruder will be adjusted: temperature and pressure sensors, heating elements, motor, hopper, elements of the barrel, extruder head etc.

Comparative research results

A detailed comparative analysis of the results received at the standard extruder and at the new extruder as well as the process and product advantages of the latter one will be determined

New extruder and extrusion process test results

Studies will be conducted of the new extruder and extrusion process ad will include the measurement of the distribution of the pressure p MPa and temperature T oC of the polymer along the plasticizing system and extruder head torque at the screw M Nm extrudate mass m kg time of energy measurement te s time of extrudate measurement tex s temperature of the extrudate T oC extrusion speed V ms as well as unit energy consumption EEC Jkg energy efficiency polymer output G kgh die swell power supplied to the extruder QC W power transferred by the polymer QN W

Extrudate properties report

Studies will be conducted of the extrudate received at the new extruder and the following will be determined Youngs modulus E MPa ultimate tensile stress M MPa breaking stress r MPa strain at ultimate stress M strain at break r impact strength U kJm2 hardness H oSh melt flow index MFR g10minand MVR cm310min heat deflection temperature HDT oC linear shrinkage S temperature of phase transitions degree of crystallinity enthalpy relationship of the specific volume to temperature and pressure degree of polymer homogenization microscope laboratory studies of the material structure

Publications

PRESENTATION OF COMPANY DIRMETA

Auteurs: Povilas Padleckas
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 20-23, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

PRESENTATION SEZ KROMPACHY, a.s., SLOVAKIA

Auteurs: Ján Gabonay
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 31-36, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

CHARACTERISTICS OF SOLID AND POROUS INJECTION MOLDED PARTS WITH WELD LINE AREAS

Auteurs: Elżbieta Bociaga
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 104-107, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

THE PRODUCTION OF METAL PARTS OF A NEW TYPE OF EXTRUDER

Auteurs: Ján Varga, Ľudmila Dulebová, Janusz W. Sikora
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 88-91, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

CHARACTERISTICS OF THE EXTRUSION PROCESS AND PROPERTIES OF NANOCOMPOSITES BASED ON POLYETHYLENE WITH THE ADDITION OF HALLOYSITE NANOTUBES

Auteurs: Łukasz Majewski
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 133-136, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

COMPARISON OF THE EXTRUSION PROCESS AND PROPERTIES OF NANOCOMPOSITES OBTAINED ON THE BASIS OF POLYETHYLENE USING A NEW GENERATION AND STANDARD EXTRUDER

Auteurs: Janusz W. Sikora, Povilas Padleckas, Ján Gabonay, Ľudmila Dulebová
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 110-115, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

CAE ANALYSIS OF DISTRIBUTIVE AND DISPERSIVE MIXING IN ROTATIONAL BARREL SEGMENT

Auteurs: Ivan Gajdoš, Emil Spišák, Volodymyr Krasynskyi
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 100-103, ISBN 978-80-553-4073-9
Éditeur: Technical University Of Kosice

PRESENTATION OF FACULTY OF MECHANICAL ENGINEERING OF LUBLIN UNIVERSITY OF TECHNOLOGY

Auteurs: Anna Rudwska
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 11-14, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

PRESENTATION OF CAD/CAM PRODUCTION CAPABILITIES OF TOOL ROOM SEZ KROMPACHY A.S.

Auteurs: Vladimír Hric, Radovan Jenčík, Peter Chorovský, Jozef Humeňanský
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 37-42, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

PRESENTATION OF THE LUBLIN UNIVERSITY OF TECHNOLOGY

Auteurs: Beata Kijak-Mitura
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 24-30, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

DATA CLUSTERING PROCEDURES: A GENERAL REVIEW

Auteurs: A. Manuela Gonçalves, António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 59-62, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

IN-PROCESS MEASUREMENTS IN POLYMER EXTRUSION

Auteurs: José A. Covas
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 108-109, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

MULTI-OBJECTIVE POLYMER SINGLE SCREW EXTRUDER OPTIMIZATION

Auteurs: Ana Maria A. C. Rocha, M. Fernanda P. Costa, A. Gaspar-Cunha, Edite M. G. P. Fernandes
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 63-67, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

A PENALTY SCHEME FOR THE TCHEBYCHEFF SCALARIZATION METHOD TO OPTIMIZE THE SINGLE SCREW EXTRUSION

Auteurs: Ana Maria A. C. Rocha, M. Fernanda P. Costa, A. Gaspar-Cunha, Edite M. G. P. Fernandes
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 51-54, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

NANOCOMPOSITES BASED ON POLYAMIDE-6 AND MONTMORILLONITE INTERCALATED WITH POLYVINYLPYRROLIDONE

Auteurs: Volodymyr Krasinskyi, Janusz W. Sikora, Oleh Suberlyak
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 125-128, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

EXTRUSION-COOKING TECHNOLOGY IN FOOD PRODUCTION - RAW MATERIALS AND APPLICATIONS

Auteurs: Aneta Bobryk-Mamczarz, Paweł Głowacki
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 121-124, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

New Generation of Extruders with Active Grooved Feed Section andRotational Barrel Segment

Auteurs: Janusz Sikora
Publié dans: 36 International Conference of the Polymer Processing Society, Numéro once a year, 2021, Page(s) S01-720
Éditeur: The Polymer Processing Society

A REVIEW ON OPTIMIZATION IN POLYMER PROCESSING

Auteurs: António Gaspar-Cunha, José A. Covas, Janusz W. Sikora
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 43-46, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

Multi-Objective Robustness Analysis of the Polymer Extrusion Process

Auteurs: Costa, L-; Gaspar-Cunha, A.
Publié dans: International Conference on Uncertainty Quantification & Optimisation, 2020
Éditeur: Springer

MULTI-OBJECTIVE OPTIMIZATION OF SINGLE SCREW POLYMER EXTRUSION BASED ON ARTIFICIAL INTELLIGENCE

Auteurs: António Gaspar-Cunha, Francisco Monaco, Janusz W. Sikora, Alexandre Delbem
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 47-50, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

Numerical Evaluation of Distributive Mixing Capability of Single Screw Extruder With Rotational Barrel Segment

Auteurs: Gajdoš I., Spišák E., Greškovič F., Dulebová L., Sikora J
Publié dans: International Scientific Conference „PRO-TECH-MA 2020”, Numéro once a year, 2020, Page(s) 17-18
Éditeur: Rzeszów University of Technology

MACHINING OF MACHINE PARTS FOR THE NEWEX PROJECTS

Auteurs: Vladimír Hric, Radovan Jenčík, Ján Gabonay
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 37-42, ISBN 978-80-553-4073-9
Éditeur: Twechnical University of Kosice

A new solution of the plasticizing system of a single-screw extruder.

Auteurs: Sikora J.
Publié dans: XIV Scientific and Technical Conference „Directions of modification and application of polymers”, XXIII Professor Scientific Workshop, Numéro once a year, 2020
Éditeur: hindus

ACTIVITIES OF THE TECHNICAL UNIVERSITY OF KOŠICE TEAM IN THE NEWEX PROJECT

Auteurs: Ľudmila Dulebová
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 15-19, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

A CONCEPT FOR A NOVEL POLYMER EXTRUDER. PART II: ROTATIONAL BARREL SEGMENT

Auteurs: Hubert Dębski, Bolesław Kiszka, António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 78-87, ISBN 978-80-553-4073-9
Éditeur: Technical University of kosice

EXTRUSION COMPOUNDING OF POLYETHYLENE WITH BLOWING AGENTS

Auteurs: Carla I. Martins, José A Covas, Tiago Ferreira
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 129-132, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

SETTING THE OPTIMAL SHEET THICKNESS DISTRIBUTION FOR PLASTICS THERMOFORMING BY MULTI-OBJECTIVE OPTIMIZATION

Auteurs: António Gaspar-Cunha, Paulo Costa, Wagner de Campos Galuppo, João Miguel Nóbrega, Fernando Duarte, Lino Costa
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 55-58, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

The analysis of the present and new solutions of the adjustable grooved feed section of the extruder

Auteurs: Janusz W. Sikora, António Gaspar Cunha
Publié dans: PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia, Numéro once every two years, 2018, Page(s) 41
Éditeur: Ivane Javakhishvili Tbilisi Stte University

Microscopic evaluation of the halloysite nanotubes dispersion in the polyethylene matrix

Auteurs: Łukasz Majewskia, Ján Kamenický
Publié dans: PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia, Numéro once every two years, 2018, Page(s) 62
Éditeur: Ivane Javakhishvili Tbilisi Stte University

The influence of nanofillers on LDPE mechanical properties

Auteurs: Ľudmila Dulebová, Janusz W. Sikora, František Greškovič, Bogusław Kiszka
Publié dans: PRO-TECH-MA 2018 The Progressive Technologies and Materials, Numéro once a year, 2018, Page(s) 60-62, ISBN 978-83-7947-313-7
Éditeur: Lublin University of Technology

Radiation crosslinking of plastics in the automotive industry

Auteurs: František Greškovič, Emil Spišák, Ľudmila Dulebová
Publié dans: PRO-TECH-MA 2018 The Progressive Technologies and Materials, Numéro once a year, 2018, Page(s) 63-65, ISBN 978-83-7947-313-7
Éditeur: Lublin University of Technology

Investigation and development of new generation of machines for the processing of composite and nanocomposite materials

Auteurs: Janusz Sikora
Publié dans: XXII Profesorskie Warsztaty Naukowe PRZETWÓRSTWO TWORZYW POLIMEROWYCH, Numéro once a year, 2019, Page(s) 45, ISBN 978-83-942150-3-3
Éditeur: Divisia Sp. z o.o.

A New Solution of the Rotary Barrel Segment of a Single-screw Extrude

Auteurs: Janusz Sikora, Jan Varga
Publié dans: 6th International Caucasian Symposium on Polymers and Advanced Materials, Numéro once a year, 2019, Page(s) 99
Éditeur: Ivane Javakhishvili Tbilisi State University

Mechanical Properties of Low-density Polyethylene Without and With Compatibilizer

Auteurs: Ľudmila Dulebová, Janusz Sikora
Publié dans: "International Scientific Conference ""PRO-TECH-MA 2019""", Numéro once a year, 2019, Page(s) 23-24, ISBN 978-80-553-3357-1
Éditeur: Technical University of Košice

Utilization of Mesh Superposition Technique for Simulation of Single Screw Extruder

Auteurs: Ivan Gajdoš, Emil Spišák, Janusz Sikora, Volodymyr Krasinskyi
Publié dans: "International Scientific Conference ""PRO-TECH-MA 2019""", Numéro once a year, 2019, Page(s) 39-40, ISBN 978-80-553-3357-1
Éditeur: Technical University of Košice

A Numerical Analysis of the Screw of an Extruder for Polymer Materials

Auteurs: Hubert Dębski, Paweł Wysmulski
Publié dans: Eurogen 2019, Numéro once a year, 2019, Page(s) 1-5
Éditeur: University of Minho

Numerical analysis of the coupled thermal-stress strength of the active grooved feed zone in an innovative extruder for plastics

Auteurs: Mirosław Ferdynus
Publié dans: Eurogen 2019, Numéro once a year, 2019, Page(s) 1-5
Éditeur: University of Minho

A neuroevolutionary approach to feature selection using multiobjective evolutionary algorithms

Auteurs: Renê S. Pinto, Fernanda P. Costa, Lino A. Costa, Antonio Gaspar-Cunha
Publié dans: Eurogen 2019, Numéro once a year, 2019, Page(s) 1-6
Éditeur: University of Minho

3D Finite Elements Simulation of the Single Screw Extruder with Rotational Barrel Segment

Auteurs: Ivan Gajdoš, Janusz Sikora, Ľudmila Dulebová, Ján Varga
Publié dans: Eurogen 2019, Numéro once a year, 2019, Page(s) 1-4
Éditeur: University of Minho

A Review of Metallic Materials Used for Manufacturing Screws of Extrusion Machines and Methods of Increasing Their Durability

Auteurs: Anna Dziubińska, Janusz Sikora
Publié dans: "International Scientific Conference ""PRO-TECH-MA 2019""", Numéro once a year, 2019, Page(s) 29-30, ISBN 978-80-553-3357-1
Éditeur: Technical University of Košice

A New Generation of Extruders With an Active Grooved Feed Section

Auteurs: Janusz Sikora, Karolina Głogowska, Łukasz Majewski
Publié dans: "II International Scientific-Technical Conference ""The modern technologies of polymer materials obtaining and processing""", Numéro once every three years, 2019, Page(s) 43, ISBN 978-617-7726-89-9
Éditeur: Lviv Polytechnic National University

CFD Simulation of Rotational Barrel Segment Mixing Performance in Single Screw Extruder

Auteurs: Ivan Gajdoš, Jan Slota, Janusz Sikora Volodymyr Krasinskyi
Publié dans: "II International Scientific-Technical Conference ""The modern technologies of polymer materials obtaining and processing", Numéro once every three years, 2019, Page(s) 16, ISBN 978-617-7726-89-9
Éditeur: Lviv Polytechnic National University

Unconventional barrel designs of single-screw plasticizing systems

Auteurs: Majewski Łukasz, Sasimowski Emil
Publié dans: PRO-TECH-MA 2017 & SURFACE ENGINEERIG 2017, Numéro once a year, 2017, Page(s) 67-68, ISBN 978-80-553-3181-2
Éditeur: Technical University of Košice

NEWEX project - research issues and other activities

Auteurs: Sikora Janusz
Publié dans: PRO-TECH-MA 2017 & SURFACE ENGINEERIG 2017, Numéro once a year, 2017, Page(s) 86-87, ISBN 978-80-553-3181-2
Éditeur: Technical University of Košice

Investigation and development of a new generation of machines for the processing of composite and nanocomposite materials - NEWEX

Auteurs: Sikora Janusz, Hajek Jaroslav, Perhacova Alzbeta
Publié dans: XIII Science-Technical Conference 'Kierunki modyfikacji i zastosowań tworzyw polimerowych', Rydzyna 15 - 17.5.2017, Numéro once a year, 2017, Page(s) 94-95
Éditeur: Poznan University of Technology

The effect of adding nano-additives on the properties of thermoplastic polymers

Auteurs: Karolina Głogowska, Jaroslav Hajek, Stanislav Benco
Publié dans: PRO-TECH-MA 2017 – SURFACE ENGINEERING 2017, Numéro once a year, 2017, Page(s) 34-35, ISBN 978-80-553-3181-2
Éditeur: Technical University of Košice

INVESTIGATION AND DEVELOPMENT OF NEW GENERATION MACHINES FOR THE PROCESSING OF COMPOSITE AND NANOCOMPOSITE MATERIALS - Coordinator’s Report

Auteurs: Janusz W. Sikora
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 7-10, ISBN 978-80-553-4073-9
Éditeur: Technical University of Technology

PRESENTATION OF EXTRUDER FRAME AND SCREW

Auteurs: Mindaugas Karnickas
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 97-99, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

MECHANICAL PROPERTIES OF LDPE-MATRIX COMPOSITES WITH HALLOYSITE NANOTUBES

Auteurs: Ľudmila Dulebová, Janusz W. Sikora, Ján Varga
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 116-120, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

A CONCEPT FOR A NOVEL POLYMER EXTRUDER PART I: ACTIVE GROOVED FEED SECTION

Auteurs: Mirosław Ferdynus, Peter Chorovsky, Hubert Dębski
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Numéro once a year, 2022, Page(s) 67-77, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Auteurs: Ľudmila Dulebová, Janusz W. Sikora
Publié dans: Numéro vol. 4, 2021, Page(s) 281, ISBN 978-80-553-3817-0
Éditeur: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Auteurs: António Gaspar-Cunha, Janusz Sikora
Publié dans: Numéro Vol. 3, 2020, Page(s) 177, ISBN 978-989-99344-4-3
Éditeur: University of Minho

Technological and design aspects of the processing of composites and nanocomposites

Auteurs: Ľudmila Dulebová, Janusz W. Sikora, António Gaspar Cunha
Publié dans: Numéro Vol. 5, 2022, Page(s) pp. 142, ISBN 978-80-553-4073-9
Éditeur: Technical University of Kosice

Technological and design aspects of the processing of composities and nanocomposities.

Auteurs: Janusz W. Sikora, Ludmila Dulebova
Publié dans: Numéro Vol.1, 2018, Page(s) 193, ISBN 978-80553-2773-0
Éditeur: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Auteurs: Janusz W. Sikora, Ľudmila Dulebová
Publié dans: Numéro vol. 2, 2019, Page(s) 185, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Manufacturing characteristics of machine components for plastics processing on the example of the active grooved feed section of a single-screw extruder.

Auteurs: Majewski Ł., Glogowska K.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 56-71, ISBN 978-989-99344-4-3
Éditeur: University of Minho

Studying the cooling stage in fused filament fabrication

Auteurs: Covas J.A., Costa S.F., Duarte F.M.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 137-154, ISBN 978-989-99344-4-3
Éditeur: University of Minho

New concepts of a active grooved feed section for a new generation extruder – thermal and strength analysis

Auteurs: Ferdynus M., Sikora J., Perhacova A.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 42-55, ISBN 978-989-99344-4-3
Éditeur: Univeristy of Minho

Implementation of the plastication process in an innovative extrusion machine for the processing of composite and nanocomposite materials. Concept and implementation of control system of the extruder. Part III - Data Acquisition & Control System.

Auteurs: Janusz W. Sikora, Ľudmila Dulebová
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Numéro once a year, 2021, Page(s) 63-118, ISBN 978-80-553-3817-0
Éditeur: Technical University of Kosice

Auteurs: Karolina Głogowska, Emil Spišák, Marcin Buczaj
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Numéro once a year, 2021, Page(s) 7-34
Éditeur: Technical University of Kosice

Auteurs: Łukasz Majewski, Jan Varga, Andrzej Sumorek
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Numéro once a year, 2021, Page(s) 35-62, ISBN 978-80-553-3817-0
Éditeur: Technical University of Kosice

Using hybrid thermoforming to control the thickness distribution of the parts produced

Auteurs: Fernando M. Duarte, Catarina G. Ribeiro, João G. Ferreira, Sílvia A. Forte, José A. Covas
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Numéro once a year, 2021, Page(s) 195-210, ISBN 978-80-553-3817-0
Éditeur: Technical University of Technology

The impact of technological parameters of plastics extrusion process on products quality

Auteurs: Ľudmila Dulebová, Janusz W. Sikora, Volodymyr Moravskyi
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Numéro once a year, 2021, Page(s) 137-150, ISBN 978-80-553-3817-0
Éditeur: Technical University of kosice

Evaluation of adhesion wear of contact surfaces of molds

Auteurs: Dulebová L., Varga J., Greškovič F., Rudawska A.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 72-84, ISBN 978-989-99344-4-3
Éditeur: University of Minho

Simulation of extrusion based additive manufacturing technologies

Auteurs: Ivan Gajdoš, Emil Spišák, Volodymyr Krasinskyi
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Numéro once a year, 2021, Page(s) 151-164, ISBN 978-80-553-3817-0
Éditeur: Technical University of Kosice

Polymer single screw extruder optimization using Tchebycheff scalarization method and simulated annealing algorithm

Auteurs: Rocha A.M.A.C., Matos M.A., Costa M.F.P., Gaspar-Cunha A., Fernandes E.M.G.P.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 118-136, ISBN 978-989-99344-4-3
Éditeur: University of Minho

Optimization of conventional and barrier screws

Auteurs: António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Numéro once a year, 2021, Page(s) 165-178, ISBN 978-80-553-3817-0
Éditeur: Technical University of Technology

Monitoring of polymer extrusion and compounding processes

Auteurs: Covas J.A.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 154-177, ISBN 978-989-99344-4-3
Éditeur: University of Minho

New concepts of a active grooved feed section for a new generation extruder – CAD models.

Auteurs: Ferdynus M., Sikora J., Dulebová L.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once o year, 2020, Page(s) 7-41, ISBN 978-989-99344-4-3
Éditeur: University of Minho

In-line characterization of the dispersion of polymer nanocomposites during melt compounding

Auteurs: José A. Covas, Loic Hilliou
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Numéro once a year, 2021, Page(s) 179-194, ISBN 978-80-553-3817-0
Éditeur: Technical University of Technology

Evolving Neural Networks to Optimize Material Usage in Blow Molded Containers

Auteurs: Roman Denysiuk, Fernando M. Duarte, João P. Nunes, António Gaspar-Cunha
Publié dans: Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems, Numéro 49, 2019, Page(s) 501-511, ISBN 978-3-319-89889-6
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-89890-2_32

Modelling effect of grooved barrelson the performance of single screw extruders

Auteurs: A, Gaspar Cunha, Jose A. Covas, Janusz Sikora
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 22-42, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

Optimization of single screw extrusion

Auteurs: A. Gaspar-Cunha, José A. Covas, M. Fernanda P. Costa, Lino Costa
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 7-21, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

Modelling of flow and heat transfer, mixing and morphology development in plasticating single screw extrusion of polymer systems

Auteurs: José A. Covas, A Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 43-64, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

Effect of nanoclay on properties of polymer nanocomposites

Auteurs: Ľudmila Dulebová, José A. Covas
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 65-78, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

The mechanical properties of low-density polyethylene with nanofiller mass content

Auteurs: Ľudmila Dulebová, Anna Rudawska, A. Gaspar Cunha
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 79-90
Éditeur: Technical University of kosice

The effect of addition of nanotubes to the thermal properties and processing polyethylene

Auteurs: Karolina Głogowska, Łukasz Majewski
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 91-101, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

The analysis of the impact of a compatibilizer on the homogenisation of a LDPE/HNTs nanocomposite

Auteurs: Łukasz Majewski, Karolina Głogowska
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 102-117, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

Calculation of long fibers breaking and distribution in injection molded parts with CAE analysis

Auteurs: Ivan Gajdoš, Emil Spišák, František Greškovič, Janusz Sikora
Publié dans: Technological and design aspects of the processing of composites and nanocomposites, Numéro once a year, 2018, Page(s) 118-128, ISBN 978-80-553-2773-0
Éditeur: Technical University of Kosice

New concepts of a rotational barrel segment for a new generation extruder

Auteurs: Łukasz Majewski, Hubert Debski, Ľudmila Dulebová
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 19-60, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

The study influence of nanofillers on selected properties of nanocomposites

Auteurs: Ľudmila Dulebová, Ján Varga, Emil Spišák
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 7-18, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Simulation analysis of single screw extruder in Ansys Polyflow

Auteurs: Ivan Gajdoš, Janusz Sikora, Emil Spišák, František Greškovič
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 61-73, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Selected properties of polymer composite after radiation cross-linking

Auteurs: Ján Varga, Ľudmila Dulebová, Janusz W. Sikora
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 74-85, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Introduction to evolutionary multiobjective optimization

Auteurs: Lino A. Costa, Renê S. Pinto, António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 112-128, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Global Extruder Modelling: Active grooved feed section, rotational barrel segment and special screws

Auteurs: António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 97-111, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

New concepts of a special screw for a new generation extruder

Auteurs: Janusz W. Sikora, Paweł Wysmulski, Ján Varga
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 129-155, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

Computational assessment of the rotational barrel segment located on the meetering zone of an extruder

Auteurs: António Gaspar-Cunha
Publié dans: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Numéro once a year, 2019, Page(s) 86-96, ISBN 978-83-7947-378-6
Éditeur: Lublin University of Technology Publishing House

The application of CAM system in the production of selected parts of the innovative extruder.

Auteurs: Ján Varga, Łukasz Majewski
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Numéro once a year, 2021, Page(s) 119-136, ISBN 978-80-553-3817-0
Éditeur: Technical University of Kosice

The application of cam system as a tool in the production of extruder part

Auteurs: Varga J., Dulebová L., Sikora J.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 85-101, ISBN 978-989-99344-4-3
Éditeur: University of Minho

Mixing performance analysisof single screw extruder with rotational barrel segment

Auteurs: Gajdoš I., Sikora J., Spišák E., Glogowska K.
Publié dans: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Numéro once a year, 2020, Page(s) 102-117, ISBN 978-989-99344-4-3
Éditeur: University of Minho

The Application of Cam System as a Tool for the Production of SelectedParts for a New Generation of Extruder

Auteurs: Varga Ján, Dulebová Ľudmila, Sikora Janusz
Publié dans: Transfer inovácií, Numéro 43, 2021, Page(s) 33-36, ISSN 1337-7094
Éditeur: Technical University of Košice

Numerical Analysis of the New Concept of Screw of an Extruder for Polymer Materials

Auteurs: H. Debski, P. Wysmulski
Publié dans: Acta Mechanica Slovaca, Numéro 23/3, 2019, Page(s) 48-52, ISSN 1335-2393
Éditeur: Technical University of Kosice
DOI: 10.21496/ams.2020.002

The Effect of Adding Halloysite Nanotubes as Filler on the Mechanical Properties of Low-Density Polyethylene

Auteurs: Ľudmila Dulebová, Karolina Glogowska, Jaroslav Hájek, Jakub Fic
Publié dans: Materials Science Forum, Numéro 919, 2018, Page(s) 144-151, ISSN 1662-9752
Éditeur: © 2017 Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/msf.919.144

Evaluation of suitability of wheat bran as a natural filler in polymer processing

Auteurs: Majewski, Ł., Gaspar Cunha, A.
Publié dans: BioResources, Numéro 13(3), 2018, Page(s) 7037-7052, ISSN 1930-2126
Éditeur: North Carolina University
DOI: 10.15376/biores.13.3.7037-7052

Influence of HNT nano-additives on the hardness of the thermoplastic composites

Auteurs: Ľudmila Dulebová, Bogusław Kiszka, Martina Dulebová
Publié dans: Transfer inovácií, Numéro 36, 2017, Page(s) 22-25, ISSN 1337-7094
Éditeur: Technical University of Košice

Polyethylene-Matrix Composites with Halloysite Nanotubes with Enhanced Physical/Thermal Properties

Auteurs: Janusz W. Sikora, Ivan Gajdoš, Andrzej Puszka
Publié dans: Polymers, Numéro 11/5, 2019, Page(s) 787, ISSN 2073-4360
Éditeur: MDPI AG
DOI: 10.3390/polym11050787

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz II**). Właściwości mechaniczne i przetwórcze

Auteurs: Janusz Sikora
Publié dans: PRZEMYSŁ CHEMICZNY, Numéro 1/8, 2019, Page(s) 146-148, ISSN 0033-2496
Éditeur: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.22

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz. I. Charakterystyka procesu wytłaczania

Auteurs: Karolina Głogowska
Publié dans: PRZEMYSŁ CHEMICZNY, Numéro 1/8, 2019, Page(s) 143-145, ISSN 0033-2496
Éditeur: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.21

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz. III. Właściwości strukturalne

Auteurs: Łukasz Majewski
Publié dans: PRZEMYSŁ CHEMICZNY, Numéro 1/8, 2019, Page(s) 149-152, ISSN 0033-2496
Éditeur: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.23

Review of Unconventional Barrel Designs of Plasticizing Systems Used in Single-Screw Extruders

Auteurs: Łukasz Majewski Karolina Głogowska
Publié dans: INTERNATIONAL SCIENTIFIC JOURNAL INDUSTRY 4.0, Numéro 5, 2019, Page(s) 232-236, ISSN 2534-997X
Éditeur: SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING “INDUSTRY 4.0”

New Concepts for the Active Grooved-Feed Section Extruder

Auteurs: Karolina Głogowska Janusz Sikora Łukasz Majewski
Publié dans: INTERNATIONAL SCIENTIFIC JOURNAL INDUSTRY 4.0, Numéro 5, 2019, Page(s) 237-240, ISSN 2534-997X
Éditeur: SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING “INDUSTRY 4.0”

Analysis of the Mechanical Properties Change of PA6/MMT Nanocomposite System after Ageing

Auteurs: Ľudmila Dulebová, František Greškovič, Janusz W. Sikora, Volodymyr Krasinskyi
Publié dans: Key Engineering Materials, Numéro 756, 2017, Page(s) 52-59, ISSN 1662-9795
Éditeur: © 2017 Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/KEM.756.52

Analysis of Metallic Materials used for Manufacturing of Extruders Screws

Auteurs: Anna Dziubińska, Janusz Sikora
Publié dans: Acta Mechanica Slovaca, Numéro 23/3, 2019, Page(s) 36-41, ISSN 1335-2393
Éditeur: Technical University of Kosice
DOI: 10.21496/ams.2019.023

Vplyv simulovanych podmienok starnutia na tvrdost polymerneho kompozitu z PP matricou

Auteurs: Ľudmila Dulebová, Alžbeta Perháčová, Volodymyr Moravskyi, Volodymyr Krasinskyi
Publié dans: Plastics Production, Numéro 1, 2017, Page(s) 54-57, ISSN 1802-1549
Éditeur: Infocube s.r.o.

Vyskum a vyvoj generacie strojov pre spracovanie kompozitnych a nanokompozitnych materialov

Auteurs: Ľudmila Dulebová
Publié dans: Košice: Dnes, Numéro 5(85), 2018, Page(s) 8
Éditeur: Calameo

Nowe horyzonty na Wydziale Mechanicznym dzięki H2020

Auteurs: Janusz Sikora
Publié dans: Biuletyn Informacyjny POLITECHNIKI LUBELSKIEJ, Numéro 1(42), 2017, Page(s) 60, ISSN 1428-4014
Éditeur: Lublin University of Technology

Projekt NEWEX: nowa generacja maszyn powstaje pod kierunkiem naukowca z PL

Auteurs: Janusz Sikora
Publié dans: Kurier Lubelski, Numéro 220, 2018, Page(s) 06, ISSN 2353-6136
Éditeur: Poland Press Group

Mid-term meeting projektu NEWEX H2020

Auteurs: Ľudmila Dulebová
Publié dans: Haló, Numéro 4 (26), 2018, Page(s) 22, ISSN 2585-979X
Éditeur: Technical University of Kosice

H2020 - NEWEX projekt na Strojníckej fakulte

Auteurs: Ľudmila Dulebová
Publié dans: Haló, Numéro 4(25), 2017, Page(s) 31, ISSN 2585-979X
Éditeur: Technical University of Kosice

Spolupraca univerzit a priemyslu v projekte NEWEX na SjF

Auteurs: Ľudmila Dulebová
Publié dans: Haló, Numéro 1 (28), 2019, Page(s) 19, ISSN 2585-979X
Éditeur: Technical University of Kosice

Projekt NEWEX - wytłaczarka nowej generacji

Auteurs: Janusz Sikora
Publié dans: Tworzywa Sztuczne w Przemysle, Numéro 3 (10), 2019, Page(s) 128-129, ISSN 2082-6877
Éditeur: Media Tech s.c.

Droits de propriété intellectuelle

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: SK 00049-2019
Date: 2019-05-14
Demandeur(s): UNIVERSIDADE DO MINHO

Obrotowy segment układu uplastyczniającego wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429567
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Obrotowy segment układu uplastyczniającego wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429567
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra uplastyczniającego wytłaczarki (Adjusting mechanism of the plasticizing barrel of the extruder)

Numéro de demande/publication: PL P.425593
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de ajuste do cilindro ativo da extrusora

Numéro de demande/publication: PT 115417
Date: 2019-03-27
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14
Demandeur(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający (plasticizing sysstem)

Numéro de demande/publication: PL P.427532
Date: 2018-10-24
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: PL P.425590
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Numéro de demande/publication: PT 115417
Date: 2019-03-27
Demandeur(s): SEZ KROMPACHY AS

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: SK 00049-2019
Date: 2019-05-14

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: SK 00049-2019
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki

Numéro de demande/publication: PL P.429566
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Cylinder uplastyczniający (Platicizing barrel)

Numéro de demande/publication: PL P.427533
Date: 2018-10-24
Demandeur(s): POLITECHNIKA LUBELSKA

Wytłaczarka ślimakowa do tworzyw polimerowych (Screw extruder for polymers)

Numéro de demande/publication: PL P.422116
Date: 2017-07-04
Demandeur(s): POLITECHNIKA LUBELSKA

Ślimak wytłaczarki (Extruder's screw)

Numéro de demande/publication: PL P.422117
Date: 2017-07-04
Demandeur(s): POLITECHNIKA LUBELSKA

Wytłaczarka (Extruder)

Numéro de demande/publication: PL P.422114
Date: 2017-07-04
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14
Demandeur(s): SEZ KROMPACHY AS

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: SK 00049-2019
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14
Demandeur(s): UNIVERSIDADE DO MINHO

Układ uplastyczniający wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429561
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14
Demandeur(s): SEZ KROMPACHY AS

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Numéro de demande/publication: PT 115417
Date: 2019-03-27
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de ajuste do cilindro ajustável da extrusora monofuso.

Numéro de demande/publication: PT 115425
Date: 2019-04-05
Demandeur(s): POLITECHNIKA LUBELSKA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14

Mecanismo de ajuste do cilindro ajustável da extrusora monofuso.

Numéro de demande/publication: PT 115425
Date: 2019-04-05
Demandeur(s): UNIVERSIDADE DO MINHO

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: PL P.425592
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Aktywny układ uplastyczniający wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429568
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Numéro de demande/publication: PT 115417
Date: 2019-03-27
Demandeur(s): SEZ KROMPACHY AS

Aktywny segment układu uplastyczniającego wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429570
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki jednoślimakowej

Numéro de demande/publication: PL P.429561
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: SK 00049-2019
Date: 2019-05-14
Demandeur(s): SEZ KROMPACHY AS

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Numéro de demande/publication: PT 115148
Date: 2018-11-14

Wytłaczarka ślimakowa (Extruder's srew)

Numéro de demande/publication: PL P.422115
Date: 2017-07-04
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra nastawnego wytłaczarki jednoślimakowej (Adjusting mechanism of the adjustable barrel of a single-screw extruder)

Numéro de demande/publication: PL P.425591
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: PL P.425590
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14
Demandeur(s): SEZ KROMPACHY AS

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14
Demandeur(s): UNIVERSIDADE DO MINHO

Mechanizm regulacyjny cylindra uplastyczniającego wytłaczarki (Adjusting mechanism of the plasticizing barrel of the extruder)

Numéro de demande/publication: PL P.425593
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: PL P.425590
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Numéro de demande/publication: PL P.429569
Date: 2019-04-08
Demandeur(s): UZDAROJI AKCINE BENDROVE DIRMETA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: SK 00048-2019
Date: 2019-05-14
Demandeur(s): SEZ KROMPACHY AS

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: PL P.425592
Date: 2018-05-16
Demandeur(s): SEZ KROMPACHY AS

Wytłaczarka ślimakowa do tworzyw polimerowych (Screw extruder for polymers)

Numéro de demande/publication: PL P.422116
Date: 2017-07-04
Demandeur(s): POLITECHNIKA LUBELSKA

Cylinder uplastyczniający (Platicizing barrel)

Numéro de demande/publication: PL P.427533
Date: 2018-10-24
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra nastawnego wytłaczarki jednoślimakowej (Adjusting mechanism of the adjustable barrel of a single-screw extruder)

Numéro de demande/publication: PL P.425591
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki

Numéro de demande/publication: PL P.429566
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de plasticização da extrusora

Numéro de demande/publication: PT 115441
Date: 2019-04-10
Demandeur(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Numéro de demande/publication: PL P.429569
Date: 2019-04-08

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Numéro de demande/publication: PL P.425590
Date: 2018-05-16
Demandeur(s): SEZ KROMPACHY AS

Mecanismo de ajuste do cilindro de plasticização da extrusora

Numéro de demande/publication: PT 115441
Date: 2019-04-10
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de plasticização da extrusora

Numéro de demande/publication: PT 115441
Date: 2019-04-10
Demandeur(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Numéro de demande/publication: PL P.425592
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Numéro de demande/publication: PL P.429569
Date: 2019-04-08
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Numéro de demande/publication: PL W.127342
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de plasticização.

Numéro de demande/publication: PT 11875
Date: 2019-05-14

Mecanismo de plasticização da extrusora.

Numéro de demande/publication: PT 11876
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki jednoślimakowej (Plasticizing mechanism of the single-screw extruder)

Numéro de demande/publication: PL W.127343
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Numéro de demande/publication: PL W.127341
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização da extrusora.

Numéro de demande/publication: PT 11876
Date: 2019-05-14
Demandeur(s): UNIVERSIDADE DO MINHO

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Numéro de demande/publication: PL W.127342
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Numéro de demande/publication: PL W.127341
Date: 2018-05-16

Mecanismo de plasticização da extrusora.

Numéro de demande/publication: PT 11876
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Numéro de demande/publication: PL W.127341
Date: 2018-05-16
Demandeur(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Numéro de demande/publication: PL W.127342
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização da extrusora monofuso

Numéro de demande/publication: PT 11877
Date: 2019-05-14

Mecanismo de plasticização da extrusora monofuso

Numéro de demande/publication: PT 11877
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

Mecanismo de plasticização da extrusora monofuso

Numéro de demande/publication: PT 11877
Date: 2019-05-14
Demandeur(s): UNIVERSIDADE DO MINHO

Urządzenie uplastyczniające wytłaczarki jednoślimakowej (Plasticizing mechanism of the single-screw extruder)

Numéro de demande/publication: PL W.127343
Date: 2018-05-16
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização.

Numéro de demande/publication: PT 11875
Date: 2019-05-14
Demandeur(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização.

Numéro de demande/publication: PT 11875
Date: 2019-05-14
Demandeur(s): POLITECHNIKA LUBELSKA

NewEX H2020-MSCA-RISE-2017

Numéro de demande/publication: PL Z.467447
Date: 2017-02-10
Demandeur(s): POLITECHNIKA LUBELSKA

Recherche de données OpenAIRE...

Livrables

Publications

Droits de propriété intellectuelle

Partager cette page

Télécharger