Investigation and development of a new generation of machines for the processing of composite and nanocomposites materials

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Training materials for T5.1, T5.2 workshops and e-Learning

Training materials of all T51 and T52 workshops elaborated and available in pdf format on the NEWEX website within 2 weeks after each workshop Tests form of quiz dedicated to all workshop participants NEWEX participants researchers students experts prepared and evaluated by trainers within 1 month after each workshopSummary internal reports and description of results on months 1 7 20 26 41Lead Beneficiary all Partners

Articles for scientific publications

Some professional periodicals were chosen to publish the results of the NEWEX projectDuring project the received results of NEWEX project will be systematically published in peerreview magazines 12 per year as well as presented and discussed at international and national conferences 12 per year Lead Beneficiary all Partners

e-Learning platform

eLearning platform MOODLE based for dedicated to evaluation and share ofknowledge gained mainly during the workshops in the form of quiz set ofquestions problems for analysis and discussion established at the earlystage of NEWEX updated regularly after each workshop evaluation ofstudents results within 1 month after each workshop Summary report of installation configuration presentation to users onmonth 3

Training materials on T5.3 inter-sector and international cooperation

Training materials on all T54 workshops elaborated and available in pdf format on the NEWEX websitewithin 2 weeks after each workshop Summary reports on months 3 12 14 20 30 41Lead Beneficiary all Partners

Rotational barrel segment in metal

The best chosen model of rotational barrel segment will be made by SME.

Special screw in metal

The best chosen model of special screw will be made by SME.

New extruder prototype (pilot)

The chosen active grooved feed section, rotational barrel segment, special screw, automation and control system as well as auxiliary elements will be used to make a new, prototype extruder.

Physical models (3D print.) of extruder elements

A physical model of the plasticizing system will be made and will consist of the best chosen IAGFS, ORBS and SS.

Active grooved feed section in metal

The best chosen model of active grooved feed section will be made by SME.

Automation and control system

Automation and control system will be chosen in such a way as to fulfil the requirements and will constitute the equipment of the new extruder

Auxiliary elements of new extruder

Auxiliary elements of the new extruder will be adjusted: temperature and pressure sensors, heating elements, motor, hopper, elements of the barrel, extruder head etc.

Comparative research results

A detailed comparative analysis of the results received at the standard extruder and at the new extruder as well as the process and product advantages of the latter one will be determined

New extruder and extrusion process test results

Studies will be conducted of the new extruder and extrusion process ad will include the measurement of the distribution of the pressure p MPa and temperature T oC of the polymer along the plasticizing system and extruder head torque at the screw M Nm extrudate mass m kg time of energy measurement te s time of extrudate measurement tex s temperature of the extrudate T oC extrusion speed V ms as well as unit energy consumption EEC Jkg energy efficiency polymer output G kgh die swell power supplied to the extruder QC W power transferred by the polymer QN W

Extrudate properties report

Studies will be conducted of the extrudate received at the new extruder and the following will be determined Youngs modulus E MPa ultimate tensile stress M MPa breaking stress r MPa strain at ultimate stress M strain at break r impact strength U kJm2 hardness H oSh melt flow index MFR g10minand MVR cm310min heat deflection temperature HDT oC linear shrinkage S temperature of phase transitions degree of crystallinity enthalpy relationship of the specific volume to temperature and pressure degree of polymer homogenization microscope laboratory studies of the material structure

Publications

PRESENTATION OF COMPANY DIRMETA

Author(s): Povilas Padleckas
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 20-23, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

PRESENTATION SEZ KROMPACHY, a.s., SLOVAKIA

Author(s): Ján Gabonay
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 31-36, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

CHARACTERISTICS OF SOLID AND POROUS INJECTION MOLDED PARTS WITH WELD LINE AREAS

Author(s): Elżbieta Bociaga
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 104-107, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

THE PRODUCTION OF METAL PARTS OF A NEW TYPE OF EXTRUDER

Author(s): Ján Varga, Ľudmila Dulebová, Janusz W. Sikora
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 88-91, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

CHARACTERISTICS OF THE EXTRUSION PROCESS AND PROPERTIES OF NANOCOMPOSITES BASED ON POLYETHYLENE WITH THE ADDITION OF HALLOYSITE NANOTUBES

Author(s): Łukasz Majewski
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 133-136, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

COMPARISON OF THE EXTRUSION PROCESS AND PROPERTIES OF NANOCOMPOSITES OBTAINED ON THE BASIS OF POLYETHYLENE USING A NEW GENERATION AND STANDARD EXTRUDER

Author(s): Janusz W. Sikora, Povilas Padleckas, Ján Gabonay, Ľudmila Dulebová
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 110-115, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

CAE ANALYSIS OF DISTRIBUTIVE AND DISPERSIVE MIXING IN ROTATIONAL BARREL SEGMENT

Author(s): Ivan Gajdoš, Emil Spišák, Volodymyr Krasynskyi
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 100-103, ISBN 978-80-553-4073-9
Publisher: Technical University Of Kosice

PRESENTATION OF FACULTY OF MECHANICAL ENGINEERING OF LUBLIN UNIVERSITY OF TECHNOLOGY

Author(s): Anna Rudwska
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 11-14, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

PRESENTATION OF CAD/CAM PRODUCTION CAPABILITIES OF TOOL ROOM SEZ KROMPACHY A.S.

Author(s): Vladimír Hric, Radovan Jenčík, Peter Chorovský, Jozef Humeňanský
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 37-42, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

PRESENTATION OF THE LUBLIN UNIVERSITY OF TECHNOLOGY

Author(s): Beata Kijak-Mitura
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 24-30, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

DATA CLUSTERING PROCEDURES: A GENERAL REVIEW

Author(s): A. Manuela Gonçalves, António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 59-62, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

IN-PROCESS MEASUREMENTS IN POLYMER EXTRUSION

Author(s): José A. Covas
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 108-109, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

MULTI-OBJECTIVE POLYMER SINGLE SCREW EXTRUDER OPTIMIZATION

Author(s): Ana Maria A. C. Rocha, M. Fernanda P. Costa, A. Gaspar-Cunha, Edite M. G. P. Fernandes
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 63-67, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

A PENALTY SCHEME FOR THE TCHEBYCHEFF SCALARIZATION METHOD TO OPTIMIZE THE SINGLE SCREW EXTRUSION

Author(s): Ana Maria A. C. Rocha, M. Fernanda P. Costa, A. Gaspar-Cunha, Edite M. G. P. Fernandes
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 51-54, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

NANOCOMPOSITES BASED ON POLYAMIDE-6 AND MONTMORILLONITE INTERCALATED WITH POLYVINYLPYRROLIDONE

Author(s): Volodymyr Krasinskyi, Janusz W. Sikora, Oleh Suberlyak
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 125-128, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

EXTRUSION-COOKING TECHNOLOGY IN FOOD PRODUCTION - RAW MATERIALS AND APPLICATIONS

Author(s): Aneta Bobryk-Mamczarz, Paweł Głowacki
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 121-124, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

New Generation of Extruders with Active Grooved Feed Section andRotational Barrel Segment

Author(s): Janusz Sikora
Published in: 36 International Conference of the Polymer Processing Society, Issue once a year, 2021, Page(s) S01-720
Publisher: The Polymer Processing Society

A REVIEW ON OPTIMIZATION IN POLYMER PROCESSING

Author(s): António Gaspar-Cunha, José A. Covas, Janusz W. Sikora
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 43-46, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

Multi-Objective Robustness Analysis of the Polymer Extrusion Process

Author(s): Costa, L-; Gaspar-Cunha, A.
Published in: International Conference on Uncertainty Quantification & Optimisation, 2020
Publisher: Springer

MULTI-OBJECTIVE OPTIMIZATION OF SINGLE SCREW POLYMER EXTRUSION BASED ON ARTIFICIAL INTELLIGENCE

Author(s): António Gaspar-Cunha, Francisco Monaco, Janusz W. Sikora, Alexandre Delbem
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 47-50, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

Numerical Evaluation of Distributive Mixing Capability of Single Screw Extruder With Rotational Barrel Segment

Author(s): Gajdoš I., Spišák E., Greškovič F., Dulebová L., Sikora J
Published in: International Scientific Conference „PRO-TECH-MA 2020”, Issue once a year, 2020, Page(s) 17-18
Publisher: Rzeszów University of Technology

MACHINING OF MACHINE PARTS FOR THE NEWEX PROJECTS

Author(s): Vladimír Hric, Radovan Jenčík, Ján Gabonay
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 37-42, ISBN 978-80-553-4073-9
Publisher: Twechnical University of Kosice

A new solution of the plasticizing system of a single-screw extruder.

Author(s): Sikora J.
Published in: XIV Scientific and Technical Conference „Directions of modification and application of polymers”, XXIII Professor Scientific Workshop, Issue once a year, 2020
Publisher: hindus

ACTIVITIES OF THE TECHNICAL UNIVERSITY OF KOŠICE TEAM IN THE NEWEX PROJECT

Author(s): Ľudmila Dulebová
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 15-19, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

A CONCEPT FOR A NOVEL POLYMER EXTRUDER. PART II: ROTATIONAL BARREL SEGMENT

Author(s): Hubert Dębski, Bolesław Kiszka, António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 78-87, ISBN 978-80-553-4073-9
Publisher: Technical University of kosice

EXTRUSION COMPOUNDING OF POLYETHYLENE WITH BLOWING AGENTS

Author(s): Carla I. Martins, José A Covas, Tiago Ferreira
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 129-132, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

SETTING THE OPTIMAL SHEET THICKNESS DISTRIBUTION FOR PLASTICS THERMOFORMING BY MULTI-OBJECTIVE OPTIMIZATION

Author(s): António Gaspar-Cunha, Paulo Costa, Wagner de Campos Galuppo, João Miguel Nóbrega, Fernando Duarte, Lino Costa
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 55-58, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

The analysis of the present and new solutions of the adjustable grooved feed section of the extruder

Author(s): Janusz W. Sikora, António Gaspar Cunha
Published in: PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia, Issue once every two years, 2018, Page(s) 41
Publisher: Ivane Javakhishvili Tbilisi Stte University

Microscopic evaluation of the halloysite nanotubes dispersion in the polyethylene matrix

Author(s): Łukasz Majewskia, Ján Kamenický
Published in: PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia, Issue once every two years, 2018, Page(s) 62
Publisher: Ivane Javakhishvili Tbilisi Stte University

The influence of nanofillers on LDPE mechanical properties

Author(s): Ľudmila Dulebová, Janusz W. Sikora, František Greškovič, Bogusław Kiszka
Published in: PRO-TECH-MA 2018 The Progressive Technologies and Materials, Issue once a year, 2018, Page(s) 60-62, ISBN 978-83-7947-313-7
Publisher: Lublin University of Technology

Radiation crosslinking of plastics in the automotive industry

Author(s): František Greškovič, Emil Spišák, Ľudmila Dulebová
Published in: PRO-TECH-MA 2018 The Progressive Technologies and Materials, Issue once a year, 2018, Page(s) 63-65, ISBN 978-83-7947-313-7
Publisher: Lublin University of Technology

Investigation and development of new generation of machines for the processing of composite and nanocomposite materials

Author(s): Janusz Sikora
Published in: XXII Profesorskie Warsztaty Naukowe PRZETWÓRSTWO TWORZYW POLIMEROWYCH, Issue once a year, 2019, Page(s) 45, ISBN 978-83-942150-3-3
Publisher: Divisia Sp. z o.o.

A New Solution of the Rotary Barrel Segment of a Single-screw Extrude

Author(s): Janusz Sikora, Jan Varga
Published in: 6th International Caucasian Symposium on Polymers and Advanced Materials, Issue once a year, 2019, Page(s) 99
Publisher: Ivane Javakhishvili Tbilisi State University

Mechanical Properties of Low-density Polyethylene Without and With Compatibilizer

Author(s): Ľudmila Dulebová, Janusz Sikora
Published in: "International Scientific Conference ""PRO-TECH-MA 2019""", Issue once a year, 2019, Page(s) 23-24, ISBN 978-80-553-3357-1
Publisher: Technical University of Košice

Utilization of Mesh Superposition Technique for Simulation of Single Screw Extruder

Author(s): Ivan Gajdoš, Emil Spišák, Janusz Sikora, Volodymyr Krasinskyi
Published in: "International Scientific Conference ""PRO-TECH-MA 2019""", Issue once a year, 2019, Page(s) 39-40, ISBN 978-80-553-3357-1
Publisher: Technical University of Košice

A Numerical Analysis of the Screw of an Extruder for Polymer Materials

Author(s): Hubert Dębski, Paweł Wysmulski
Published in: Eurogen 2019, Issue once a year, 2019, Page(s) 1-5
Publisher: University of Minho

Numerical analysis of the coupled thermal-stress strength of the active grooved feed zone in an innovative extruder for plastics

Author(s): Mirosław Ferdynus
Published in: Eurogen 2019, Issue once a year, 2019, Page(s) 1-5
Publisher: University of Minho

A neuroevolutionary approach to feature selection using multiobjective evolutionary algorithms

Author(s): Renê S. Pinto, Fernanda P. Costa, Lino A. Costa, Antonio Gaspar-Cunha
Published in: Eurogen 2019, Issue once a year, 2019, Page(s) 1-6
Publisher: University of Minho

3D Finite Elements Simulation of the Single Screw Extruder with Rotational Barrel Segment

Author(s): Ivan Gajdoš, Janusz Sikora, Ľudmila Dulebová, Ján Varga
Published in: Eurogen 2019, Issue once a year, 2019, Page(s) 1-4
Publisher: University of Minho

A Review of Metallic Materials Used for Manufacturing Screws of Extrusion Machines and Methods of Increasing Their Durability

Author(s): Anna Dziubińska, Janusz Sikora
Published in: "International Scientific Conference ""PRO-TECH-MA 2019""", Issue once a year, 2019, Page(s) 29-30, ISBN 978-80-553-3357-1
Publisher: Technical University of Košice

A New Generation of Extruders With an Active Grooved Feed Section

Author(s): Janusz Sikora, Karolina Głogowska, Łukasz Majewski
Published in: "II International Scientific-Technical Conference ""The modern technologies of polymer materials obtaining and processing""", Issue once every three years, 2019, Page(s) 43, ISBN 978-617-7726-89-9
Publisher: Lviv Polytechnic National University

CFD Simulation of Rotational Barrel Segment Mixing Performance in Single Screw Extruder

Author(s): Ivan Gajdoš, Jan Slota, Janusz Sikora Volodymyr Krasinskyi
Published in: "II International Scientific-Technical Conference ""The modern technologies of polymer materials obtaining and processing", Issue once every three years, 2019, Page(s) 16, ISBN 978-617-7726-89-9
Publisher: Lviv Polytechnic National University

Unconventional barrel designs of single-screw plasticizing systems

Author(s): Majewski Łukasz, Sasimowski Emil
Published in: PRO-TECH-MA 2017 & SURFACE ENGINEERIG 2017, Issue once a year, 2017, Page(s) 67-68, ISBN 978-80-553-3181-2
Publisher: Technical University of Košice

NEWEX project - research issues and other activities

Author(s): Sikora Janusz
Published in: PRO-TECH-MA 2017 & SURFACE ENGINEERIG 2017, Issue once a year, 2017, Page(s) 86-87, ISBN 978-80-553-3181-2
Publisher: Technical University of Košice

Investigation and development of a new generation of machines for the processing of composite and nanocomposite materials - NEWEX

Author(s): Sikora Janusz, Hajek Jaroslav, Perhacova Alzbeta
Published in: XIII Science-Technical Conference 'Kierunki modyfikacji i zastosowań tworzyw polimerowych', Rydzyna 15 - 17.5.2017, Issue once a year, 2017, Page(s) 94-95
Publisher: Poznan University of Technology

The effect of adding nano-additives on the properties of thermoplastic polymers

Author(s): Karolina Głogowska, Jaroslav Hajek, Stanislav Benco
Published in: PRO-TECH-MA 2017 – SURFACE ENGINEERING 2017, Issue once a year, 2017, Page(s) 34-35, ISBN 978-80-553-3181-2
Publisher: Technical University of Košice

INVESTIGATION AND DEVELOPMENT OF NEW GENERATION MACHINES FOR THE PROCESSING OF COMPOSITE AND NANOCOMPOSITE MATERIALS - Coordinator’s Report

Author(s): Janusz W. Sikora
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 7-10, ISBN 978-80-553-4073-9
Publisher: Technical University of Technology

PRESENTATION OF EXTRUDER FRAME AND SCREW

Author(s): Mindaugas Karnickas
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 97-99, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

MECHANICAL PROPERTIES OF LDPE-MATRIX COMPOSITES WITH HALLOYSITE NANOTUBES

Author(s): Ľudmila Dulebová, Janusz W. Sikora, Ján Varga
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 116-120, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

A CONCEPT FOR A NOVEL POLYMER EXTRUDER PART I: ACTIVE GROOVED FEED SECTION

Author(s): Mirosław Ferdynus, Peter Chorovsky, Hubert Dębski
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume V, Issue once a year, 2022, Page(s) 67-77, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Author(s): Ľudmila Dulebová, Janusz W. Sikora
Published in: Issue vol. 4, 2021, Page(s) 281, ISBN 978-80-553-3817-0
Publisher: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Author(s): António Gaspar-Cunha, Janusz Sikora
Published in: Issue Vol. 3, 2020, Page(s) 177, ISBN 978-989-99344-4-3
Publisher: University of Minho

Technological and design aspects of the processing of composites and nanocomposites

Author(s): Ľudmila Dulebová, Janusz W. Sikora, António Gaspar Cunha
Published in: Issue Vol. 5, 2022, Page(s) pp. 142, ISBN 978-80-553-4073-9
Publisher: Technical University of Kosice

Technological and design aspects of the processing of composities and nanocomposities.

Author(s): Janusz W. Sikora, Ludmila Dulebova
Published in: Issue Vol.1, 2018, Page(s) 193, ISBN 978-80553-2773-0
Publisher: Technical University of Kosice

Technological and design aspects of the processing of composites and nanocomposites

Author(s): Janusz W. Sikora, Ľudmila Dulebová
Published in: Issue vol. 2, 2019, Page(s) 185, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Manufacturing characteristics of machine components for plastics processing on the example of the active grooved feed section of a single-screw extruder.

Author(s): Majewski Ł., Glogowska K.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 56-71, ISBN 978-989-99344-4-3
Publisher: University of Minho

Studying the cooling stage in fused filament fabrication

Author(s): Covas J.A., Costa S.F., Duarte F.M.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 137-154, ISBN 978-989-99344-4-3
Publisher: University of Minho

New concepts of a active grooved feed section for a new generation extruder – thermal and strength analysis

Author(s): Ferdynus M., Sikora J., Perhacova A.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 42-55, ISBN 978-989-99344-4-3
Publisher: Univeristy of Minho

Implementation of the plastication process in an innovative extrusion machine for the processing of composite and nanocomposite materials. Concept and implementation of control system of the extruder. Part III - Data Acquisition & Control System.

Author(s): Janusz W. Sikora, Ľudmila Dulebová
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Issue once a year, 2021, Page(s) 63-118, ISBN 978-80-553-3817-0
Publisher: Technical University of Kosice

Author(s): Karolina Głogowska, Emil Spišák, Marcin Buczaj
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Issue once a year, 2021, Page(s) 7-34
Publisher: Technical University of Kosice

Author(s): Łukasz Majewski, Jan Varga, Andrzej Sumorek
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Issue once a year, 2021, Page(s) 35-62, ISBN 978-80-553-3817-0
Publisher: Technical University of Kosice

Using hybrid thermoforming to control the thickness distribution of the parts produced

Author(s): Fernando M. Duarte, Catarina G. Ribeiro, João G. Ferreira, Sílvia A. Forte, José A. Covas
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Issue once a year, 2021, Page(s) 195-210, ISBN 978-80-553-3817-0
Publisher: Technical University of Technology

The impact of technological parameters of plastics extrusion process on products quality

Author(s): Ľudmila Dulebová, Janusz W. Sikora, Volodymyr Moravskyi
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Issue once a year, 2021, Page(s) 137-150, ISBN 978-80-553-3817-0
Publisher: Technical University of kosice

Evaluation of adhesion wear of contact surfaces of molds

Author(s): Dulebová L., Varga J., Greškovič F., Rudawska A.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 72-84, ISBN 978-989-99344-4-3
Publisher: University of Minho

Simulation of extrusion based additive manufacturing technologies

Author(s): Ivan Gajdoš, Emil Spišák, Volodymyr Krasinskyi
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Issue once a year, 2021, Page(s) 151-164, ISBN 978-80-553-3817-0
Publisher: Technical University of Kosice

Polymer single screw extruder optimization using Tchebycheff scalarization method and simulated annealing algorithm

Author(s): Rocha A.M.A.C., Matos M.A., Costa M.F.P., Gaspar-Cunha A., Fernandes E.M.G.P.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 118-136, ISBN 978-989-99344-4-3
Publisher: University of Minho

Optimization of conventional and barrier screws

Author(s): António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Issue once a year, 2021, Page(s) 165-178, ISBN 978-80-553-3817-0
Publisher: Technical University of Technology

Monitoring of polymer extrusion and compounding processes

Author(s): Covas J.A.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 154-177, ISBN 978-989-99344-4-3
Publisher: University of Minho

New concepts of a active grooved feed section for a new generation extruder – CAD models.

Author(s): Ferdynus M., Sikora J., Dulebová L.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once o year, 2020, Page(s) 7-41, ISBN 978-989-99344-4-3
Publisher: University of Minho

In-line characterization of the dispersion of polymer nanocomposites during melt compounding

Author(s): José A. Covas, Loic Hilliou
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV, Issue once a year, 2021, Page(s) 179-194, ISBN 978-80-553-3817-0
Publisher: Technical University of Technology

Evolving Neural Networks to Optimize Material Usage in Blow Molded Containers

Author(s): Roman Denysiuk, Fernando M. Duarte, João P. Nunes, António Gaspar-Cunha
Published in: Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems, Issue 49, 2019, Page(s) 501-511, ISBN 978-3-319-89889-6
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-89890-2_32

Modelling effect of grooved barrelson the performance of single screw extruders

Author(s): A, Gaspar Cunha, Jose A. Covas, Janusz Sikora
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 22-42, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

Optimization of single screw extrusion

Author(s): A. Gaspar-Cunha, José A. Covas, M. Fernanda P. Costa, Lino Costa
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 7-21, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

Modelling of flow and heat transfer, mixing and morphology development in plasticating single screw extrusion of polymer systems

Author(s): José A. Covas, A Gaspar-Cunha
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 43-64, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

Effect of nanoclay on properties of polymer nanocomposites

Author(s): Ľudmila Dulebová, José A. Covas
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 65-78, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

The mechanical properties of low-density polyethylene with nanofiller mass content

Author(s): Ľudmila Dulebová, Anna Rudawska, A. Gaspar Cunha
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 79-90
Publisher: Technical University of kosice

The effect of addition of nanotubes to the thermal properties and processing polyethylene

Author(s): Karolina Głogowska, Łukasz Majewski
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 91-101, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

The analysis of the impact of a compatibilizer on the homogenisation of a LDPE/HNTs nanocomposite

Author(s): Łukasz Majewski, Karolina Głogowska
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 102-117, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

Calculation of long fibers breaking and distribution in injection molded parts with CAE analysis

Author(s): Ivan Gajdoš, Emil Spišák, František Greškovič, Janusz Sikora
Published in: Technological and design aspects of the processing of composites and nanocomposites, Issue once a year, 2018, Page(s) 118-128, ISBN 978-80-553-2773-0
Publisher: Technical University of Kosice

New concepts of a rotational barrel segment for a new generation extruder

Author(s): Łukasz Majewski, Hubert Debski, Ľudmila Dulebová
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 19-60, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

The study influence of nanofillers on selected properties of nanocomposites

Author(s): Ľudmila Dulebová, Ján Varga, Emil Spišák
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 7-18, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Simulation analysis of single screw extruder in Ansys Polyflow

Author(s): Ivan Gajdoš, Janusz Sikora, Emil Spišák, František Greškovič
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 61-73, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Selected properties of polymer composite after radiation cross-linking

Author(s): Ján Varga, Ľudmila Dulebová, Janusz W. Sikora
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 74-85, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Introduction to evolutionary multiobjective optimization

Author(s): Lino A. Costa, Renê S. Pinto, António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 112-128, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Global Extruder Modelling: Active grooved feed section, rotational barrel segment and special screws

Author(s): António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 97-111, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

New concepts of a special screw for a new generation extruder

Author(s): Janusz W. Sikora, Paweł Wysmulski, Ján Varga
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 129-155, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

Computational assessment of the rotational barrel segment located on the meetering zone of an extruder

Author(s): António Gaspar-Cunha
Published in: Technological and design aspects of the processing of composites and nanocomposites. Volume II, Issue once a year, 2019, Page(s) 86-96, ISBN 978-83-7947-378-6
Publisher: Lublin University of Technology Publishing House

The application of CAM system in the production of selected parts of the innovative extruder.

Author(s): Ján Varga, Łukasz Majewski
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume IV., Issue once a year, 2021, Page(s) 119-136, ISBN 978-80-553-3817-0
Publisher: Technical University of Kosice

The application of cam system as a tool in the production of extruder part

Author(s): Varga J., Dulebová L., Sikora J.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 85-101, ISBN 978-989-99344-4-3
Publisher: University of Minho

Mixing performance analysisof single screw extruder with rotational barrel segment

Author(s): Gajdoš I., Sikora J., Spišák E., Glogowska K.
Published in: Technological and design aspects of the processing of composities and nanocomposities. Volume III., Issue once a year, 2020, Page(s) 102-117, ISBN 978-989-99344-4-3
Publisher: University of Minho

The Application of Cam System as a Tool for the Production of SelectedParts for a New Generation of Extruder

Author(s): Varga Ján, Dulebová Ľudmila, Sikora Janusz
Published in: Transfer inovácií, Issue 43, 2021, Page(s) 33-36, ISSN 1337-7094
Publisher: Technical University of Košice

Numerical Analysis of the New Concept of Screw of an Extruder for Polymer Materials

Author(s): H. Debski, P. Wysmulski
Published in: Acta Mechanica Slovaca, Issue 23/3, 2019, Page(s) 48-52, ISSN 1335-2393
Publisher: Technical University of Kosice
DOI: 10.21496/ams.2020.002

The Effect of Adding Halloysite Nanotubes as Filler on the Mechanical Properties of Low-Density Polyethylene

Author(s): Ľudmila Dulebová, Karolina Glogowska, Jaroslav Hájek, Jakub Fic
Published in: Materials Science Forum, Issue 919, 2018, Page(s) 144-151, ISSN 1662-9752
Publisher: © 2017 Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/msf.919.144

Evaluation of suitability of wheat bran as a natural filler in polymer processing

Author(s): Majewski, Ł., Gaspar Cunha, A.
Published in: BioResources, Issue 13(3), 2018, Page(s) 7037-7052, ISSN 1930-2126
Publisher: North Carolina University
DOI: 10.15376/biores.13.3.7037-7052

Influence of HNT nano-additives on the hardness of the thermoplastic composites

Author(s): Ľudmila Dulebová, Bogusław Kiszka, Martina Dulebová
Published in: Transfer inovácií, Issue 36, 2017, Page(s) 22-25, ISSN 1337-7094
Publisher: Technical University of Košice

Polyethylene-Matrix Composites with Halloysite Nanotubes with Enhanced Physical/Thermal Properties

Author(s): Janusz W. Sikora, Ivan Gajdoš, Andrzej Puszka
Published in: Polymers, Issue 11/5, 2019, Page(s) 787, ISSN 2073-4360
Publisher: MDPI AG
DOI: 10.3390/polym11050787

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz II**). Właściwości mechaniczne i przetwórcze

Author(s): Janusz Sikora
Published in: PRZEMYSŁ CHEMICZNY, Issue 1/8, 2019, Page(s) 146-148, ISSN 0033-2496
Publisher: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.22

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz. I. Charakterystyka procesu wytłaczania

Author(s): Karolina Głogowska
Published in: PRZEMYSŁ CHEMICZNY, Issue 1/8, 2019, Page(s) 143-145, ISSN 0033-2496
Publisher: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.21

Studium wytłaczania polietylenu z dodatkiem nanorurek haloizytowych. Cz. III. Właściwości strukturalne

Author(s): Łukasz Majewski
Published in: PRZEMYSŁ CHEMICZNY, Issue 1/8, 2019, Page(s) 149-152, ISSN 0033-2496
Publisher: Wydawnictwo SIGMA
DOI: 10.15199/62.2019.8.23

Review of Unconventional Barrel Designs of Plasticizing Systems Used in Single-Screw Extruders

Author(s): Łukasz Majewski Karolina Głogowska
Published in: INTERNATIONAL SCIENTIFIC JOURNAL INDUSTRY 4.0, Issue 5, 2019, Page(s) 232-236, ISSN 2534-997X
Publisher: SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING “INDUSTRY 4.0”

New Concepts for the Active Grooved-Feed Section Extruder

Author(s): Karolina Głogowska Janusz Sikora Łukasz Majewski
Published in: INTERNATIONAL SCIENTIFIC JOURNAL INDUSTRY 4.0, Issue 5, 2019, Page(s) 237-240, ISSN 2534-997X
Publisher: SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING “INDUSTRY 4.0”

Analysis of the Mechanical Properties Change of PA6/MMT Nanocomposite System after Ageing

Author(s): Ľudmila Dulebová, František Greškovič, Janusz W. Sikora, Volodymyr Krasinskyi
Published in: Key Engineering Materials, Issue 756, 2017, Page(s) 52-59, ISSN 1662-9795
Publisher: © 2017 Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/KEM.756.52

Analysis of Metallic Materials used for Manufacturing of Extruders Screws

Author(s): Anna Dziubińska, Janusz Sikora
Published in: Acta Mechanica Slovaca, Issue 23/3, 2019, Page(s) 36-41, ISSN 1335-2393
Publisher: Technical University of Kosice
DOI: 10.21496/ams.2019.023

Vplyv simulovanych podmienok starnutia na tvrdost polymerneho kompozitu z PP matricou

Author(s): Ľudmila Dulebová, Alžbeta Perháčová, Volodymyr Moravskyi, Volodymyr Krasinskyi
Published in: Plastics Production, Issue 1, 2017, Page(s) 54-57, ISSN 1802-1549
Publisher: Infocube s.r.o.

Vyskum a vyvoj generacie strojov pre spracovanie kompozitnych a nanokompozitnych materialov

Author(s): Ľudmila Dulebová
Published in: Košice: Dnes, Issue 5(85), 2018, Page(s) 8
Publisher: Calameo

Nowe horyzonty na Wydziale Mechanicznym dzięki H2020

Author(s): Janusz Sikora
Published in: Biuletyn Informacyjny POLITECHNIKI LUBELSKIEJ, Issue 1(42), 2017, Page(s) 60, ISSN 1428-4014
Publisher: Lublin University of Technology

Projekt NEWEX: nowa generacja maszyn powstaje pod kierunkiem naukowca z PL

Author(s): Janusz Sikora
Published in: Kurier Lubelski, Issue 220, 2018, Page(s) 06, ISSN 2353-6136
Publisher: Poland Press Group

Mid-term meeting projektu NEWEX H2020

Author(s): Ľudmila Dulebová
Published in: Haló, Issue 4 (26), 2018, Page(s) 22, ISSN 2585-979X
Publisher: Technical University of Kosice

H2020 - NEWEX projekt na Strojníckej fakulte

Author(s): Ľudmila Dulebová
Published in: Haló, Issue 4(25), 2017, Page(s) 31, ISSN 2585-979X
Publisher: Technical University of Kosice

Spolupraca univerzit a priemyslu v projekte NEWEX na SjF

Author(s): Ľudmila Dulebová
Published in: Haló, Issue 1 (28), 2019, Page(s) 19, ISSN 2585-979X
Publisher: Technical University of Kosice

Projekt NEWEX - wytłaczarka nowej generacji

Author(s): Janusz Sikora
Published in: Tworzywa Sztuczne w Przemysle, Issue 3 (10), 2019, Page(s) 128-129, ISSN 2082-6877
Publisher: Media Tech s.c.

Intellectual Property Rights

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Application/Publication number: SK 00049-2019
Date: 2019-05-14
Applicant(s): UNIVERSIDADE DO MINHO

Obrotowy segment układu uplastyczniającego wytłaczarki jednoślimakowej

Application/Publication number: PL P.429567
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Obrotowy segment układu uplastyczniającego wytłaczarki jednoślimakowej

Application/Publication number: PL P.429567
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra uplastyczniającego wytłaczarki (Adjusting mechanism of the plasticizing barrel of the extruder)

Application/Publication number: PL P.425593
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de ajuste do cilindro ativo da extrusora

Application/Publication number: PT 115417
Date: 2019-03-27
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14
Applicant(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający (plasticizing sysstem)

Application/Publication number: PL P.427532
Date: 2018-10-24
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: PL P.425590
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Application/Publication number: PT 115417
Date: 2019-03-27
Applicant(s): SEZ KROMPACHY AS

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Application/Publication number: SK 00049-2019
Date: 2019-05-14

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Application/Publication number: SK 00049-2019
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki

Application/Publication number: PL P.429566
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Cylinder uplastyczniający (Platicizing barrel)

Application/Publication number: PL P.427533
Date: 2018-10-24
Applicant(s): POLITECHNIKA LUBELSKA

Wytłaczarka ślimakowa do tworzyw polimerowych (Screw extruder for polymers)

Application/Publication number: PL P.422116
Date: 2017-07-04
Applicant(s): POLITECHNIKA LUBELSKA

Ślimak wytłaczarki (Extruder's screw)

Application/Publication number: PL P.422117
Date: 2017-07-04
Applicant(s): POLITECHNIKA LUBELSKA

Wytłaczarka (Extruder)

Application/Publication number: PL P.422114
Date: 2017-07-04
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14
Applicant(s): SEZ KROMPACHY AS

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Application/Publication number: SK 00049-2019
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14
Applicant(s): UNIVERSIDADE DO MINHO

Układ uplastyczniający wytłaczarki jednoślimakowej

Application/Publication number: PL P.429561
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14
Applicant(s): SEZ KROMPACHY AS

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Application/Publication number: PT 115417
Date: 2019-03-27
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de ajuste do cilindro ajustável da extrusora monofuso.

Application/Publication number: PT 115425
Date: 2019-04-05
Applicant(s): POLITECHNIKA LUBELSKA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14

Mecanismo de ajuste do cilindro ajustável da extrusora monofuso.

Application/Publication number: PT 115425
Date: 2019-04-05
Applicant(s): UNIVERSIDADE DO MINHO

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Application/Publication number: PL P.425592
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Aktywny układ uplastyczniający wytłaczarki jednoślimakowej

Application/Publication number: PL P.429568
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro ativo da extrusora

Application/Publication number: PT 115417
Date: 2019-03-27
Applicant(s): SEZ KROMPACHY AS

Aktywny segment układu uplastyczniającego wytłaczarki jednoślimakowej

Application/Publication number: PL P.429570
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki jednoślimakowej

Application/Publication number: PL P.429561
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Nastavovaci mechanizmus aktivneho valca vytlacacieho stroja (Adjusting mechanism of the active extruder barrel)

Application/Publication number: SK 00049-2019
Date: 2019-05-14
Applicant(s): SEZ KROMPACHY AS

Mecanismo de ajuste do cilindro de uma extrusora de parafuso

Application/Publication number: PT 115148
Date: 2018-11-14

Wytłaczarka ślimakowa (Extruder's srew)

Application/Publication number: PL P.422115
Date: 2017-07-04
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra nastawnego wytłaczarki jednoślimakowej (Adjusting mechanism of the adjustable barrel of a single-screw extruder)

Application/Publication number: PL P.425591
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: PL P.425590
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14
Applicant(s): SEZ KROMPACHY AS

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14
Applicant(s): UNIVERSIDADE DO MINHO

Mechanizm regulacyjny cylindra uplastyczniającego wytłaczarki (Adjusting mechanism of the plasticizing barrel of the extruder)

Application/Publication number: PL P.425593
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: PL P.425590
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Application/Publication number: PL P.429569
Date: 2019-04-08
Applicant(s): UZDAROJI AKCINE BENDROVE DIRMETA

Regulacny mechanizmus valca wytlacacieho stroja (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: SK 00048-2019
Date: 2019-05-14
Applicant(s): SEZ KROMPACHY AS

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Application/Publication number: PL P.425592
Date: 2018-05-16
Applicant(s): SEZ KROMPACHY AS

Wytłaczarka ślimakowa do tworzyw polimerowych (Screw extruder for polymers)

Application/Publication number: PL P.422116
Date: 2017-07-04
Applicant(s): POLITECHNIKA LUBELSKA

Cylinder uplastyczniający (Platicizing barrel)

Application/Publication number: PL P.427533
Date: 2018-10-24
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny cylindra nastawnego wytłaczarki jednoślimakowej (Adjusting mechanism of the adjustable barrel of a single-screw extruder)

Application/Publication number: PL P.425591
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Układ uplastyczniający wytłaczarki

Application/Publication number: PL P.429566
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de plasticização da extrusora

Application/Publication number: PT 115441
Date: 2019-04-10
Applicant(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Application/Publication number: PL P.429569
Date: 2019-04-08

Mechanizm regulacyjny cylindra wytłaczarki ślimakowej (Adjusting mechanism of the screw extruder barrel)

Application/Publication number: PL P.425590
Date: 2018-05-16
Applicant(s): SEZ KROMPACHY AS

Mecanismo de ajuste do cilindro de plasticização da extrusora

Application/Publication number: PT 115441
Date: 2019-04-10
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de ajuste do cilindro de plasticização da extrusora

Application/Publication number: PT 115441
Date: 2019-04-10
Applicant(s): POLITECHNIKA LUBELSKA

Mechanizm regulacyjny aktywnego cylindra wytłaczarki (Adjusting mechanism of the active extruder barrel)

Application/Publication number: PL P.425592
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Aktywny układ uplastyczniający wytłaczarki

Application/Publication number: PL P.429569
Date: 2019-04-08
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Application/Publication number: PL W.127342
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de plasticização.

Application/Publication number: PT 11875
Date: 2019-05-14

Mecanismo de plasticização da extrusora.

Application/Publication number: PT 11876
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki jednoślimakowej (Plasticizing mechanism of the single-screw extruder)

Application/Publication number: PL W.127343
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Application/Publication number: PL W.127341
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização da extrusora.

Application/Publication number: PT 11876
Date: 2019-05-14
Applicant(s): UNIVERSIDADE DO MINHO

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Application/Publication number: PL W.127342
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Application/Publication number: PL W.127341
Date: 2018-05-16

Mecanismo de plasticização da extrusora.

Application/Publication number: PT 11876
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające (Plasticizing mechanism)

Application/Publication number: PL W.127341
Date: 2018-05-16
Applicant(s): POLITECHNIKA LUBELSKA

Urządzenie uplastyczniające wytłaczarki (Plasticizing mechanism of the extruder)

Application/Publication number: PL W.127342
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização da extrusora monofuso

Application/Publication number: PT 11877
Date: 2019-05-14

Mecanismo de plasticização da extrusora monofuso

Application/Publication number: PT 11877
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

Mecanismo de plasticização da extrusora monofuso

Application/Publication number: PT 11877
Date: 2019-05-14
Applicant(s): UNIVERSIDADE DO MINHO

Urządzenie uplastyczniające wytłaczarki jednoślimakowej (Plasticizing mechanism of the single-screw extruder)

Application/Publication number: PL W.127343
Date: 2018-05-16
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização.

Application/Publication number: PT 11875
Date: 2019-05-14
Applicant(s): UNIVERSIDADE DO MINHO

Mecanismo de plasticização.

Application/Publication number: PT 11875
Date: 2019-05-14
Applicant(s): POLITECHNIKA LUBELSKA

NewEX H2020-MSCA-RISE-2017

Application/Publication number: PL Z.467447
Date: 2017-02-10
Applicant(s): POLITECHNIKA LUBELSKA

Searching for OpenAIRE data...

Deliverables

Publications

Intellectual Property Rights

Share this page

Download