CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
Report of the tests, evaluation and adjustment of the cable robot system in a controlled laboratory environment. The following systems will be tested and evaluated: movement of the robot, anchoring system, scanning system, drilling and positioning of the anchorages, handling of a curtain wall module and placing it in a specific place of the structure.
Analysis and evaluationReport of the analysis and evaluation of existing devices for being integrated on the Cable Robot for vertical works like winches, pulleys, end-effectors comprising controllers and drives, sensors (for motion, for quality inspection, for preventing collisions), actuators, (automated) tools for scanning slabs, tools for drilling slabs automatically, for handling curtain wall anchorage, for screwing curtain wall anchorage to the slabs and for handling and assembling curtain wall modules.
Identification of requirementsReport of the identification of the requirements for the Cable Robot system for vertical works in the Construction sector, in particular, for the installation of curtains walls. Definition of the regulations for elevation and transport; definition of safety regulations for works in exterior of buildings. Definition of the tolerances required for the different steps in the assembly of facades.
Report on communication and dissemination activitiesSummary report on communication and dissemination activities provided at M12, M24 and M42; revised periodically.
Public communication material: website, brochure, newsletter, templatesPeriodic updates of the project baseline communication materials; revised periodically.
Report on validation of the cable robot in a real construction environmentReport of the final demonstration and validation of the system in final demonstration building structure built during the project. Validation of the cable robot system in terms of time required to complete the operations, accuracy, efficiency, safety and usability for workers of the construction sector.
Methodology for the use of cable robots in construction and built environmentReport of the methodology and protocol definition for the use of cable robots in construction and built environment. The experience gained in the previous phases will be the base to define a guideline for using cable robots for performing automated installation of prefabricated panels onto building structures.
Risk assessment and definition of safety requirementsReport of the risk assessment analysis and definition of the safety requirements associated to the application of the robot in a construction environment that integrated a multi-functional end-effector specifically for working at height with heavy construction products.
Prototype of the final demonstrator building structure built according to the specifications and designs performed in WP2 including the description of the accesses and the description of the work site.
Publications
Auteurs:
V. Ferravante, E. Riva, M. Taghavi, F. Braghin, T. Bock
Publié dans:
Mechanism and Machine Theory, Numéro 135, 2019, Page(s) 54-64, ISSN 0094-114X
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.mechmachtheory.2019.01.023
Auteurs:
Hussein Hussein, Joao Cavalcanti Santos, Jean-Baptiste Izard, Marc Gouttefarde
Publié dans:
IEEE Transactions on Robotics, 2021, Page(s) 1-20, ISSN 1552-3098
Éditeur:
Institute of Electrical and Electronics Engineers
DOI:
10.1109/tro.2020.3043684
Auteurs:
Thomas Linner, Wen Pan, Rongbo Hu, Charlie Zhao, Kepa Iturralde, Meysam Taghavi, Julian Trummer, Marcel Schlandt, Thomas Bock
Publié dans:
Construction Innovation, Numéro 20/1, 2020, Page(s) 96-111, ISSN 1471-4175
Éditeur:
Arnold
DOI:
10.1108/ci-06-2019-0053
Auteurs:
Rongbo Hu, Kepa Iturralde, Thomas Linner, Charlie Zhao, Wen Pan, Alessandro Pracucci, Thomas Bock
Publié dans:
Buildings, Numéro 11/1, 2021, Page(s) 8, ISSN 2075-5309
Éditeur:
MDPI
DOI:
10.3390/buildings11010008
Auteurs:
Taghavi, Meysam;Heredia, Homero;Iturralde, Kepa;Halvorsen, Håvard;Bock, Thomas
Publié dans:
Journal of Facade Design and Engineering, Vol 6 No 2: ICAE2018 Special Numéro (presented in ICAE 2018), Numéro Volume 6, Number 2, 2018, Page(s) 001-008, ISSN 2213-3038
Éditeur:
Journal of Facade Design and Engineering
DOI:
10.7480/jfde.2018.2.2067
Auteurs:
Ilhan, B., Hu, R.,Iturralde, K.,Pan, W., Taghavi, M., Bock, T.
Publié dans:
2018
Éditeur:
Japan council for Renewable Energy
DOI:
10.24752/gre.1.0_93
Auteurs:
Hussein Hussein, Joao Cavalcanti Santos, Marc Gouttefarde
Publié dans:
2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Numéro every year, 2018, Page(s) 5117-5124, ISBN 978-1-5386-8094-0
Éditeur:
IEEE
DOI:
10.1109/iros.2018.8593900
Auteurs:
Meysam Taghavi, Kepa Iturralde, Thomas Bock
Publié dans:
Proceedings of the 35th International Symposium on Automation and Robotics in Construction (ISARC), Numéro Number 35, every year, 2018, Page(s) 396-403
Éditeur:
International Association for Automation and Robotics in Construction (IAARC)
DOI:
10.22260/isarc2018/0056
Auteurs:
Meysam Taghavi, Taku Kinoshita, Thomas Bock
Publié dans:
Proceedings of the 36th International Symposium on Automation and Robotics in Construction (ISARC), 2019
Éditeur:
International Association for Automation and Robotics in Construction (IAARC)
DOI:
10.22260/isarc2019/0089
Auteurs:
Kepa Iturralde, Malte Feucht, Rongbo Hu, Wen Pan, Marcel Schlandt, Thomas Linner, Thomas Bock, Jean-Baptiste Izard, Ibon Eskudero, Mariola Rodriguez, Jose Gorrotxategi, Julen Astudillo, Joao Cavalcanti, Marc Gouttefarde, Marc Fabritius, Christoph Martin, Tomas Henninge, Stein Normes, Yngve Jacobsen, A. Pracucci, Jesús Cañada, José David Jimenez-Vicaria, Carlo Paulotto, Rubén Alonso, Lorenzo El
Publié dans:
Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC), 2020, ISBN 978-952-94-3634-7
Éditeur:
International Association for Automation and Robotics in Construction (IAARC)
DOI:
10.22260/isarc2020/0204
Auteurs:
Joao C. Santos, Ahmed Chemori, Marc Gouttefarde
Publié dans:
2020 IEEE International Conference on Robotics and Automation (ICRA), 2020, Page(s) 3889-3895, ISBN 978-1-7281-7395-5
Éditeur:
IEEE
DOI:
10.1109/icra40945.2020.9197271
Auteurs:
Kinoshita, T.,Iturralde, K.,
Taghavi, M., Pan, W., Bock, T.
Publié dans:
2019
Éditeur:
SJR
Auteurs:
Alessandro Pracucci, Laura Vandi, Theo Zaffagnini
Publié dans:
L’Ufficio Tecnico, Vol.5/2020, Numéro bimestral, 2020, Page(s) 10 - 18, ISSN 0394-8293
Éditeur:
Maggioli Editore
Auteurs:
Hussein Hussein, Marc Gouttefarde, François Pierrot
Publié dans:
Advances in Robot Kinematics 2018, Numéro 8, 2019, Page(s) 310-318, ISBN 978-3-319-93187-6
Éditeur:
Springer International Publishing
DOI:
10.1007/978-3-319-93188-3_36
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible