Skip to main content
European Commission logo
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Highly automatEd PHysical Achievements and PerformancES using cable roboTs Unique Systems

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Report on laboratory tests

Report of the tests, evaluation and adjustment of the cable robot system in a controlled laboratory environment. The following systems will be tested and evaluated: movement of the robot, anchoring system, scanning system, drilling and positioning of the anchorages, handling of a curtain wall module and placing it in a specific place of the structure.

Analysis and evaluation

Report of the analysis and evaluation of existing devices for being integrated on the Cable Robot for vertical works like winches, pulleys, end-effectors comprising controllers and drives, sensors (for motion, for quality inspection, for preventing collisions), actuators, (automated) tools for scanning slabs, tools for drilling slabs automatically, for handling curtain wall anchorage, for screwing curtain wall anchorage to the slabs and for handling and assembling curtain wall modules.

Identification of requirements

Report of the identification of the requirements for the Cable Robot system for vertical works in the Construction sector, in particular, for the installation of curtains walls. Definition of the regulations for elevation and transport; definition of safety regulations for works in exterior of buildings. Definition of the tolerances required for the different steps in the assembly of facades.

Report on communication and dissemination activities

Summary report on communication and dissemination activities provided at M12, M24 and M42; revised periodically.

Public communication material: website, brochure, newsletter, templates

Periodic updates of the project baseline communication materials; revised periodically.

Report on validation of the cable robot in a real construction environment

Report of the final demonstration and validation of the system in final demonstration building structure built during the project. Validation of the cable robot system in terms of time required to complete the operations, accuracy, efficiency, safety and usability for workers of the construction sector.

Methodology for the use of cable robots in construction and built environment

Report of the methodology and protocol definition for the use of cable robots in construction and built environment. The experience gained in the previous phases will be the base to define a guideline for using cable robots for performing automated installation of prefabricated panels onto building structures.

Risk assessment and definition of safety requirements

Report of the risk assessment analysis and definition of the safety requirements associated to the application of the robot in a construction environment that integrated a multi-functional end-effector specifically for working at height with heavy construction products.

Prototype of the final demonstrator building structure

Prototype of the final demonstrator building structure built according to the specifications and designs performed in WP2 including the description of the accesses and the description of the work site.

Veröffentlichungen

Dynamic analysis of high precision construction cable-driven parallel robots

Autoren: V. Ferravante, E. Riva, M. Taghavi, F. Braghin, T. Bock
Veröffentlicht in: Mechanism and Machine Theory, Ausgabe 135, 2019, Seite(n) 54-64, ISSN 0094-114X
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.mechmachtheory.2019.01.023

Smallest Maximum Cable Tension Determination for Cable-Driven Parallel Robots

Autoren: Hussein Hussein, Joao Cavalcanti Santos, Jean-Baptiste Izard, Marc Gouttefarde
Veröffentlicht in: IEEE Transactions on Robotics, 2021, Seite(n) 1-20, ISSN 1552-3098
Herausgeber: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tro.2020.3043684

A technology management system for the development of single-task construction robots

Autoren: Thomas Linner, Wen Pan, Rongbo Hu, Charlie Zhao, Kepa Iturralde, Meysam Taghavi, Julian Trummer, Marcel Schlandt, Thomas Bock
Veröffentlicht in: Construction Innovation, Ausgabe 20/1, 2020, Seite(n) 96-111, ISSN 1471-4175
Herausgeber: Arnold
DOI: 10.1108/ci-06-2019-0053

A Simple Framework for the Cost–Benefit Analysis of Single-Task Construction Robots Based on a Case Study of a Cable-Driven Facade Installation Robot

Autoren: Rongbo Hu, Kepa Iturralde, Thomas Linner, Charlie Zhao, Wen Pan, Alessandro Pracucci, Thomas Bock
Veröffentlicht in: Buildings, Ausgabe 11/1, 2021, Seite(n) 8, ISSN 2075-5309
Herausgeber: MDPI
DOI: 10.3390/buildings11010008

Development of a Modular End Effector for the installation of Curtain Walls with cable-robots

Autoren: Taghavi, Meysam;Heredia, Homero;Iturralde, Kepa;Halvorsen, Håvard;Bock, Thomas
Veröffentlicht in: Journal of Facade Design and Engineering, Vol 6 No 2: ICAE2018 Special Ausgabe (presented in ICAE 2018), Ausgabe Volume 6, Number 2, 2018, Seite(n) 001-008, ISSN 2213-3038
Herausgeber: Journal of Facade Design and Engineering
DOI: 10.7480/jfde.2018.2.2067

ACHIEVING SUSTAINABILITY IN CONSTRUCTION THROUGH AUTOMATION AND ROBOTICS

Autoren: Ilhan, B., Hu, R.,Iturralde, K.,Pan, W., Taghavi, M., Bock, T.
Veröffentlicht in: 2018
Herausgeber: Japan council for Renewable Energy
DOI: 10.24752/gre.1.0_93

Geometric Optimization of a Large Scale CDPR Operating on a Building Facade

Autoren: Hussein Hussein, Joao Cavalcanti Santos, Marc Gouttefarde
Veröffentlicht in: 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Ausgabe every year, 2018, Seite(n) 5117-5124, ISBN 978-1-5386-8094-0
Herausgeber: IEEE
DOI: 10.1109/iros.2018.8593900

Cable-Driven Parallel Robot for Curtain Wall Modules Automatic Installation

Autoren: Meysam Taghavi, Kepa Iturralde, Thomas Bock
Veröffentlicht in: Proceedings of the 35th International Symposium on Automation and Robotics in Construction (ISARC), Ausgabe Number 35, every year, 2018, Seite(n) 396-403
Herausgeber: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/isarc2018/0056

Design, Modelling and Simulation of Novel Hexapod-Shaped Passive Damping System for Coupling Cable Robot and End Effector in Curtain Wall Module Installation Application

Autoren: Meysam Taghavi, Taku Kinoshita, Thomas Bock
Veröffentlicht in: Proceedings of the 36th International Symposium on Automation and Robotics in Construction (ISARC), 2019
Herausgeber: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/isarc2019/0089

A Cable Driven Parallel Robot with a Modular End Effector for the Installation of Curtain Wall Modules

Autoren: Kepa Iturralde, Malte Feucht, Rongbo Hu, Wen Pan, Marcel Schlandt, Thomas Linner, Thomas Bock, Jean-Baptiste Izard, Ibon Eskudero, Mariola Rodriguez, Jose Gorrotxategi, Julen Astudillo, Joao Cavalcanti, Marc Gouttefarde, Marc Fabritius, Christoph Martin, Tomas Henninge, Stein Normes, Yngve Jacobsen, A. Pracucci, Jesús Cañada, José David Jimenez-Vicaria, Carlo Paulotto, Rubén Alonso, Lorenzo El
Veröffentlicht in: Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC), 2020, ISBN 978-952-94-3634-7
Herausgeber: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/isarc2020/0204

Redundancy Resolution Integrated Model Predictive Control of CDPRs: Concept, Implementation and Experiments

Autoren: Joao C. Santos, Ahmed Chemori, Marc Gouttefarde
Veröffentlicht in: 2020 IEEE International Conference on Robotics and Automation (ICRA), 2020, Seite(n) 3889-3895, ISBN 978-1-7281-7395-5
Herausgeber: IEEE
DOI: 10.1109/icra40945.2020.9197271

ロボットアームによるファサード組立時の誤差補正 Deviation Correction for Robotic Arm during Assembly

Autoren: Kinoshita, T.,Iturralde, K., Taghavi, M., Pan, W., Bock, T.
Veröffentlicht in: 2019
Herausgeber: SJR

La trasformazione digitale nella filiera delle costruzioni: l’evoluzione delle attività in cantiere tra automazione e robotizzazione. Scenari di sviluppo e casi studio verso la digitalizzazione delle attività di installazione, monitoraggio e manutenzione.

Autoren: Alessandro Pracucci, Laura Vandi, Theo Zaffagnini
Veröffentlicht in: L’Ufficio Tecnico, Vol.5/2020, Ausgabe bimestral, 2020, Seite(n) 10 - 18, ISSN 0394-8293
Herausgeber: Maggioli Editore

Static Modeling of Sagging Cables with Flexural Rigidity and Shear Forces

Autoren: Hussein Hussein, Marc Gouttefarde, François Pierrot
Veröffentlicht in: Advances in Robot Kinematics 2018, Ausgabe 8, 2019, Seite(n) 310-318, ISBN 978-3-319-93187-6
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-93188-3_36

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor