Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Development of the complete workflow for producing and using a novel nanomodified Ti-based alloy for additive manufacturing in special applications.

Objective

NANONTUN3D will take advantage of the possibilities of Additive Manufacturing (AM) together with the development of a specially tailored Ti- based nano-aditived material to achieve dramatic improvements in structural parts of aero, space, mobility, and equipment sectors, reaching expected savings between 40% and 50% of material in critical applications. inherent benefits of AM will be kept (decrease in throughput times, tool-less production, high buy-to–fly-run ratios, etc.).
By adding nano-particles (np) to metal matrixes, the whole life cycle of the NANOTUN3D material has been designed with AM processability in mind: safety and handling issues, processing in well-known AM technologies, postprocessing and eventual certification issues are dealt with, and innovative core-shell treatment of the nano-particles that suits the Ti matrix and produces Ti64-like powder ready to be AM processed. A whole Health, Safety and Environmental (HSE) management system will also be developed, as well as all the protocols to start qualification/certification of material and process.

Call for proposal

H2020-NMP-2014-2015

See other projects for this call

Sub call

H2020-NMP-PILOTS-2015

Coordinator

INSTITUTO TECNOLOGICO METALMECANICO, MUEBLE, MADERA, EMBALAJE Y AFINES-AIDIMME
Net EU contribution
€ 489 031,25
Address
CALLE LEONARDO DA VINCI 38 PARQUE TECNOLOGICO
46980 Paterna Valencia
Spain

See on map

SME

The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.

Yes
Region
Este Comunitat Valenciana Valencia/València
Activity type
Research Organisations
Links
Total cost
€ 489 031,25

Participants (8)