Functionally graded Additive Manufacturing scaffolds by hybrid manufacturing

Información del proyecto

FAST

Identificador del acuerdo de subvención: 685825

DOI 10.3030/685825

Proyecto cerrado

Fecha de la firma de la CE 9 Octubre 2015

Fecha de inicio 1 Diciembre 2015

Fecha de finalización 30 Noviembre 2019

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies

Coste total € 4 916 750,00

Aportación de la UE € 4 916 750,00

Coordinado por

UNIVERSITEIT MAASTRICHT
Netherlands

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (1)

Project website

Project website on line with all the description of the project, of partners, reserved area and news area.

Documents, reports (6)

Dissemination plan

First draft of the dissemination plan with all the actions that has to be taken during the project to improve the scientific, social and commercial awareness of the project results.

Toxicity assessment of fillers

Toxicity assessment of nanofillers as raw materials and feedback for safety improvements

Plan definition

Identification of critical steps and acquisition of available data on raw materials and processes

Nanomaterial exposure

Nanomaterial exposure on master batch production and surface treatment process and safety improvements.

1st Report on dissemination activities

1st Report on dissemination activities that has been organized and performed during the project.

Toxicity assessment of master batch

Toxicity assessment of master batch and safety improvements

Open Research Data Pilot (1)

Open Research Data of Horizon 2020 management plan

Demonstrators, pilots, prototypes (1)

Basic Prototype Delivery

The basic prototype will be delivered to IST accordingly with the requirements and with the modification suggested by IST respect to the original device.

Publicaciones

Peer reviewed articles (2)

Innovative Composites Based on Organic Modified Zirconium Phosphate and PEOT/PBT Copolymer

Autores: Maria Bastianini, Marco Scatto, Michele Sisani, Paolo Scopece, Alessandro Patelli, Annarita Petracci
Publicado en: Journal of Composites Science, Edición 2/2, 2018, Página(s) 31, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs2020031

Nanoroughness, Surface Chemistry, and Drug Delivery Control by Atmospheric Plasma Jet on Implantable Devices

Autores: Alessandro Patelli, Federico Mussano, Paola Brun, Tullio Genova, Emmanuele Ambrosi, Niccoló Michieli, Giovanni Mattei, Paolo Scopece, Lorenzo Moroni
Publicado en: ACS Applied Materials & Interfaces, Edición 10/46, 2018, Página(s) 39512-39523, ISSN 1944-8244
Editor: American Chemical Society
DOI: 10.1021/acsami.8b15886

Conference proceedings (3)

Investigations on nucleophilic layers made with a novel plasma jet technique

Autores: T. Neubert, K. Lachmann, M. Thomas, V. Zeren, J. Lips, P. Scopece, E. Verga Falzacappa, A. Patelli, C.-P. Klages
Publicado en: Proceedings of ISPC 23, 2017
Editor: International Plasma Chemistry Society

Influence of the substrate temperature on the layer properties made by an atmospheric plasma jet using different precursors

Autores: Thomas Neubert, Kristina Lachmann, Veysel Zeren, Friedrich Schlueter, Paolo Scopece, Alessandro Patelli, Michael Thomas
Publicado en: Proceedings of ISPC 24, 2019
Editor: International Plasma Chemistry Society

A novel plasma jet with RF and HF coupled electrodes

Autores: Alessandro Patelli, Francesco Tampieri, Ester Marotta, Barbara Zaniol, Thomas Neubert, Kristina Lachmann, Paolo Scopece, Marco Mardegan, Elti Cattaruzza
Publicado en: Proceedings of ISPC 24, 2019
Editor: International Plasma Chemistry Society