Objetivo
The aim of BioBuild is to use biocomposites to reduce the embodied energy in building facade, supporting structure and internal partition systems by at least 50% over current materials with no increase in cost. This will lead to a step change in the use of sustainable, low carbon construction materials, by replacing aluminium, steel, FRP, brick and concrete in buildings.
Facades are widely used in construction, primarily to protect and insulate the internal structure. Internal partitions are used to divide space, carry utilities and provide thermal and acoustic insulation. The current materials used such as aluminium, steel, brick and concrete are energy intensive to produce and have high embodied energy.
FRP is an alternative construction material, benefitting from low weight, formability and simple manufacturing, allowing low material content structures and innovative design. However, typical resin and glass fibre are non-renewable, energy intensive to synthesise. Biocomposites overcome these drawbacks, whilst maintaining the benefits, being based on natural fibres and bioresins which have low embodied energy and cost.
Biocomposites are renewable and sustainable resin and reinforcement structures. The resins in this project are furan and cashew nut oil based with reinforcing fibres of flax and jute. Bast fibres have lower environmental impacts than glass, concerning climate change and energy but have similar properties.
Biocomposites are used commercially in automotive interior parts, but for outdoor applications they can degrade due to moisture absorption and bio-degradation. BioBuild will develop biocomposites and construction products with a life span of 40 years, by protecting the fibres with novel treatments and coatings.
The result of the project will be a low cost, lightweight, durable and sustainable biocomposite building system, with full technical and environmental validation, offering low embodied energy construction materials
Ámbito científico
- engineering and technologyenvironmental engineeringenergy and fuelsrenewable energy
- engineering and technologymaterials engineeringcompositesbiocomposites
- social scienceseconomics and businesseconomicssustainable economy
- engineering and technologycivil engineeringarchitecture engineeringsustainable architecturesustainable building
Tema(s)
Convocatoria de propuestas
FP7-2011-NMP-ENV-ENERGY-ICT-EeB
Consulte otros proyectos de esta convocatoria
Régimen de financiación
CP-IP - Large-scale integrating projectCoordinador
S41 9QG Chesterfield
Reino Unido
Ver en el mapa
Participantes (16)
1401 KOBENHAVN K
Ver en el mapa
28033 MADRID
Ver en el mapa
La participación finalizó
8219PZ Lelystad
Ver en el mapa
2440 Geel
Ver en el mapa
40221 Düsseldorf
Ver en el mapa
La participación finalizó
8022 AW ZWOLLE
Ver en el mapa
La participación finalizó
20146 milano
Ver en el mapa
3000 Leuven
Ver en el mapa
4536 902 Mozelos Vfr
Ver en el mapa
67663 Kaiserslautern
Ver en el mapa
2595 DA Den Haag
Ver en el mapa
1700-066 LISBOA
Ver en el mapa
6709 PA WAGENINGEN
Ver en el mapa
WA7 3DU RUNCORN
Ver en el mapa
09116 CHEMNITZ
Ver en el mapa
1437 Kobenhavn K
Ver en el mapa