Objective
The rapidly growing use of high-performance composites in high-end sectors such as aerospace, show that these materials are already commercially viable as long as production volumes are limited and applications not primarily cost-driven. In order to achieve a step-change in the application of high-performance composites in larger-volume applications, HIVOCOMP focuses on achieving radical advances in two materials systems that show unique promise for cost effective, higher-volume production of high performance carbon fibre reinforced parts. These are: 1) advanced polyurethane (PU) thermoset matrix materials offering increased mechanical performance and reduced cycle times compared to epoxy, and 2) thermoplastic PP- and PA6-based self-reinforced polymer composites incorporating continuous carbon fibre reinforcements with lower process times and far higher toughness than current thermoplastic and thermoset solutions. The project will analyse and develop these matrix materials, their combination with advanced textile preforms, and optimise material properties for advanced processing technologies, joining technologies (adhesives / welding) and the incorporation and self-diagnosis (sensing) materials. The focus on breakthrough material innovations are complemented by enabling work covering material testing, chemical and micro-mechanical modelling and simulation tool development, as well as LCA, cost and recycling analysis, and prototyping of typical applications, assuring that the proposed material innovations can be successfully translated into high-impact industrial applications. The project drives the material innovations with the road vehicle sector in mind, but has clearly identified spin-off applications in other sectors. The project foresees a step-wise implementation in future products introduced into larger-volume transport applications starting with validated demonstration parts in 2013, and so ensuring a large-scale societal impact of the innovations achieved.
Fields of science
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- engineering and technologymaterials engineeringcomposites
- engineering and technologymaterials engineeringtextiles
- social sciencessocial geographytransport
- natural sciencescomputer and information sciencessoftwaresoftware applicationssimulation software
Programme(s)
Call for proposal
FP7-NMP-2009-LARGE-3
See other projects for this call
Funding Scheme
CP-IP - Large-scale integrating projectCoordinator
3000 Leuven
Belgium
See on map
Participants (15)
38440 Wolfsburg
See on map
70372 Stuttgart
See on map
06123 Perugia
See on map
10043 Orbassano
See on map
3078 Everberg
See on map
80333 Muenchen
See on map
92220 BAGNEUX
See on map
17003 Girona
See on map
1015 Lausanne
See on map
LS2 9JT Leeds
See on map
9700 Oudenaarde
See on map
4910 RIED IM INNKREIS
See on map
80686 Munchen
See on map
48599 GRONAU
See on map
08013 Barcelona
See on map