RECONFIGURABLE LIGHT ELECTRIC VEHICLE

Leistungen

Measurement result report of the Use case 3

The report will present the test results of individual and shared used in real life at Regensburg, Germany (use case 3). The report will include:- the usability and benefits of a small vehicle in a setting where high powers and/or long ranges are not required,- exploration of the car sharing opportunities for intensified vehicle utilisation.- estimation of the market potential of the LEV in the car sharing. The measurement results are used for validating the models and methods used and for disseminating and promoting our concept.This deliverable refers to T6.5.

Measurement result report of the Use case 1

This report will present the test results of the wireless and conductive charging, and the automated relocation for charging. The tests are performed at Smart Otaniemi EV testbed (use case 1) and testing routine consist of experiments in different conditions, possibly also in winter conditions sometimes hard for the relocation and wireless charging.This deliverable refers to T6.3.

Measurement result report of the Use case 2

The report will include the test results for 24 hour multi-usage of the vehicle in real life at Helsinki capital area (use case 2). The report presents the benefits of the multipurpose usage of an L7 category vehicle, the functionality of the charging features of the vehicle, and the evaluation of the the vehicle performance close to its technical limits. The measurement results are used for validating the models and methods used and for promoting our concept.This deliverable refers to T6.4.

Report of the vehicle dynamometer measurements

This deliverable reports the results of controlled laboratory experiments of the LEV. The tests consist of:- technical tests (including assessment of the ADAS feature and the driver-vehicle interface) to confirm that all parts and implementations and the vehicle as whole function as intended,- dynamometer tests on the vehicle performance for further comparisons and qualifications.The energy consumption of the demonstrator LEV is measured for three different driving cycles, for Helsinki capital area and Regensburg driving cycles derived in T2.1 and for a standard automotive driving cycle applicable to L7 category vehicles, i.e. the World Motorcycle Test Cycle (WMTC).This deliverable refers to T6.2.

Report on dissemination and public communication activities

This report presents the project activities related to dissemination and public communication, including community building activities and participation to external events, workshops, and final events. The first submission of this deliverable is on M18 and second one is on M42.This deliverable refers to T7.4.

Project website

This is a report on the design implementation and launch of the project website The website will present the various project components the partners involved and progress and activities updatesThis deliverable refers to T72

Veröffentlichungen

Harmonization and Validation of Jiles–Atherton Static Hysteresis Models

Autoren: Urban Rupnik; Alen Alić; Damijan Miljavec
Veröffentlicht in: Energies, Ausgabe 15(18), 6760, 2022, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en15186760

Modelling of the Electrically Excited Synchronous Machine with the Rotary Transformer Design Influence

Autoren: Manko, R.; Vukotić, M.; Makuc, D.; Vončina, D.; Miljavec, D.; Čorović, S.
Veröffentlicht in: Energies, Ausgabe 15(8), 2832, 2022, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en15082832

Integrated cooling/HVAC system design and control strategy for reconfigurable light electric vehicle

Autoren: Daniele Chiappini, Pere Canals, Laura Tribioli, Gino Bella
Veröffentlicht in: Transportation Research Procedia, Ausgabe 70, 2023, Seite(n) 5-12, ISSN 2352-1465
Herausgeber: Elsevier
DOI: 10.1016/j.trpro.2023.10.002

Modular and Scalable Powertrain for Multipurpose Light Electric Vehicles

Autoren: Mehrnaz Farzam Far, Damijan Miljavec, Roman Manko, Jenni Pippuri-Mkelinen, Mikaela Ranta, Janne Kernen, Jutta Kinder, Mario Vukoti
Veröffentlicht in: World Electric Vehicle Journal, Ausgabe 14, 2023, Seite(n) 309, ISSN 2032-6653
Herausgeber: MDPI
DOI: 10.3390/wevj14110309

Thermal Effects in the End-Winding Region of Electrical Machines

Autoren: Mario Vukotić, Stefan Lutovski, Nina Šutar, Damijan Miljavec, Selma Čorović
Veröffentlicht in: Energies, Ausgabe 16, 2024, Seite(n) 930, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en16020930

Laser Welding of 316L Austenitic Stainless Steel in an Air and a Water Environment

Autoren: Alhajhamoud, M.; Candan, L.; Ilgaz, M.A.; Cinar, I.; Ozbey, S.; Čorović, S.; Miljavec, D.; Kayahan, E.
Veröffentlicht in: Materials, Ausgabe 15(6), 2248, 2022, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma15062248

Transforming Urban Transportation via Safe, Innovative Light Vehicles

Autoren: Jenni Pippuri-Mäkeläinen; Laura Tribioli; Daniele Chiappini; Paola Pasqualino; Damijan Miljavec; Janne Keränen; Mehrnaz Farzam Far; Jose Camposano
Veröffentlicht in: SAE Technical Paper, Ausgabe 2022-24-0001, 2022, ISSN 0148-7191
Herausgeber: SAE International
DOI: 10.4271/2022-24-0001

Revolutionizing Urban Safety: Multi-Functional L7 Vehicles with Enhanced Safety

Autoren: Emilia Romero, Jordi Salvat
Veröffentlicht in: TRA 2024, 2025
Herausgeber: Proceedings in works

the influence of material electromagnetic properties to the electric motor performance

Autoren: Mario VUKOTI, Alen ALI, Urban RUPNIK, Jaka BURJA, Damijan MILJAVEC
Veröffentlicht in: METAL Conference Proeedings, METAL 2022 Conference Proeedings, Ausgabe 2022, 2022, Seite(n) 651-655
Herausgeber: TANGER Ltd.
DOI: 10.37904/metal.2022.4429

Reconfigurable light electric vehicle with automated driving system

Autoren: Aki Lumiaho, Dr Jenni Pippuri-Mkelinen, Jose Camposano, Pyry Vikberg, Mehrnaz Farzam Far, Jorma Hiie
Veröffentlicht in: 15th ITS European Congress, Lisbon, Portugal, 22-24 May-2023, 2023
Herausgeber: ITS

Evaluation of a Combined Cooling/HVAC System for Electric Heavy Quadricycles under Different Conditions

Autoren: Daniele Chiappini, Simone Lombardi, Laura Tribioli
Veröffentlicht in: SAE/ANFIA 2024, 2025
Herausgeber: Proceedings in works

Assessment of an integrated cooling/HVAC circuit for electric heavy quadricycles

Autoren: Daniele Chiappini, Laura Tribioli, Pere Canals, Jenni Pippuri-Mkelinen
Veröffentlicht in: TRA 2024, 2025
Herausgeber: Proceedings in works

Modular and Scalable Powertrain for Multipurpose Light Electric Vehicles

Autoren: Mehrnaz Farzam Far, Damijan Miljavec, Jenni Pippuri Mkelinen, Mikaela Ranta, Janne Kernen, Jutta Kinder, Mario Vukoti
Veröffentlicht in: EDTA EVS36 proceedings, 2023
Herausgeber: '36th International Electric Vehicle Symposium and Exhibition (EVS36) Sacramento, California, USA, June 11-14, 2023

Battery and Powertrain Sizing for L7e-CU Type Electric Vehicle

Autoren: Urban Rupnik, Mario Vukoti, Roman Manko, Alen Ali, Selma orovi, Damijan Miljavec
Veröffentlicht in: SAE Technical Paper Series, Ausgabe 1, 2024, Seite(n) Open access in works
Herausgeber: SAE International
DOI: 10.4271/2024-24-0018

Development and Analysis of Rightsized Powertrains for Small Urban Vehicles

Autoren: Jenni Pippuri-Mkelinen, Urban Rupnik, Mario Vukoti, Roman Manko, Alen Ali, Selma orovi, Damijan Miljavec, Janne Kernen, Marko Antila, Mehrnaz Farzam Far, Petr Hajduk, Mikaela Ranta, Juan Pablo Martin, Joan Carles Artigau, Wolfgang Diermeier, Robert Ducellari
Veröffentlicht in: TRA 2024, 2025
Herausgeber: Proceedings in works

Exploring Body Design Similarities and Differences: A Comparative Analysis of REFLECTIVE L7 and URBANIZED N1 Categories

Autoren: Emilia Romero, Jordi Salvat, Mario Prez, Simona Roka, Lamberto Salvan, Jorma Hiie
Veröffentlicht in: FISITA 2023, 2023
Herausgeber: FISITA

Control Strategy Design for the Thermal Management System of an Electric Heavy Quadricycle

Autoren: Daniele Chiappini, Laura Tribioli, Simone Lombardi
Veröffentlicht in: SAE Technical Paper Series, Ausgabe 1, 2024, Seite(n) Open access in works
Herausgeber: SAE International
DOI: 10.4271/2024-24-0011

Project website

Autoren: Project partners
Veröffentlicht in: 2021
Herausgeber: REFLECTIVE consortium

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen