leading the TRansion of the European Automotive SUpply chain towards a circulaR futurE

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Participatory social impact assessment report

Report on participatory social impact assessment (T2.3)

Follow-up activities report

A report on the follow-up activities established by the TREASURE consortium

Standardization toolkit

Definition of the standardization toolkit (T8.4)

Exploitation plan (1st version)

Exploitation plan (1st version) (T8.1)

Report on disassemblability analysis

Report on disassemblability analysis T32

Industrial use cases and scenarios design (2nd version)

Design of industrial use cases and scenarios 2nd version T13

TREASURE reference framework

Definition of the TREASURE reference framework T11

Exploitation plan (final version) and agreement

Exploitation plan (final version) and agreement (T8.2)

Review of networking with other projects and roadmap

Review of networking with other projects and roadmap (T7.3)

TREASURE technical architecture (1st version)

Definition of the TREASURE technical architecture 1st version T41

Report on recyclability analysis

Report on recyclability analysis T33

Report on ethnography of CE in the automotive industry (final version)

Report on ethnography of CE in the automotive industry (final version) (T4.3)

TREASURE tool & platform requirements and specifications

Definition of the TREASURE tool platform requirements and specifications T12

Report on in-mold/structural electronics prototyping

Report on in-mold/structural electronics prototyping (T6.3)

Report on semi-automated disassembly

Report on semi-automated disassembly (T6.1)

Validation, verification, best practices and lessons learned (final version)

Validation, verification, best practices and lessons learned (final version) (T4.6)

Report on bio-hydrometallurgical materials recovery

Report on bio-hydrometallurgical materials recovery (T6.2)

Dissemination plan (2nd version)

Dissemination plan 2nd version T72

Report on KPIs to be embedded in the TREASURE platform

Report on KPIs to be embedded in the TREASURE platform T34

Strategic standardization roadmap

Definition of the strategic standardization roadmap (T8.4)

Advisory Board report

A report about different inputs from the Advisory Baord

Report on ethnography of CE in the automotive industry (1st version)

Report on ethnography of CE in the automotive industry 1st version T43

TREASURE methodology definition

Definition of the TREASURE methodology T21

Report on business model identification

Report on business model identification (T8.5)

Report on dissemination activities

Report on dissemination activities (T7.2)

Industrial use cases and scenarios design (1st version)

Design of industrial use cases and scenarios 1st version T13

Dissemination plan (1st version)

Dissemination plan 1st version T71

Report on clustering activities

Report on clustering activities (T7.3)

Sustainability advisory methodology definition

Definition of the sustainability advisory methodology T22

Validation, verification, best practices and lessons learned (1st version)

Validation verification best practices and lessons learned 1st version T46

Report on criticality analysis of selected vehicles

Report on criticality analysis of selected vehicles T31

TREASURE technical architecture (final version)

Definition of the TREASURE technical architecture (final version) (T4.1)

Materials recycling/recovery report

Materials recycling/recovery report (T5.3)

In-mold/structural electronics pilot reconfiguration, testing & optimization

In-mold/structural electronics pilot reconfiguration, testing & optimization (T5.6)

Materials recovery pilot plant reconfiguration, testing & optimization

Materials recovery pilot plant reconfiguration, testing & optimization (T5.4)

PCB disassembly pilot station reconfiguration, testing & optimization

PCB disassembly pilot station reconfiguration, testing & optimization (T5.2)

Dissemination videos

Dissemination videos (T7.2)

Communication material

Communication material T72

Workshop and summer school

Workshop and summer school (T7.3)

Validation of pilot plants circularity level

Validation of pilot plants circularity level (T6.4)

Publications

Enhancing the Sustainability of the Electronics in the Automotive Sector in the Context of Circular Economy Through a Decision-Making Framework

Auteurs: Alessandro Fontana, Ludovica Rossi, Jennifer Nika, Siro Dell’Ambrogio, Marzio Sorlini, Elia Ruiz Pachon, Paolo Rosa, Antoinette Van Schaik, Markus A. Reuter
Publié dans: EGG 2024 conference, 2024
Éditeur: Conference

Advancing Sustainability and Circularity in the Automotive Industry: A Data-Driven Platform Approach

Auteurs: Michele Sesana, Veronica Antonello, Mattia Calabresi, Alessandro Fontana, Ludovica Rossi, Jennifer Nika, Giuseppe Landolfi, Marzio Sorlini, Paolo Rosa
Publié dans: EGG 2024 Conference, 2024
Éditeur: Conference

Twin Transition Waste Electric and Electronic Equipment Roadmapping Tool to support improvement of environmental sustainability performance of reverse e-waste value chains

Auteurs: Daniele Perossa; Federica Acerbi; Paolo Rosa; Sergio Terzi
Publié dans: PLM24 conference, 2024
Éditeur: Conference
DOI: 10.5281/zenodo.13684152

Exergy cost associated with polymers recycling in vehicles: from qualitative to quantitative indicators (POSTER)

Auteurs: S.Russo, A. Valero, A. Ortego, M. Iglesias-Émbil, R. Magdalena
Publié dans: 36th International conference on efficiency, cost, optimization,simulation and environmental impact of energy systems, 2023
Éditeur: Conference
DOI: 10.5281/zenodo.13683925

Identification of critical raw materials and potential bottlenecks in vehicles through a thermodynamic approach

Auteurs: Ricardo Magdalena 1, Alicia Valero2, Abel Ortego3, Marta Iglesias4
Publié dans: 35th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems, 2022
Éditeur: Conference
DOI: 10.5281/zenodo.13584602

Exergy Strategies for the Circular Economy: Dismantling, Disassembly, Eco-design and Recycling in Electric Vehicles

Auteurs: Samuel Alcoceba, Nicolás Villanueva, Abel Ortego, Jorge Torrubia, Francisco Moreno, Carlos Monné, Alicia Valero
Publié dans: 37th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems, 2024
Éditeur: Conference
DOI: 10.5281/zenodo.13595727

Circular economy in car electronics - A case study of the combi meter and the infotainment of the Seat Leon II model

Auteurs: Ortego, A., Valero, A., van Schaik, A., Iglesias-Embil, M.E., Reuter, M.A., Alcoceba Pascual, S
Publié dans: 11th International Conference on Industrial Ecology 2023, 2023
Éditeur: ISIE 2023
DOI: 10.5281/zenodo.13598696

Criticality and Recyclability Assessment of Car Parts—A Thermodynamic Simulation-Based Approach

Auteurs: Marta Iglesias-Émbil, Alejandro Abadías, Alicia Valero, Guiomar Calvo, Markus Andreas Reuter, Abel Ortego
Publié dans: Sustainability, Numéro 15, 2024, Page(s) 91, ISSN 2071-1050
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/su15010091

Disassemblability Assessment of Car Parts: Lessons Learned from an Ecodesign Perspective

Auteurs: Abel Ortego; Marta Iglesias-Émbil; Alicia Valero; Miquel Gimeno-Fabra; Carlos Monné; Francisco Moreno
Publié dans: Crossref, Numéro 1, 2024, Page(s) 1-17, ISSN 2071-1050
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/su16062311

Exergy Assessment of Plastic Car Parts

Auteurs: Ortego, Abel ; Russo, Sofia ; Iglesias-Émbil, Marta ; Valero, Alicia ; Magdalena, Ricardo
Publié dans: Vehicles, Numéro 5(3), 2023, Page(s) 1211-1226, ISSN 2624-8921
Éditeur: MDPI
DOI: 10.3390/vehicles5030067

Chemical Characterization of an ARDUINO® Board and Its Surface Mount Devices for the Evaluation of Their Intrinsic Economic Value

Auteurs: Pietro Romano, Nicolò Maria Ippolito, Francesco Vegliò
Publié dans: Processes, Numéro 11, 2023, Page(s) 1911, ISSN 2227-9717
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/pr11071911

Recovery of Metals from Printed Circuit Boards by Gold-REC 1 Hydrometallurgical Process

Auteurs: Nicolo Maria Ippolito; Marco Passadoro; Francesco Ferella; Giorgio Pellei; Francesco Veglio
Publié dans: Sustainability, 2023, ISSN 2071-1050
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/su15097348

Disassembly of in-plastic embedded printed electronics

Auteurs: Stephan, Harkema, Peter A., Rensing, Sanne M.D.C., Domensino, Joris M., Vermeijlen, Diana E., Godoi Bizarro, Antoinette, van Schaik
Publié dans: Journal of Cleaner Production, Numéro 450, 2024, Page(s) 141837, ISSN 1879-1786
Éditeur: Zenodo
DOI: 10.1016/j.jclepro.2024.141837

D6.4: Validation of pilot plants circularity level (ORDP)

Auteurs: Ricardo Magdalena; Alicia Valero Nicolo Maria Ippolito Ludovica Rossi Lorenzo Gandini
Publié dans: 2024
Éditeur: Zenodo
DOI: 10.5281/zenodo.12200071

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger