An information sharing tool to optimise road maintenance and construction decisions
In a context of decreasing public expenditure affecting just about every sector, European roads have never been so jeopardised. National road authorities (NRAs) have to watch every cent as effectiveness and efficiency progressively become their focus, and software tools facilitating the exchange of comprehensive road information would be most welcome. So far the standardisation of data exchange formats has been hindered by the uncertainty surrounding its market potential. However, the team behind the V-CON (Virtual Construction for Roads) project is hopeful that a promising solution lies in BIM, which has already been successfully implemented in other sectors. They believe that the latter could be improved and brought to National Road Authorities with the help of PCP. ‘Information management over the whole life cycle is of vital importance for National Road Authorities,’ says Benno Koehorst of Rijkswaterstaat, coordinator of the project. ‘When (re)construction works or maintenance are executed, information needs to be handed over to contractors. Later in the process, as-built or as-maintained information needs to be handed over to the asset management system of the NRAs. Such exchange of information needs to be done digitally according to the structure defined by the NRA, and preferably using an open-source or vendor-independent software to process the data.’ Until now, such software didn’t exist. The V-CON project consisted in two parts: a development and standardisation part, and a pre-commercial procurement (PCP) part embedded in the procurement of two large infrastructure process projects taking place respectively in the Netherlands and Sweden. The project team initially received a total of 14 proposals, six of which have been selected. The selection process then continued until V-CON partners where fully satisfied with the proposed solutions: ‘Out of the six proposals, four have been selected for the development of a prototype in phase 2, and two have been selected for the final phase — the development of the V-CON solution. The NRAs from Sweden (Trafikverket) and the Netherlands (Rijkswaterstaat) are pleased with the results so far,’ Koehorst says. Whilst the final phase of the project is still ongoing, the team has already reached some preliminary conclusions; notably that bringing more structure in the management of information, as well as being clear about the requirements regarding information and the information exchange may lead to less deviation in the contract and its deliverables. The project will run until the end of March 2017. Until then, the V-CON solution will keep being developed before the team can proceed with the dissemination phase. ‘Eventually, our hope is that a commercial market for the V-CON solutions will emerge, and that this may lead to a wider international adoption of linked data technology in BIM for the construction industry,’ Koehorst concludes.
Keywords
V-CON, pre-commercial procurement, PCP, National road authorities, road construction, road maintenance, BIM
