Functional & Dynamic 3D Nano- MicroDevices by Direct Multi-Photon Lithography

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Special thematic issue on ISI journal

Organization of a special thematic issue on a ISI journal about functional materials for two photon lithography, 4D/5D printing and related topics.

Organised thematic session at international conference on materials

Organization of a thematic session at international conference on materials, focused on t functional materials for two photon lithography, 4D/5D printing and related topics.

Tutorial on 5D NanoPrinting relevant knowledge for cross-fertilization

Organization of a tutorial on 5D NanoPrinting relevant knowledge for cross-fertilization, including presentations and videos about all the different technologies involved in the project. All the material will be made freely available on the website.

Delivery of Data Management Plan (DMP)

The first Data Management Plan (DMP) will be delivered.

Project website and logo

Publication of 5D NanopPrinting Project website and final project logo definition

Brochure and dissemination materials

Preparation of Brochure and dissemination materials for the 5D Nanoprinting Project

Multi-photon multi-parameter fabrication-testing system

The deliverable consist in the prototype of the multi-photon multi-parameter fabrication-testing system, developed within the WP2.

Publicaciones

Facile Handling of 3D Two-Photon Polymerized Microstructures by Ultra-Conformable Freestanding Polymeric Membranes

Autores: Frank Marco den Hoed; Andrea Ottomaniello; Omar Tricinci; Luca Cesarecciu; Marco Carlotti; Patrizio Raffa; Virgilio Mattoli
Publicado en: Advanced Functional Materials, 2023, ISSN 1616-301X
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adfm.202214409

Bioinspired microneedle patches: Biomimetic designs, fabrication, and biomedical applications

Autores: Makvandi, Pooyan; Maleki, Aziz; Shabani, Majid; Hutton, Aaron RJ; Jamaledin, Rezvan; Fang, Tianxu; He, Jiahuan; Lee, Jesse; Mazzolai, Barbara; Donnelly, Ryan F; Tay, Franklin R; Chen, Guojun; Mattoli, Virgilio
Publicado en: Bioinspired microneedle patches: Biomimetic designs, fabrication, and biomedical applications, Edición 5/2, 2022, Página(s) 390-429, ISSN 2590-2385
Editor: Elsevier Inc.
DOI: 10.1016/j.matt.2021.11.021

Ultrafast Humidity Sensing Layers Made by Two-Photon Polymerization and Initiated Chemical Vapor Deposition

Autores: Stefan Cesnik; Gabriel Hernandez; Alexander Bergmann; Anna Maria Coclite
Publicado en: Advanced Sensor Research, 2023, ISSN 2751-1219
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adsr.202200100

Two-Photon Polymerization of Sugar Responsive 4D Microstructures

Autores: A. Ennis, D. Nicdao, S. Kolagatla, L. Dowling, Y. Tskhe, A. J. Thompson, D. Trimble, C. Delaney, Larisa Florea*
Publicado en: Advanced Functional Materials, 2023, ISSN 1616-301X
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adfm.202213947

Highly conformable terahertz metasurface absorbers via two-photon polymerization on polymeric ultra-thin films

Autores: Andrea Ottomaniello; Paolo Vezio; Omar Tricinci; Frank Marco den Hoed; Paul Dean; Alessandro Tredicucci; Virgilio Mattoli
Publicado en: Nanophotonics, 2023, ISSN 2192-8614
Editor: De Gruyter
DOI: 10.1515/nanoph-2022-0667

3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications

Autores: Danial Khorsandi, Amir Fahimipour, Payam Abasian, Sepehr Sadeghpour Saber, Mahla Seyedi, Sonya Ghanavati, Amir Ahmad, Andrea Amoretti De Stephanis, Fatemeh Taghavinezhaddilami, Anna Leonova, Reza Mohammadinejad, Majid Shabani, Barbara Mazzolai, Virgilio Mattoli, Franklin R. Tay, Pooyan Makvandi
Publicado en: Acta Biomaterialia, Edición 122, 2021, Página(s) 26-49, ISSN 1742-7061
Editor: Elsevier BV
DOI: 10.1016/j.actbio.2020.12.044

Novel, High-Resolution, Subtractive Photoresist Formulations for 3D Direct Laser Writing Based on Cyclic Ketene Acetals

Autores: Carlotti, Marco; Tricinci, Omar; Mattoli, Virgilio
Publicado en: Advanced Materials Technologies, Edición 1, 2022, ISSN 2365-709X
Editor: Wiley-VCH GmbH
DOI: 10.1002/admt.202101590

Sensors and “The internet of biochemical things”

Autores: Larisa Florea; Dermot Diamond
Publicado en: Frontiers in Sensors, Edición 3, 2022, Página(s) 1010212, ISSN 2673-5067
Editor: Frontiers Media S.A.
DOI: 10.3389/fsens.2022.1010212

Responsive Spiral Photonic Structures for Visible Vapor Sensing, Pattern Transformation and Encryption

Autores: J. Qian, S. Kolagatla, A. Pacalovas, X. Zhang, L. Florea,* A. L. Bradley,* C. Delaney*
Publicado en: Advanced Functional Materials, 2023, ISSN 1616-301X
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adfm.202211735

3D Micropatterned Functional Surface Inspired by Salvinia Molesta via Direct Laser Lithography for Air Retention and Drag Reduction

Autores: Omar Tricinci; Francesca Pignatelli; Virgilio Mattoli
Publicado en: Advanced Functional Materials, 2023, ISSN 1616-301X
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adfm.202206946

Temperature-Responsive 4D Liquid Crystal Microactuators Fabricated by Direct Laser Writing by Two-Photon Polymerization

Autores: Marc del Pozo, Colm Delaney, Marina Pilz da Cunha, Michael G. Debije, Larisa Florea, Albert P. H. J. Schenning
Publicado en: Small Structures, Edición 3/2, 2022, Página(s) 2100158, ISSN 2688-4062
Editor: Wiley-VCH GmbH
DOI: 10.1002/sstr.202100158

Direct laser writing of liquid crystal elastomers oriented by a horizontal electric field

Autores: Marco Carlotti, Omar Tricinci, Frank den Hoed, Stefano Palagi, Virgilio Mattoli
Publicado en: Open Research Europe, Edición 1, 2021, Página(s) 129, ISSN 2732-5121
Editor: European Commission
DOI: 10.12688/openreseurope.14135.2

Sweat analysis with a wearable sensing platform based on laser-induced graphene

Autores: F. Vivaldi; A. Dallinger; N. Poma; A. Bonini; D. Biagini; P. Salvo; F. Borghi; A. Tavanti; F. Greco; F. Di Francesco
Publicado en: APL Bioeng, Edición 6, 2022, Página(s) 036104, ISSN 2473-2877
Editor: AIP Publishing
DOI: 10.1063/5.0093301

Direct laser writing of vapour-responsive photonic arrays

Autores: Colm Delaney, Jing Qian, Xia Zhang, Radislav Potyrailo, A. Louise Bradley, Larisa Florea
Publicado en: Journal of Materials Chemistry C, Edición on line, 2021, ISSN 2050-7534
Editor: Royal Society of Chemistry
DOI: 10.1039/d1tc01796a

Engineering Microneedle Patches for Improved Penetration: Analysis, Skin Models and Factors Affecting Needle Insertion

Autores: Pooyan Makvandi, Melissa Kirkby, Aaron R. J. Hutton, Majid Shabani, Cynthia K. Y. Yiu, Zahra Baghbantaraghdari, Rezvan Jamaledin, Marco Carlotti, Barbara Mazzolai, Virgilio Mattoli, Ryan F. Donnelly
Publicado en: Nano-Micro Letters, Edición 13/1, 2021, ISSN 2150-5551
Editor: Open Access Science Online
DOI: 10.1007/s40820-021-00611-9

Three-Dimensional (3D) Laser-Induced Graphene: Structure, Properties, and Application to Chemical Sensing

Autores: Federico Maria Vivaldi, Alexander Dallinger, Andrea Bonini, Noemi Poma, Lorenzo Sembranti, Denise Biagini, Pietro Salvo, Francesco Greco, Fabio Di Francesco
Publicado en: ACS Applied Materials & Interfaces, Edición 13/26, 2021, Página(s) 30245-30260, ISSN 1944-8244
Editor: American Chemical Society
DOI: 10.1021/acsami.1c05614

Two-step MEMS microfabrication via 3D direct laser lithography

Autores: Omar Tricinci, Marco Carlotti, Andrea Desii, Fabian Meder, Virgilio Mattoli
Publicado en: Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIV, 2021, Página(s) 17, ISBN 9781510642287
Editor: SPIE
DOI: 10.1117/12.2579213

Shedding light on the initial growth of ZnO during plasma-enhanced atomic layer deposition on vapor-deposited polymer thin films

Autores: Demelius, Lisanne; Blatnik, Matthias; Unger, Katrin; Parlanti, Paola; Gemmi, Mauro; Coclite, Anna Maria
Publicado en: Applied Surface Science, Edición Volume 604, 2022, Página(s) 154619, ISSN 0169-4332
Editor: Elsevier BV
DOI: 10.1016/j.apsusc.2022.154619

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar