Description du projet
Réduction du poids d’abattant dans les gros avions de passagers
Le rôle de l’écoulement laminaire autour des ailes des avions est important car il réduit la résistance à la friction. Il existe des méthodes de contrôle du flux laminaire sur les ailes, mais elles ne satisfont pas aux exigences structurelles et économiques du marché. Le projet SWING financé par l’UE développera une solution de pointe pour réduire le poids de l’abattant des gros avions de passagers et contribuer à l’amélioration de l’aérodynamique. Elle sera basée sur le concept de flux laminaire hybride qui offre davantage de complexité dans la forme des ailes. Le projet développera en outre un processus efficace et rentable pour la fabrication des abattants. SWING vise à surmonter plusieurs défis sur le plan technique en développant un processus thermoplastique de consolidation in situ.
Objectif
SWING project aims to develop a material/process/design solution for a shielding flap for hybrid laminar flow control on wings of large passenger aircraft. The project target is to develop an In Situ Consolidation thermoplastic process to outperform existing process in terms of structural and economic performance. Indeed, Hybrid Laminar Flow Concept will lead to more complexity in the structure of the wings and their accessories, and therefore an efficient process to manufacture flaps are needed to enable implementation of such system with an acceptable cost.
From a technical point of view, several challenges stay on the development road :
• Selection of a thermoplastic composite pre-impregnated tape that fulfil both the design, the process and the economic requirement.
• Process parameter control strategy to guarantee in situ consolidation of composite with the nominal performance of the material for the targeted complex geometry
• Efficiency of tape laying to match with the economic equation. Efficiency includes the maximum laying speed and the gestion of start and stop (loss of time, scraps…)
• Assembly solution to create a closed wing section that include the ribs and possibly other reinforcement (for mechanical fastening, at trailing edge….).
SWING aims at overcoming these challenges with significative achievement to allow the integration of the thermoplastic flap in demonstrator wings of hybrid laminar flow control. The Krueger flap develop inside the project will impact the CO2 emissions of the Large Passenger Aircraft demonstrator through two ways : by reducing the weight of the flap thus the fuel consumption and by allowing aerodynamics optimization.
Champ scientifique
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamics
- natural sciencesmathematicspure mathematicsgeometry
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- engineering and technologyenvironmental engineeringenergy and fuels
Programme(s)
Régime de financement
IA - Innovation actionCoordinateur
60304 Senlis Cedex
France