Resultado final
It will comprise a public site and a private members’ area as a tool to ease the collaboration between partners and to share information. To be updated every three months.
Final InComEss WorkshopDescription of the main contributions from the public and stakeholders with respect to the final results of the project and in relation with next actions to be considered for fully exploitation of the results within the targeted value chain industries.
Mid-term InComEss WorkshopThis report will summarize the different contributions shown during the Midterm workshop and the feedback from stakeholders and the public ensuring to meet the project objectives in relation with the expected target markets
This report will outline a theoretical approach to materials recovery and reuse from PE/TE/SC materials combinations.
Key Performance IndicatorsThis report describes the different KPI’s that will be used for materials and systems evaluation and benchmarking along the project.
Report on the standardization landscape and applicable standardsDocument based on the identification and analysis of relevant existing standards and standardization Technical Committees and organizations that can be relevant for the activities of the project.
On-line training materialThe online training material will be a version of the training information included in the training plan D95 but excluding the confidential information and it will be made available online public section of the project website D91 to ensure training opportunities are available beyond the project consortium
Report on the contribution to standardizationD9.10.a (M9), D9.10.b (M24), D9.10.c (M42). Report on the activities performed regarding the standardization potential of INCOMESS results, collaboration with existing Technical Committees and contribution to grow new standards.
Publicaciones
Autores:
Fu, Zhao; Jauho, Aarne; Väisänen, Kaisa-Leena; Välimäki, Marja; Keskinen, Jari; Mäntysalo, Matti
Publicado en:
2022 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), Edición 6, 2022, ISBN 978-1-6654-4273-2
Editor:
IEEE
DOI:
10.1109/fleps53764.2022.9781495
Autores:
Domenico Tommasino; Federico Moro; Eneko Zumalde; Jan Kunzmann; Alberto Doria
Publicado en:
Actuators; Volume 12; Edición 1; Pages: 29, Edición 1, 2023, ISSN 2076-0825
Editor:
MDPI
DOI:
10.3390/act12010029
Autores:
Kostopoulou, Athanasia; Konidakis, Ioannis; Stratakis, Emmanuel
Publicado en:
Nanophotonics, Vol 12, Iss 9, Pp 1643-1710 (2023), Edición 5, 2023, ISSN 2192-8614
Editor:
De Gruyter
DOI:
10.1515/nanoph-2022-0797
Autores:
Beate Krause; Sarah Imhoff; Brigitte Voit; Petra Pötschke
Publicado en:
Micromachines; Volume 14; Edición 1; Pages: 181, Edición 3, 2023, ISSN 2072-666X
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/mi14010181
Autores:
Qusay Doraghi, Navid Khordehgah, Alina Żabnieńska-Góra, Lujean Ahmad, Les Norman, Darem Ahmad, Hussam Jouhara
Publicado en:
ChemEngineering, Edición 5/3, 2021, Página(s) 45, ISSN 2305-7084
Editor:
MDPI
DOI:
10.3390/chemengineering5030045
Autores:
Franco Di Persio; María Blecua; Ana Cecilia Chaine; Thomas Daue; Cintia Mateo-Mateo; Ignacio Ezpeleta; Petra Pötschke; Beate Krause; Ezgi Inci; Jürgen Pionteck; Timo Punkari; Jari Keskinen; Matti Mäntysalo; Amanda Melo; David Esteves
Publicado en:
Journal of Cleaner Production, Edición Volume 435, , 140525, 2024, ISSN 0959-6526
Editor:
Elsevier BV
DOI:
10.1016/j.jclepro.2023.140525
Autores:
Domenico Tommasino, Federico Moro, Enrique de Pablo Corona, Laura Vandi, Alessia Baietta, Alessandro Pracucci & Alberto Doria
Publicado en:
Mechanisms and Machine ScienceVolume 122 MMS, Pages 848, 2022, ISSN 2211-0984
Editor:
Springer
DOI:
10.1007/978-3-031-10776-4_97
Autores:
Ioannis Konidakis; Beate Krause; Gyu-Hyeon Park; Nithin Pulumati; Heiko Reith; Petra Pötschke; Emmanuel Stratakis
Publicado en:
ACS Applied Energy Materials, 2022, ISSN 2574-0962
Editor:
ACS Publications
DOI:
10.48550/arxiv.2208.10283
Autores:
Zhao Fu; Aarne Jauho; Kaisa-Leena Väisänen; Marja Välimäki; Jari Keskinen; Matti Mäntysalo
Publicado en:
2022 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), Vienna, Austria, 2022, pp. 1-4, 2022, ISSN 2197-1811
Editor:
IEEE
DOI:
10.1109/fleps53764.2022.9781495
Autores:
Domenico Tommasino; Federico Moro; Bruno Bernay; Thibault De Lumley Woodyear; Enrique de Pablo Corona; Alberto Doria
Publicado en:
Sensors; Volume 22; Edición 1; Pages: 363, Edición 1, 2022, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s22010363
Autores:
Zhao Fu, Markus Hannula, Aarne Jauho, Kaisa-Leena Väisänen, Marja Välimäki, Jari Keskinen, and Matti Mäntysalo
Publicado en:
ACS Appl. Mater. Interfaces 2022, 14, 35, 40145–40157, 2022, ISSN 1944-8244
Editor:
American Chemical Society
DOI:
10.1021/acsami.2c08502
Autores:
Ezgi Inci Yesilyurt; Jürgen Pionteck; Frank Simon; Brigitte Voit
Publicado en:
RSC Applied Polymers, Edición Edición 1, 2023, 2023, ISSN 2755-371X
Editor:
Royal Society of Chemistry
DOI:
10.1039/d3lp00061c
Autores:
Beate Krause; Ioannis Konidakis; Emmanuel Stratakis; Petra Pötschke
Publicado en:
ACS Applied Nano Materials, Edición Volume 6, Edición 14, 2023, ISSN 2574-0970
Editor:
American Chemical Society
DOI:
10.1021/acsanm.3c01735
Autores:
Qusay Doraghi a, Alina Żabnieńska-Góra a b, Les Norman a, Beate Krause c, Petra Pötschke c, Hussam Jouhara
Publicado en:
Thermal Science and Engineering Progress Volume 39, 1 March 2023, 101693, 2023, ISSN 2451-9049
Editor:
ELSEVIER
DOI:
10.1016/j.tsep.2023.101693
Autores:
M. Vlachos; R. Lopardo; A. Amditis
Publicado en:
Crossref, Edición 1, 2023, ISSN 2579-0099
Editor:
Tech Science Press
DOI:
10.32604/jiot.2022.040820
Autores:
Dr. Beate Krause; Petra Pötschke
Publicado en:
Nanomaterials; Volume 12; Edición 21; Pages: 3812, 2022, ISSN 2079-4991
Editor:
MDPI
DOI:
10.3390/nano12213812
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles