Skip to main content
European Commission logo
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Solutions and Technologies for deep Energy renovation Processes UPtake

Leistungen

Data infrastructure requirements for the StepUP Methodology

Public report on the key data collection requirements to enable the StepUP methodology, delivered as a protocol for broader uptake. This protocol will also consider compliance to the Smart Readiness Indicator scheme

Integrated draft of the methodology

Advanced draft of the methodology after the first year of feedback from monitoring, value chain workshops, and technology development. Released publicly for broader feedback collection

StepUP Year 2 communication report, including upcoming actions

Public report on the second year of outreach activities and the plan for the third year

Guidelines for lean P&P construction

Final publication of the guidelines for lean construction including general guidance and StepUPspecific content eg use of the PP Protocol intercompatibility of technologies as a public report

StepUP Year 3 communication report, including upcoming actions

Public report on the third year of outreach activities and the plan until the project end

StepUP Year 1 communication report, including upcoming actions

Public report on the first year of outreach activities and the plan for the second year

Drivers, challenges and opportunities in the renovation market

Public report on the renovation market based on feedback gathered from representatives of the value chain

StepUP Plug&Play Protocol

Final publication of the StepUP PlugPlay Protocol as a public report for broader uptake of the concept by technology providers

StepUP image brief and website

Public project website to disseminate all knowledge developed in the project

Veröffentlichungen

Optimised IES-VE model calibration methodology integrating IoT, smart meter and BMS data

Autoren: Adalberto Guerra Cabrera; Ruth Kerrigan
Veröffentlicht in: eSIM 2021, Online, 14-16 June 2021 (Session A-3: Parallel Session A-3 (Simulation in Practice)), 2021
Herausgeber: eSIM
DOI: 10.5281/zenodo.5084461

Improved methodology for affordable, reliable deep building renovations

Autoren: M. Orova; A Reith
Veröffentlicht in: IOP Conference Series: Earth and Environmental Science, Ausgabe 1085, 2024, ISSN 1755-1315
Herausgeber: IOP Conference Series: Earth and Environmental Science (EES)
DOI: 10.1088/1755-1315/1085/1/012003

Boosting the Renovation Wave with Modular Industrialized Renovation Kits: mapping challenges, barriers and solution strategies

Autoren: J. van Oorschot; M.S. Di Maggio; P. Op 't Veld; A. Tisov; Giulia Barbano
Veröffentlicht in: Ausgabe 5, 2022
Herausgeber: Sustainable Places 2021
DOI: 10.5281/zenodo.7541345

Implementation of a multifunctional Plug-and-Play façade using a set-based design approach

Autoren: Massip, D., Rafols Ribas, I., & Marrone, G.
Veröffentlicht in: Journal of Design Facade and Engineering - Special Ausgabe Multifunctional Façades for Renovation through Industrialization, Ausgabe Vol. 11, Number, 2023, Seite(n) pp. 71-97, ISSN 2213-3038
Herausgeber: Stichting OpenAccess
DOI: 10.47982/jfde.2023.2.t4

Computer Vision-based Reader for analogue Energy/Water Meters in low-cost embedded System: a Case Study in an Office Building in Scotland

Autoren: Guerra-Cabrera Adalberto, Barbano Giulia, Tardioli Giovanni, Mallya Udupi Girish
Veröffentlicht in: E3S Web of Conferences, Ausgabe 172, 2020, Seite(n) 25006, ISSN 2267-1242
Herausgeber: E3S Web of Conferences
DOI: 10.1051/e3sconf/202017225006

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor