Descrizione del progetto
Rafforzare la sicurezza e migliorare l’immagine dell’energia nucleare
Gravi incidenti nucleari, quali quello nella centrale nucleare giapponese di Fukushima Daiichi nel 2011, hanno evidenziato la necessità di miglioramenti della sicurezza nei moderni reattori nucleari. Un meccanismo chiave implicato nella contaminazione radioattiva durante il guasto di un reattore ad acqua leggera è il danneggiamento del rivestimento del combustibile, lo strato protettivo che si trova tra le barre di combustibile e il refrigerante del reattore. Per prevenire incidenti simili in Europa, l’obiettivo principale del progetto PLASTICERA, finanziato dall’UE, è sviluppare un nuovo rivestimento per carburante resistente agli incidenti da utilizzare nei moderni reattori ad acqua leggera. Il progetto potrebbe migliorare in modo significativo la sicurezza dell’energia nucleare e migliorare la sua immagine come strumento per combattere i cambiamenti climatici.
Obiettivo
Aim of the project PLASTICERA is to prevent nuclear accidents similar to Fukushima Daiichi from happening in Europe. Primary objective of PLASTICERA is to develop a new accident tolerant fuel (ATF) concept for modern nuclear light water reactors (LWR). Today, nuclear energy is an essential environmental issue as it is one of the key scalable technologies to battle climate change. Promoting the use of nuclear energy is largely based on public opinion and therefore creating safer and more sustainable ways to produce nuclear energy is more important than ever. The concept of PLACTICERA relies on amorphous oxide thin films to protect the primary fuel cladding from catastrophic damage during nuclear accident conditions. The oxide thin film can provide unique combination of a strong oxygen diffusion barrier with the capability to accommodate the plastic strain originating from the fuel bar thermal expansion. This functional coating could significantly delay the onset of uncontrollable degradation of the primary fuel cladding, allowing timely emergency cooling, and preventing the release of radioactive substances. The primary objective will be achieved by training Dr. Erkka J. Frankberg (fellow) with new skills in disruptive material manufacturing technologies capable of producing ceramic materials, especially amorphous oxides, with prerequisites for low temperature plasticity. These materials will then be tested for mechanical and corrosion properties in relevant environment resembling LWR normal operating conditions and conditions occurring during “loss of cooling water” (LOCA) -type accident.
Campo scientifico
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
Programma(i)
Argomento(i)
Meccanismo di finanziamento
MSCA-IF-EF-ST - Standard EFCoordinatore
16163 Genova
Italia