Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Ultra low-power integrated optical sensor systems for networked environmental multichannel gas Sensing

Project description

New technological innovations for low-cost, high-performance gas sensors

Optical nondispersive infrared (NDIR) gas sensors are more sensitive, stable and precise than market competitors. However, they are too large and costly for most applications. There is an urgent requirement for small-scale, low-power networked gas sensor systems. The EU-funded ULISSES project will develop an integrated, multi-channel optical gas sensor system on a chip (SoC) and prove its ability to detect three gases at the same time. It will create the networking technology needed to bring these SoCs to the Internet of Things. Ultimately, the project will deliver cost-efficient NDIR gas sensors that could be mass produced. What is more, power consumption will be reduced, enabling maintenance-free, battery-powered operation for the first time.

Objective

Distributed and networked gas sensing is increasingly important for industrial, safety and environmental monitoring applications. Optical nondispersive infrared (NDIR) gas sensors offer the highest sensitivity, stability and specificity in the market, but for most applications, the existing sensors are too bulky and expensive. To enable the broad utilization of high-performance gas sensor networks, there is a critical need for small, low-power and networked gas sensor systems. In ULISSES, we will develop an integrated multi- channel optical gas sensor system-on-a-chip (SoC) and demonstrate its capability to detect three gases simultaneously. Furthermore, we will develop the networking technology required to bring these SoCs onto the Internet of Things (IoT). We will implement a new edge-computed self-calibration algorithm that leverages node-to-node communications to eliminate the main cost driver of low-cost gas sensor fabrication and maintenance (the calibration). Finally, ULISSES will deliver the wafer-scale mass production methods necessary to enable production volumes of millions of sensors per year, and thus provide an order of magnitude reduction of sensor module cost. By leveraging recent breakthroughs of the ULISSES partners on waveguide integrated 2D materials-based photodetectors, 1D nanowire mid-IR emitters, and mid-IR waveguide-based gas sensing using MEMS-tunable filters, we target a three-order-of-magnitude reduction in sensor power consumption, thus permitting maintenance-free battery powered operation for the first time. Between the participants, we cover the full range of competences required for the task. The market for low cost IoT gas sensors is in its infancy, but at a 7.3% compound annual growth rate (CAGR) it is lucrative enough for players with older less specific gas sensor technologies to fight for gaining a first mover advantage. Thus, the window of opportunity for a new disruptive entry into this market is rapidly closing.

Call for proposal

H2020-ICT-2018-20

See other projects for this call

Sub call

H2020-ICT-2018-2

Coordinator

SENSEAIR AB
Net EU contribution
€ 697 487,50
Address
PO BOX 96
820 60 Delsbo
Sweden

See on map

SME

The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.

Yes
Region
Norra Sverige Norra Mellansverige Gävleborgs län
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 697 487,50

Participants (7)