Risultati finali
Description of the design of the cooling system, and of its integration with e-axle components. Link to WP4, Tasks 4.1/4.2/4.4.
Quality and data management plan, contracts and reportsDescription of the quality and data management procedures undertaken in the project, including harmonised contracts and reports guidelines. Link to WP8, Task 8.1.
Project website, communication strategy and draft exploitation planDescription of the project website and on-line launch, of the project communication strategy (including synergy with other RDI) and draft exploitation plan of the e-axle components. Link to WP7, Task 7.2.
Integration of the components and bench qualificationReport on firstbench mechanical and electrical qualification of the eaxle componentsLink to WP5 Task 5253
E-axle assessment report (TRL, MRL, cost and LCA)Expost assessment of the TRL and MRL of the eaxle including cost breakdown and cost saving and full eaxle LCALink to WP6 Task 64
Report on the prototyping of the componentsReport on prototyping of the different e-axle components, including description and classification (e.g. serial no.) of the units (CAD/schematics are included, if applicable). Link to WP5, Task 5.1.
Final report and summary of dissemination and communication activitiesFinal technical report project wrapup and final assessment of the effectiviness of the communication actionsLink to WP7 Tasks 7172737475 and WP8 Tasks 81828384
Vehicle testing reportReport on the testing results of the vehicle including WLTP energy consumption test driving range test charging tests and sequence of 3 full driving range test plus three full super fast recharges for demonstrating 1000 km drivingdayLink to WP6 Task 63
Mid-term report on dissemination and communication activitiesM18 report on the dissemination and communication activities (update of the initial plan, objectives reached, adjustments, if needed). Link to WP7, Task 7.1.
E-axle specification inputInput for the e-axle as per results of the preliminary design phase, including end-user requirements and manufacturability/recyclability criteria. Link to WP3, Task 3.1.
Dissemination and innovation management strategyDefinition of the detailed dissemination and innovation management strategy Link to WP7, Task 7.1.
Electrical architecture and interfacesDescription of the overall electrical architecture of the vehicles, including schematics, of the battery-power electronics-e-motor wiring. Link to WP2, Task 2.3
Exploitation strategyDescription of the exploitation strategy of the e-axle components. Link to WP7, Task 7.3.
Reliable and scalable design ready for mass manufacturing and dismantlingDescription of ab-initio design criteria for manufacturing and dismantling of the e-axle. Link to WP1, Tasks 1.3/1.4.
Driving cycles specification and end-user requirementsDefinition of the driving cycle and testing procedures; definition of the requirements of the OEM, based on the customer demands. Link to WP1, Task 1.1.
Pubblicazioni
Autori:
T. Dimier; M. Cossale; T. Wellerdieck
Pubblicato in:
Proceedings of 2020 International Conference on Electrical Machines (ICEM), 2020, Pagina/e 1-6, ISBN 978-1-7281-9945-0
Editore:
IEEE
DOI:
10.1109/icem49940.2020.9270943
Autori:
Paolo Pescetto; Andres Sierra-Gonzalez; Elena Trancho; Gianmario Pellegrino
Pubblicato in:
Proceedings of 2021 IEEE Energy Conversion Congress and Exposition (ECCE), 2021, Pagina/e 6, ISBN 978-1-7281-5135-9
Editore:
IEEE
DOI:
10.1109/ecce47101.2021.9595681
Autori:
Andres Sierra-Gonzalez; Paolo Pescetto; Elena Trancho; Edorta Ibarra; Gianmario Pellegrino; Fernando Alvarez-Gonzalez
Pubblicato in:
Proceedings of 2021 IEEE Energy Conversion Congress and Exposition (ECCE), Numero 1, 2021, Pagina/e 6, ISBN 978-1-7281-5135-9
Editore:
IEEE
DOI:
10.1109/ecce47101.2021.9595399
Autori:
Eric Armengaud; Omar Hegazy; Bernhard Brandstätter; Valentin Ivanov; Reinhard Tatschl; Michele De Gennaro; Aldo Sorniotti; Joeri Van Mierlo; Christof Schernus
Pubblicato in:
IEEE International Conference on Connected Vehicles and Expo (ICCVE), 2019
Editore:
IEEE
Autori:
Michele De Gennaro, Peter Scheuermann, Tobias Wellerdieck, Vittorio Ravello, Gianmario Pellegrino, Elena Trancho
Pubblicato in:
TRA 2020, 2020
Editore:
TRA 2020
Autori:
Michele De Gennaro, Patrick Buechel, Alfredo Primon, Oreste Bertini, Paolo Pescetto, James Hoyles Page
Pubblicato in:
EVS 33, 2020
Editore:
EDTA
Autori:
Mariapia Martino; Paolo Pescetto; Gianmario Pellegrino
Pubblicato in:
Proceedings of International Conference of Electrical and Electronic Technologies for Automotive, 2020, Pagina/e 6, ISBN 978-8-8872-3749-8
Editore:
IEEE
DOI:
10.23919/aeitautomotive50086.2020.9307382
Autori:
Paolo Pescetto; Gianmario Pellegrino
Pubblicato in:
Proceedings of 23rd International Conference on Electrical Machines and Systems 2020 (ICEMS), Numero 1, 2020, Pagina/e 1-6, ISBN 978-4-8868-6419-2
Editore:
IEEE
DOI:
10.23919/icems50442.2020.9290958
Autori:
Paolo Pescetto; Gianmario Pellegrino
Pubblicato in:
Proceedings of 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, Pagina/e 1-6, ISBN 978-1-7281-5826-6
Editore:
IEEE
DOI:
10.1109/ecce44975.2020.9235950
Autori:
Paolo Pescetto; Gianmario Pellegrino
Pubblicato in:
Proceedings of IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, 2021, Pagina/e 6, ISBN 978-1-6654-3554-3
Editore:
IEEE
DOI:
10.1109/iecon48115.2021.9589656
Autori:
Page, J., De Gennaro, M., Müller, A., Kerschbaumer, M. et al.
Pubblicato in:
SAE WCX Digital Summit, Numero 01487191, 2020, ISSN 0148-7191
Editore:
SAE International
DOI:
10.4271/2021-01-0985
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile