Descrizione del progetto
La rimozione dei ritardanti di fiamma tossici favorisce il riciclaggio e il riutilizzo dei materiali
I ritardanti di fiamma sono sostanze chimiche aggiunte ai materiali per prevenire l’inizio o lo sviluppo di un incendio. Sono stati utilizzati in una miriade di prodotti di consumo e da costruzione a partire dagli anni ’70, ma molti sono stati ora vietati perché possono rimanere nell’ambiente per anni, accumulandosi nel tempo a livelli tossici. I ritardanti di fiamma bromurati (BFR) sono tra questi e CREAToR sta sviluppando un processo per rimuoverli dai materiali di scarto dei settori dell’edilizia e costruzioni e delle apparecchiature elettriche ed elettroniche. Ma non è tutto: il progetto darà vita a un’economia circolare, rivalorizzando i materiali «puliti» per utilizzarli in nuovi pannelli isolanti per l’edilizia e creando un percorso per riutilizzarli nei settori automobilistico e aerospaziale.
Obiettivo
CREAToR focusses on process development and demonstration (to TRL 5) to remove hazardous, already banned bromine-containing flame-retardants from waste streams using continuous purification technologies (supercritical CO2 and cost-effective solvent-based processes using natural deep eutectic solvents (NADES)) in twin-screw extruders. CREAToR will cover the whole value chain, starting from collecting thermoplastic waste streams from building and construction (B&C) and from waste electrical and electronic equipment (WEEE). Respective recyclers and sorters of both industries are part of the CREAToR consortium. The project will implement ways to collect secondary raw materials, identify the presence of hazardous flame retardants, remove these contaminants from the materials and finally reuse the materials. As case studies they will be reused as valuable secondary raw materials for new B&C insulation panels, closing the circle of economy, for automotive interior application, and for producing 3 D printed parts for aerospace applications. The respective end user partners are also part of the CREAToR consortium. For further increasing the economic feasibility of the approach an optimised logistic concept and a harmonized material quality classification scheme will be developed and applied. CREAToR will create a circular economy solution, transforming waste streams that are currently incinerated at costs of >180 €/t (especially from the B&C and WEEE sector) into value-bringing secondary raw materials. The economic viability of CREAToR will be validated through material benchmarking and LCA/LCC assessment for the whole value chain resulting in next generation products. The strong industrial/recycler presence in the consortium (12 industrial partners, among them three recyclers, six SMEs, and six large enterprises) will ensure the market relevance of the developments and the rapid commercialisation of the results within 1-2 years after the end of the project.
Campo scientifico
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
Parole chiave
Programma(i)
- H2020-EU.3.5. - SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials Main Programme
- H2020-EU.3.5.4. - Enabling the transition towards a green economy and society through eco-innovation
- H2020-EU.3.5.3.2. - Promote the sustainable supply and use of raw materials, including mineral resources, from land and sea, covering exploration, extraction, processing, re-use, recycling and recovery
Argomento(i)
Meccanismo di finanziamento
RIA - Research and Innovation actionCoordinatore
80686 Munchen
Germania