Recycling and Repurposing of Plastic Waste for Advanced 3D Printing Applications

Informazioni relative al progetto

Repair3D

ID dell’accordo di sovvenzione: 814588

DOI 10.3030/814588

Progetto chiuso

Data della firma CE 12 Dicembre 2018

Data di avvio 1 Gennaio 2019

Data di completamento 31 Maggio 2023

Finanziato da

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials

Costo totale € 5 998 832,50

Contributo UE € 5 998 832,50

Coordinato da

WARRANT HUB SPA
Italy

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Websites, patent fillings, videos etc. (5)

Project logo, leaflets and website
Report on Summer school and Training for Consumer Best Practices and Societal impact for circularity of materials use activities

The final version of deliverable will be submitted at M45 although the periodic progress of the work will be delivered through reports scheduled at M10 M19 that will be included in the periodic reports that will be submitted to the EC Therefore M1M18 periodic report will include the update scheduled at M10 The M19M36 periodic report will include the update scheduled at M19

Open-day exploitation and dissemination workshop

Openday exploitation and dissemination workshop

Communication Plan
End of project open-day exploitation and dissemination workshop

End of project openday exploitation and dissemination workshop

Documents, reports (1)

The potential of AM technologies for processing recycled materials

Pubblicazioni

Peer reviewed articles (9)

Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case

Autori: Stratos Saliakas, Spyridon Damilos, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis and Elias P. Koumoulos
Pubblicato in: Polymers, Numero 15(13), 2023, Pagina/e 2836, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym15132836

A systematic study of electrolyte effect on exfoliation efficiency and green synthesis of graphene oxide

Autori: Georgios Konstantopoulos, Eleni Fotou, Afroditi Ntziouni, Konstantinos Kordatos, Costas A.Charitidis
Pubblicato in: Ceramics International, Numero 47 (22), 2021, Pagina/e 32276-32289, ISSN 0272-8842
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2021.08.122

Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications

Autori: Maria Kanidi, Niki Loura, Anna Frengkou,Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, Costas Charitidis
Pubblicato in: J. Compos. Sci., Numero 7(2), 2023, Pagina/e 74, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs7020074

Leaching of Nano-Additives as a Method for Life-Cycle Suitability: A Study on 3D-Printed Nanocomposites for Wearables Applications

Autori: Iakovos Gavalas, Despoina Ntenekou, Anna Karatza, Spyridon Damilos, Stratos Saliakas, Elias P. Koumoulos
Pubblicato in: Processes, Numero 11(7), 2023, Pagina/e 2053, ISSN 2227-9717
Editore: MDPI
DOI: 10.3390/pr11072053

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autori: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Pubblicato in: Journal of Composites Science, Numero 3/3, 2019, Pagina/e 86, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs3030086

Ready-to-Use Recycled Carbon Fibres Decorated with Magnetic Nanoparticles: Functionalization after Recycling Process Using Supercritical Fluid Chemistry

Autori: Sophie Martin , Tatjana Kosanovic Milickovic , Costas A. Charitidis and Sandy Moisan
Pubblicato in: Journal of Composite Science, 2023, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs7060236

Effect of crosslinker to monomer ratio on the adhesion and size distribution of silver nanoparticles grown on poly (methacrylic acid) microspheres

Autori: P. Kainourgios, P. Maroulas, C.A. Charitidis
Pubblicato in: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Numero 662, 2023, Pagina/e 131002, ISSN 1873-4359
Editore: Elsevier
DOI: 10.1016/j.colsurfa.2023.131002

Development of CNT-Based Nanocomposites with Ohmic Heating Capability towards Self-Healing Applications in Extrusion-Based 3D Printing Technologies

Autori: Niki Loura, Eleni Gkartzou, Aikaterini-Flora Trompeta, Georgios Konstantopoulos, Panagiotis A. Klonos, Apostolos Kyritsis, Costas A. Charitidis
Pubblicato in: C, Numero 9(4), 2023, Pagina/e 111, ISSN 2311-5629
Editore: MDPI
DOI: 10.3390/c9040111

Antibacterial Interactions of Ethanol-Dispersed Multiwalled Carbon Nanotubes with <i>Staphylococcus aureus</i> and <i>Pseudomonas aeruginosa</i>

Autori: Mihaela Asaftei, Massimiliano Lucidi, Stefan Razvan Anton, Aikaterini-Flora Trompeta, Radu Hristu, Denis E. Tranca, Efstathios Fiorentis, Cristina Cirtoaje, Veronica Lazar, George A. Stanciu, Gabriella Cincotti, Paola Ayala, Costas A. Charitidis, Alina Holban, Paolo Visca, Stefan G. Stanciu
Pubblicato in: ACS Omega, Numero 9, 2024, Pagina/e 33751-33764, ISSN 2470-1343
Editore: ACS Publications
DOI: 10.1021/acsomega.4c03044

Conference proceedings (4)

3D printed CFRPs and micro-composite products by design from recycled resources

Autori: T. Kosanovic Milickovic, W. Van De Steene, L. Cardon, C. Charitidis
Pubblicato in: 2019
Editore: 9th EASN International Conference on Innovation in Aviation & Space

Composite materials circular economy: the case of 'green' fibres and nanoenhanced fibrous polymer composites

Autori: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Pubblicato in: 2019
Editore: EuroNanoForum 2019

Novel Method For Unpolymerized Prepreg Recycling Using Supercritical CO2 Extraction.

Autori: Sophie Martin, Henry-Pierre Guriec, Sandy Moisan
Pubblicato in: 2022
Editore: ECCM
DOI: 10.5075/epfl-298799_978-2-9701614-0-0

Chain extension of recycled polyethylene terephthalate (PET) via reactive extrusion for additive manufacturing applications

Autori: Theodoros Gikarakis, Christos Tsirogiannis, Christina Podara, Eleni Gkartzou, Aikaterini-Flora Trompeta and Costas Charitidis
Pubblicato in: Polymer Process Innovation Conference 2023, 2023
Editore: University of Minho

Thesis and dissertations (1)

Development of nanocomposites with self-sensing and self-healing properties for use in Additive Manufacturing technologies

Autori: Niki Loura
Pubblicato in: 2021
Editore: NTUA
DOI: 10.26240/heal.ntua.21796