Objective
Production of electrical insulation components is globally a B$1.19 business. Cellulose is one commonly used raw material for insulation components. State-of-the-art production methods for high quality electrical insulation products are typically labour intensive and slow.
The main objective of NOVUM is to develop and demonstrate a compact and feasible pilot line concept based on novel processing technologies for rapid, design driven production of advanced cellulose-based electrical insulation components. This new pilot line will result in significant efficiency improvement and higher productivity and flexibility, while ensuring lower operational costs as compared with the state-of-the-art process. Manual production will be replaced by an automated manufacturing concept with increased resource efficiency, including 40% reduction in labour time and 60% reduction in waste generation, 20% lower energy consumption and 40% decrease in operating costs.
Processing technologies in the focus of NOVUM are 3D printing of cellulose-based materials having thermoplastic features as well as foam forming and thermoforming of cellulose fibres. These three technologies will be developed in parallel to each other, together with the cellulose materials, in order to reach optimal combination for the pilot line concept. Besides technical feasibility, the decision on the pilot line concept will be based on the end use requirements as well as on economic, social and environmental impacts including circular economy considerations.
The novel manufacturing concept will also enable exploitation of the full potential of design in generating form and thus novel functionalities to cellulose-based electrical insulation components. In addition, the concept will be based on multipliable technologies, enabling their transition and wide adoption for cellulose-based materials across the process industry and for applications beyond NOVUM for other industrial areas.
Fields of science
Not validated
Not validated
Keywords
Programme(s)
Topic(s)
Funding Scheme
IA - Innovation actionCoordinator
02150 Espoo
Finland
See on map
Participants (15)
Participation ended
04 713 WARSZAWA
See on map
Participation ended
3550 Slangerup
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
06000 Nice
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
24240 Salo
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
81 571 Gdynia
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
CV1 2TT Coventry
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
30-059 Krakow
See on map
73494 Rosenberg
See on map
Participation ended
59166 BOUSBECQUE
See on map
30 199 Rzaska
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
04-713 Krakow
See on map
20240 Turku
See on map
10043 Orbassano
See on map
20520 TURKU
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
06200 Nice
See on map