Resultado final
This report will collect information related to the portability of the failure modes for diagnosisprognosis orientations
Report on SoA monitoring technology and specification of the support structure monitoring problem for offshore WFThis report will gather the main outputs of the State of the Art analysis carried out with the main aim of identifying the key structure monitoring problems for offshore Wind Farms.
Architecture and Data FrameworkThis document will gather the main results generated within the development of the data architecture. It is related to the task 5.1.
Report reviewing existing cost and O&M support models and developing an innovative cost model, also considering statistical modelling of key variablesThis deliverable will collect information related to the main existing tools/strategies implemented in areas such as cost models and O&M decision support tools.
Report on innovationsThis report will gather the main innovations developed throughout the life of the ROMEO project
(5) Report on dissemination and communication activitiesThis report will monitor the impact of dissemination and communication activities developed in the project
Final report on best practice guidelines for future wind farm structural condition monitoring using low-cost monitoringThis report will consist of a guideline of best practices for the future penetration of lowcost monitoring approaches within WF structural conditioning monitoring
Use-case demonstration into O&M platformThis report is related to the task 6.5 and will collect information produced in the demonstration phase of the O&M platform.
Plan for the Dissemination of ResultsThis deliverable will establish the basis for the development of common dissemination & exploitation plan in the project.
Report on Life Cycle Assessment of O&M activities offshore with a detailed inventoryThis document will gather the results produced in the LCA of O&M activities in offshore. This deliverable is related to the task 8.1.
Failure mode diagnosis/prognosis orientationsThis report will collect information related to the failure modes for diagnosis/prognosis orientations.
This deliverable will consist of an integrated cost model tool capable to quantify the benefits of applying effective O&M practices to optimise the CAPEX to OPEX ratio.
This deliverable will be the website of the project.
Publicaciones
Autores:
Sofia Koukoura, Matti Niclas Scheu, Athanasios Kolios
Publicado en:
Reliability Engineering & System Safety, Edición 208, 2021, Página(s) 107404, ISSN 0951-8320
Editor:
Elsevier BV
DOI:
10.1016/j.ress.2020.107404
Autores:
Dawid Jakub Augustyn; Ursula Smolka; Ulf T. Tygesen; Martin Dalgaard Ulriksen; John Dalsgaard Sørensen
Publicado en:
Applied Ocean Research, 2020, ISSN 0141-1187
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.apor.2020.102366
Autores:
Ravi Pandit; Athanasios Kolios
Publicado en:
Applied Sciences, Edición 10/23, 2020, ISSN 2076-3417
Editor:
MDPI
DOI:
10.5281/zenodo.7426396
Autores:
Matti Niclas Scheu, Lorena Tremps, Ursula Smolka, Athanasios Kolios, Feargal Brennan
Publicado en:
Ocean Engineering, Edición 176, 2019, Página(s) 118-133, ISSN 0029-8018
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.oceaneng.2019.02.048
Autores:
Ravi Kumar Pandit; Athanasios Kolios; David Infield
Publicado en:
IET Renewable Power Generation, Edición 13/14, 2020, Página(s) 2386-2394, ISSN 1752-1416
Editor:
Institution of Engineering and Technology
DOI:
10.5281/zenodo.7427083
Autores:
D. Cevasco; J. Tautz-Weinert; U. Smolka; A. Kolios
Publicado en:
Journal of Physics: Conference Series, Edición 1669, 2020, Página(s) 012021, ISSN 1742-6588
Editor:
Institute of Physics
DOI:
10.5281/zenodo.7426474
Autores:
D. Cevasco; J. Tautz-Weinert; A. J. Kolios; U. Smolka
Publicado en:
Journal of Physics: Conference Series, Edición 1618, 2020, Página(s) 022063, ISSN 1742-6588
Editor:
Institute of Physics
DOI:
10.5281/zenodo.7426496
Autores:
D. Cevasco; J. Tautz-Weinert; M. Richmond; A. Sobey; A. J. Kolios
Publicado en:
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 2022, ISSN 2332-9017
Editor:
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering
DOI:
10.1115/1.4053659
Autores:
Assaf, Roy; Giurgiu, Ioana; Bagehorn, Frank; Schumann, Anika
Publicado en:
2019 IEEE International Conference on Data Mining (ICDM), 2020
Editor:
2019 IEEE International Conference on Data Mining (ICDM)
DOI:
10.1109/icdm.2019.00106
Autores:
Kolios, Athanasios J.; Smolka, Ursula
Publicado en:
RAMS 2020 Conference, Edición 3, 2020
Editor:
RAMS 2020 Conference
DOI:
10.5281/zenodo.3861008
Autores:
Roy Assaf, Anika Schumann
Publicado en:
Proceedings of the Twenty-Eighth International Joint Conference on Artificial Intelligence, 2019, Página(s) 6488-6490, ISBN 978-0-9992411-4-1
Editor:
International Joint Conferences on Artificial Intelligence Organization
DOI:
10.24963/ijcai.2019/932
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles